Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

Similar Messages

Voice memos app not saving properly

I am using an iphone5 running iOS7.1.1 and performing the following actions will cause Voice Memos app not saving recordings. I have sent a feedback to Apple but is wondering if anyone else is found having similar problems.
1) Run Voice memos app and start recording
2) At lock screen open camera app and take a picture
3) At same lock screen delete the picture taken
4) Lock screen will show RECORDING in progress
5) Open Voice memos app and it will also show RECORDING in progress
6) Save voice memo from app and the duration FROM the point of picture deleted WILL NOT be saved

same here ... iPhone 3gs/32 gigs ram/ios 4.3.1 ...
the app doesn't seem to work any more, and hasn't for some time:
"buttons" are unresponsive, or they appear to respond, but don't perform their function ... erratic behavior ...
very disappointing as this has gone on for some time ...
We appear not to be the only ones ...
Anyone with a solution?
Thanks

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

ABAP - BDC transaction not saving changes to records

I am trying to write my first ABAP code using BDC recording. Essentially I would like to flag the "Final Delivery" field (EKPO-EGLKZ) for a range of documents by recording transaction MASS.
The code runs without errors - but the changes are not saved. I have run the code in "Processing Mode: A" (Display all screens) and the program successfully loops through each record & saves the updated fields. When I look at the documents in ME23N the changes have not been saved.   Running the MASS transaction manually results in the changes being successfully saved so I can rule out any data validation issues.
Does anyone know why the changes refuse to save when running the code below?
I have considered trying to use BAPI_PO_CHANGE instead of BDC, but I am new to ABAP and I thought the BDC code would be less complex.
report Z_MASS_REMOVE_FDI_DCI
       no standard page heading line-size 255.
include bdcrecx1.
TYPES: BEGIN OF ty_tab,
MASSOBJTYP(7),
MASSVARNAM(7),
DOCNO(9),
ITEM(1),
END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab.
DATA : wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'X:\STO.TXT'
* FILETYPE = 'ASC
has_field_separator = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-MASSOBJTYP,
wa_tab-MASSVARNAM,
wa_tab-DOCNO,
wa_tab-ITEM.
PERFORM open_group.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MASSSCREEN-OBJECT'
                              wa_tab-MASSOBJTYP.
perform bdc_field       using 'MASSSCREEN-VARNAME'
                              wa_tab-MASSVARNAM.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEXT'.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_field       using 'MASSFREESEL-LOW(01)'
                              wa_tab-DOCNO.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(02)'.
perform bdc_field       using 'MASSFREESEL-LOW(02)'
                              wa_tab-ITEM.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CRET'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FDAE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSMSGLIST' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                              'REOML-MSGTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EXIT'.
perform bdc_transaction using 'MASS'.
ENDLOOP.
PERFORM close_group.

Where is BDC_INSERT.
If u use OPEN and CLOSE_group u need to use INSERT_GROUP also to update in database.
A session will be created and u nedd to run the Session in Sm35 in order to update the database.
Edited by: Ranjith Kumar on Sep 18, 2008 6:41 AM

Mail not saving changes in Mailbox Behaviors

For one of my accounts since the upgrade to Mavericks when I enter the Mailbox Behaviors section, I found that Drafts, Junk and the one under Trash named Store Deleted messages on the server is checked.
I uncheck them because I doon't want them checked. I Save the changes I made then go back to that account and the same ones I just unchecked are now checked again. Its not saving what I just unchecked.
What the heck is wrong?
Also noticed that in OSX 10.8 I could drag all my email accounts to a different order than the way they are now listed. Can't do that now.

Thanks for discovering this issue being connected to drafts. I have trouble with this for a couple of months as well.
Since you assume it to be connected to "drafts", I suggest to deselect "Store draft messages on the server" for your IMAP-Account. I just did this for myself, to see if it helps, and can't give you results yet. Maybe you just wanna try simultaneously. I guess, the reason for our problem could me some messy communication between Mail and the server, where one party get's confused.
Greetings
Paul

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

Stocks app not displaying news since update

Since updating iphone 5 32GB to ios 8 the stocks app has stopped displaying news for any of the stock symbols. Price graph and stats are still displayed. I found this to be a very useful feature and long to have it back.

What happens if you click the arrow next to 9 Updates Available?
Could these 9 updates not be available until you first upgrade to Mavericks?
Since you are running a legacy version of OS X, it is difficult for those of us running current versions to assist you. I am requesting the the ASC Hosts move your topic to the OS X 10.6 forum where folks also running this legacy version frequent and are more likely able to assist in figuring out what you are encountering.
In my experience, the answer to your question is no, Apple has not become a control freak with updates.
BTW, you can't be running 10.6.5 as there is no Mac App Store available for the old version of OS X.

Disney junior app, not saving daughters profile and some of the games?

Daughter has Disney game apps downloaded, but since yesterday some of the apps have to be re-installed to use, not saved to ipad like they normally do and her profile is wiped everytime she goes back into the Disney junior app. There is space in storage and i have checked settings and cannot see anything that would stop this.

What do you mean by: "not loading completely"?
Maybe this:
- Reset the iPod, nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- The remaining items of:
iOS: Troubleshooting applications purchased from the App Store
- Last, restore the iPod

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

Keynote (and other iWork apps) not saving properly!

Hi all
I have had some strange problems over the last few weeks where I get messages telling me that iWork (usually Numbers) cannot save the files as 'something else' is using the file. So I click 'save anyway' and I get strange files in folders, ie folder and file name is the original name plus some gooblygook.
I have got round this by deleting the 'extras' and carrying on. But now I am preparing a major presentation in Keynote and suddenly it is not saving graphics some of the time!
For example I was working on a slide - and suddenly got a message that 'some problems occured' -
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
Couldn’t save image. - image.png (Slides: 12, 13, 17, 18; Skipped slide count: 1)
I have been working with this presentation for some time and have never encountered any problems - passing between my laptop and my iPad to review and modify (mainly viewing on the iPad and editing on the MacBook).
Any ideas what is happening? I have a major presentation to give in just over a week and I don't want to use PowerPoint!
Thanks
Ian

I've been having some success NOT using any files that have previous images or audio in them, starting from a base template and then adding audio and video and photos that are already on my hard drive, not previous Keynote files. Today I needed five slides that were part of another deck and, you guessed it, they were corrupted (or missing) when I reopened the file, only the thumbnails remaining.
I closed the original Keynote file, placed a zip extension, then control- clicked to see the contents. The images were missing from the package. I then replaced the extension with .key and reopened in Keynote. The audio file had been there but not the images or the drawing, which I then searched for.
Yes, delete the weird file backups and make a backup of the original in the finder. Then lock it! (You're using Mountain Lion?)
I have a huge presentation tomorrow. I have five backups, including on a thumb drive.
How much longer Apple?

Textedit.app not saving

1. Open textedit.app.
2. paste in text.
3. convert to plain text.
4. hit save to desktop. give filename. hit ok.
5. program pauses for a moment, but not longer than 10 seconds.
6. switch to desktop.
7. file non-existant.
8. repeate steps 1-7. 5 times. same result.
9. change destination location. same result.
10. Open existing document (that I created using these same steps 1 minute prior). Duplicate. Change name. Paste in text. Save.
11. File is where it's expected to be.
I think there is something whacky or a bug going on here.

Sorry.
Click Desktop (or Documents, or any other folder).
Click Save.
Noting is saved, and the document still shows it's Untitled in the title bar.
after pressing save, the doc still shows Untitled, and nothing new is placed on the desktop.

Question: Not saving changes

Hi,
I saved some changes to a pdf document (highlighting, added text, free-hand drawing), but when I transfer it to my laptop (using my USB cable) the changes are gone (that is, I do not see the changes in my laptop using Adobe Acrobat Professional or any other PDF viewer).
What can I do?
Thank you

Hi Ricardo,
Were you able to see those changes when you open that document in Adobe Reader on your device itself? If yes, could you please mail that document to us at DL-adobereader-android [email protected]<mailto:[email protected]> to help us investigate the issue.
Please include this forum thread link in your email for reference.
Thanks,
-Reader Mobile Team

Stocks App not saving changes

Similar Messages

Maybe you are looking for