Stocks data is doubled for two Materials

Hi All,
I have 2 materials within a plant, and the closing stock for those materials has gone wrong (doubled in cube).
Fortunately, the correct data is available till my Integration layer DSO (DSO present very next below to the Cube).
so, my DSO data is matching with Source system's MB5B tx code.
since only in cube it is doubled, i thought of going for a selective deletion of these Materials to that specific period. and then selectively loading these materials into the cube again.
But Problem is when i go for selective deletion for the cube, I am not getting any Time Characteristics for selective deleition which is very much required for me. (like 0FISCPER, 0CALDAY are not available.)
Could anyone suggest me how to correct this scenario.
Regards
Dileepkumar Tatti

Dear Dileep
If you are sure that you have problem with only 2 materials, you can try loading a flat file or use the program CUBE_SAMPLE_CREATE to punch in the -ve values for the material which is doubled.
Regards
Gajesh

Similar Messages

  • Sales/Stock data via IDOC for replenishment

    How to capture customer sales and stock data through IDOC for customer replishnment.
    We want to see stock update in Tcode WVM4 (w10t --> Logistics  -->  Retailing -->  Sales  -->
    Replenishment  --> Overview > Stock / Sales> WVM4).I am not sure the correct way to resolve this issue.
    We have the flat file, which need to be uploadin our sap database table, so we can use it in customer specific replinshment.
    I have followed below step to achieve this target.
    Process followed:- Idoc Inbound
    Step1) Created segemt WE31 based on our file data
    step2) Creation of Idoc type we30
    step3) Created Msg type we81
    step4)Assign Message type to idoc type WE80
    what other/new step is required to complete this requirement? We don't need any ALE connection, since we have flat file in out local system

    Nishant,
    This is NOT the way IDOCS are to be used. When you want to communicate between two SAP systems, you recieve a info from a middleware you use IDOCS.
    Here if you want you can read the data and call the concerened BAPI, to create the Sales order.
    regards,
    Ravi
    Note : Please mark the helpful answers

  • Single shipment for Two materials

    hi ,
    the scenario is  we have  a situation
    whre two material are made in two diffferent plants
    but the customer orders these two materials in a single sales order
    normally what happens is when ever tihis situation occurs, the material which is manufactured in plant B is sent to plant A and in plant A both the materials are consolidated and sent in a single shipment
    we need to automate this process
      when ever we enter both the materials the system needs to know that the second material which is manufactured in plant B needs to be sent to Plant A
    and the delivery for the material in plant A has to wait until the material from plant B comes.
    When you create sales order for two materials, the stock transfer should happen automatically.
    Thanks
    Munna

    hey
    why do you need the automation? i mean when you can solve it through standard..
    you can go through MMSTO . as material is maintained in different plants and you ll be sending the goods through the Shipping point maintained at Plant A ( where material A is produced) right?   but if you ve 2 shipping points the delivery will split but still you can send it through single shipment iff you ve a single transportation planning point... give a thought there is no need of automation unless the organisation say so...
    hope it has helped u a bit
    regards
    chetan

  • Data not updating for raw materials only in cube level

    HI all gurus,
    we have flow like ods1->ods2->cube1,cube2 and cube3.
    In ods1 we mapped ZMATERIAL WITH OMATERIAL.
    In ods2 we mapped zmaterial with zmaterial directly.
    In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules  0mat_type is master data attribute of zmaterial.
    But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
    But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
    what could be the problem.
    I checked the Attribute change run.
    I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
    Please help and i will definitely assingn the points.
    It's very urgent becauz total my development work is stopped.
    Thanks & regards,
    Kumar.

    Hi,
    Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
    Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
    PB

  • Material Ledger for two materials

    Hi,
    I need to run the Material Ledger for two specific materials. In CKMLCP not have the field to select the materials.
    In this case what should I do?
    hugs,
    Cristiane.

    Hi Cristiane,
    some steps in CKMLCP also have own transaction codes and these allow to be run fro selected materials
    CKMH Single-Level Price Determination
    CKMI post closing
    multi-level allows the material selection in the parameters when you go to edit - allow postprocessing options
    best regards, Udo

  • Dat Gaurd Observer for two LAN intefaces

    Hi All,
    We have a primary and standby database configuration on two solaris machines.
    In both the machines there are two LAN interfaces.
    Applicaitions can login to the primary database using any one of the interface.
    We are facing an issue that we could start the observer for only one interface.and Datagaurd cannot do automatic failover if the unobserved interface is down.
    My questions are
    1) Is it possible to start a second observer on a LAN interface different from the first observer?
    2) Can observer be configured to observer the database through both the
    interfaces?
    Regards,
    Vimal

    1. 7-row keyboard layout (at least optional), including mechanical trackpoint buttons
    2. 16:10 or 4:3 or 3:2 display aspect ratio
    3. IPS or PLS display with at least 900 vertical pixels
    4. Thinner display bezel
    5. 4G/LTE WWAN option for European region (AirPrime MC7710 etc.)
    6. DisplayPort (no HDMI)
    7. Better cooling (at least as good as X31 was) and silent fan
    8. LAN connector on the back side
    Do not remove LAN
    Do not remove USB ports
    Do not remove DisplayPort
    Do not remove audio jack
    Get rid of VGA
    Make webcam, fingerprint reader and touchpad optional (i.e. 7-row keyboard layout without touchpad or 6-row with touchpad).

  • Two materials in different pC

    Hi All,
    Document splitting on PC level is active.While doing MIRO for two materials having Different Profit Centers,sytem is giving error-"Balancing Field Profit center in line item 001 not filled".
    Should it not split vendor line into two having the 2 diff PCs,since we cannot enter PC in vendor Line Item.
    Please advise..
    regards,

    Hi,
    I am not sure about version 10 - i've jumped from 8.5 to 9 and them to 11 R2...
    However at one time i needed to have:
    Version 8.5 and version 9 and version 11 R2 all in the same PC and it works (at least for create and change reports -  for development i was using only v.11).
    Of course, if i open a report with double-click, it was opened by v11; so for v.8.5 and v.9 i open the editor first and then opened the report.
    My major care was to setup the products in order: V8.5 first, then SPs for this version, then 9, etc.
    Hope this helps!
    Carlos Crespo

  • Two materials with the same EAN

    We use standard and promotional material code with the same EAN. The issue we should solve is that EDI recognises the material based on the EAN code. In the Order message I need material_1 during promotional period and material_2 when the promotion finished. Is there a flag somewhere in MM to block material for EDI orders? (Sales staff doesn't want to change the EAN code, so it will be the same for two materials.)

    Also note that this type of configurtion may not be supported.
    Just because a given configuration works in certain given conditions does not mean that it would be supported.
    If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

  • Number range error for some materials when converting into Production order

    Hi,
    Please I need some help with my error.
    When trying to convert planned orders into production orders, I receive an error message saying Internal assignment not defined for number range XX.
    The strange part is that is only happening for two materials! Material type is the same one we always use.
    The planned orders have also the same type.
    Any idea?
    Thanks,

    Hi,
    I think for these 2 materials system is selecting the order type for which external number range is marked and ingternal number range is switched off.
    Can you go to CO01 and create a production order for these materials directly w/o assigning order type on intial screen. check which order type is detrmined by system and check its number range in co86.
    please check.

  • IO231: Stock data of serial number &1 not suitable for movement

    Hi experts,
    I have unique problem with serialized material posting.We are having serialized managed materials which are posted to quality inspection stock.The user was able to post partial quantity to unrestricted after usage decision but when tried to post remainig quantity it is giving error 'IO231: Stock data of serial number &1 not suitable for movement".I checked serial number history in iq02 & it shows that same serial numbers were used for some order in the past which is already delivered.I am not able to understand how it allowed to post same serial numbers again for the same material and if it is normal why it is giving above error when we try to post remaining quantity?
    I tried by changing serial profile in the material master with all optional fields and without stock check and equipment and try to post but its not working.
    I want to somehow post material to unrestricted use from quality inspection with or without serial numbers.
    I am working on 4.7 system
    Can u guys help me.
    Thanks & Regards,
    Sachin.

    Hi,
        Please check this SAP Note: 213861, 1229108
    From Note 213861
    Release 4.0A or 4.0B:
    Table T156S
    Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
    All entries for movement types 645 and 647 should be filled with '****' in field T156S-VRGNG.
    Release 4.5A or 4.5B:
    Table T156S
    Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
    All entries for movement types 645, 647 and 675 to 678 should be filled with '****' in field T156S-VRGNG.
    Release 4.6A to 4.6C:
    Table T156SY
    Maintain the data using Transaction SM30 using view V_T156SY.If necessary, manually flag for transport in this transaction.
    All entries for posting string references 645 or 647 should be filled in field T156SY-VRGNG_S or T156SY-VRGNG_H with '****'.
    For Note 1229108
    A correction instructions has given Please take help from BASIS Team....
    This will solve the Problem...
    Regards
    GK.
    Edited by: Gnana Kumar on Nov 3, 2010 7:16 AM

  • Have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
    If you need help making this change let us know! Have a safe trip!
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Material Stock at storage location for particular date!

    Dear Friend,
    I need a table or bapi which gives stock for particular storage location on particular day. That is MMBE and if you go into detail list (shift+f7). I want same thing.
    I have tried in MARD table, but it gives stock of a material for most current date.
    Waiting for your early Reply.
    Regards,
    Bhavin Shah

    hi check:
    MB_ADD_PURCHASE_ORDER_QUANTITY
    Regards
    Ashok P

  • Firefox has been randomly crashing for two days. I always have google and facebook running. Firefox seems to crash at random times - no specific web page loading. My Firefox is up to date.

    Firefox has been randomly crashing for two days. I always have google and facebook running. Firefox seems to crash at random times - no specific web page loading. My Firefox is up to date.

    There can be multiple reasons for crashing. Seeing this article would be helpful as it lists out the solution for this-
    http://support.mozilla.com/en-US/kb/Firefox%20crashes?s=firefox+crash&as=s#os=win&browser=fx4

  • I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

    I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

    Jonas,
    I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
    You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
    Bruce
    Bruce Ammons
    Ammons Engineering
    Attachments:
    Cylinder_Plot_3D.vi ‏76 KB

  • How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

    How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for