Stocks not updating

Since upgrading to 3.0, the stock app will not update my prices. It just clocks. Is this related to 3.0 or is the market just having a bad day?

Same here, stocks and weather on my regular iPhone 3G. Last updated this morning. I thought I was going crazy because everything else works and I reset the phone. Hopefully yahoo is fixing it soon.

Similar Messages

Stock not updated after GR with 103 & 105 movement types

Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...

Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara...

Confirmation of production order - stock not updated

Dear all
On confirmation of production order,all dependent requirements as per bom (stock available at storage locations) should get updated ( as I set back flushing for all material stocks at material master level). But, when i do mb31, final product stock is updated, and bom stocks not getting updated.
what is the reason.please give solution

Hi GB,
Please analysise the following :
1.COGI what is exact error u are getting.
2.Did u check the following options
1. In the routing, the backflush indicator is set in the component assignment.
2. In the material master record, the backflush indicator has the characteristic "Always backflush".
3. In the material master record, the backflush indicator has the characteristic "Work center decides", the indicator being set in the work center.
Use
3.MB31 is for GR of stock means it post the stock at FG storage loactication ok.
4.If u need to update in BOM stock , u have to do it by MB1C/MB1A with movement type 262.
5.Check the stock in MMBE whether u have maintained ornot.
Please check all those anf come back.
Regards
Jia

Moving Average Price and Total Stock not updated for MTO scenario

We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
2)Moving average price does not updated after periodic settlement is carried out.
It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
p/s: on ECC5 system.

Hi,
Good morning and greetings,
The standard SAP says as below
The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Stock not updating after STO?

There are two plants 5000 and 7000.Plant 5000 transfer material to plant 7000 with STO process. But after STO process stok of plant 7000 is updating (addition) but stok of plant 5000 is not reducing..Both material document is showing right quantities .

Hi,
Check which MOVEMENT TYPE you are using when transference (issue) for that movement QTY UPDATE should be active
go to OMJJ and Put your movement type and then at left side option UPDATE CONTROL/WM movement type.
It could also happen if the Delivery against STO is not created as in such case , stock is not reduced from the Supplying Plant. Else check the Settings at Plant Level in T Code OMS2 if it's happening for every Material from any of these two Plants.
Sridhar.

Stock not updating after doing MIGO (gr) for third party sales

i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

Dear friend
Hope you are clear about third party process
In third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
In many of the scenarios that i have seen there is no MIGO itself done
To have MIGO is purely optional in third party
I am enclosing here with the threads which were discussed on the same
Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
MIGO- why we do it in third party sales?
Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
Why MIGO is required in thirdparty scenarion?
The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
The stock is not there? How can you see that ?
If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
If not happening means there is some customization error with the PO from MM side Check with MM colleague
Make sure if the item category is TAB then schedule line category is CB
In VOV6 for schedulle line category CB
NB is the order type
0 is the item category
E is the account assignment category
Regards
Raja

Stock not update

Hi MM consultants
I have create GRN but stock ins not showing in MMBE
a/c assignment category is A (Asset) in PO.
pls tell what is the problem behind this

Hii,
Whenever you use the Account assignment categoary "A" the asset will be consumed (Captalized) to the main asset so stock will not be updated.
You can see in AW01N T-Code Asset Explorer)
Regards,
Kumar

Reciept from PO - Why stock not updating

Hi experts,
I am making GR in a Plant (ISBW) but didnt mention the storage location so when i open the stock list it didnt show goods which i recieved. My question is where is my material or did any step i am missing between a goods reciept from PO and storeing it in the storage location.
My second question is that when i create a Goods reciept of an item 70 which is finished product it says Material 70 does not exist for ABC storage location. Message no. L9023. Where to fix this issue.
the third situation in relevent to the SD module that when we enter material 1 during SaleOrder creation is automatically change it to material 70. Y?
Thanks

Hi Usman,
For your first case, If u have the PO assigned to Cost centre, then upon GR then qty will be consumed upon recieving and will not go to the Storage location. So please check whether your PO is account assigned or not.
Reward if u find this useful.
regards
Anand.c

Weather & Stocks Not working

I have the update and everything. It worked fine on Saturday when I did it, but since then the Weather, Stocks, and sometimes the Maps will not work. It started out as the Stocks not updating and I couldn't ever get it to. Now the Weather app won't work either. I reset all the settings thinking maybe I changed something but that didn't work. When I did that of course it got rid of the city's I had in the weather, and I can't get them back. In fact I can't put any location in. Please help! Has anyone else had similar problems??

Thanks. I didn't know b/c I'm connected pretty much all the time @ my office so I haven't seen them working @ all.
Hopefully they'll get it fixed fast!

Stock is not updating in F&R

Hi All,
We had a problem in Production system that the Stock for one article is say 10 in R/3 but it is not updated in SAP F&R.
Possible reasons & initial investigation till now as follow:-
1.Stock checked in MARD table in R/3.
2.There is no FRE_UI error for that article & site.
3.All the stock load & process batch jobs completed sucessfully.
4.The MB51 report for Mat doc checked & found correct.
5.The RP profile changed as part of a relevant F&R RP profile & the article site is existing in FRE_DB_ART_SITE & also in /sap/matloc
Error in exception WB as
''For location product 0645/100392133 no stock is maintained in LIME''
So can anybody suggest how to solve this problem to populate the stock in F&R.
Thanks,
DD
Edited by: Dharmendra Kumar Das on Jan 16, 2012 5:36 PM

Hi Dharmendra,
itu2019s hard to provide a specific hint. From the standard functionality point of view I can recommend to use the F&R time series interface for stock booking only. That means in F&R table /FRE/BIF_TSD is a record required with movement type qualifier 4000. This record needs to be booked with report /FRE/BIF_INB01, indicator time series data has to activated. When the booking was successfull the record is automatically deleted. (Even if the stock is 0 the quantity will be transferred.)
In ERP Retail you can use FRE03 to transfer the stock. Enter the site and article, activate indicator stock information and activate indicator transfer data general --> Execute. Then check if a new record has been created in F&R in table /FRE/BIF_TSD with qualifier 4000.
In ERP Retail you define in customizing which stock types shall be F&R relevant, e. g. LABST and INSME, and you define the movement type qualifier which must be 4000 (since this is the default setting in F&R). Check the the stock type of the 10 eaches
Path: SAP IMG --> ... --> Forecasting and Replenishment --> Define Stock Types. (Customizing view V_FRE_TS_REL_ST)
Hope this helps.
Kind regards,
Rainer

Storage location is not updated after posting GR with Mvt type 107(Valuated GR blocked stock)

Hi experts,
Before posting GR through Movement type 107 (valuated GR blocked stock) we can see the storage location field in MIGO screen and able to enter value into this field. But after posting GR when we retrieve the material document we are finding that the field (storage location) is blank, i.e. it's not updated at all. When we check the stock in MMBE we find that no quantity is updated for valuated GR blocked stock.
We want the storage location to be updated while posting GR with 107 Mvt type.
Any idea Please?
Points assured.
Thanks
Amitava

SAP describes it in help.sap.com: Since the material is not to be added to the inventory yet, do not enter a storage location.
If you require a storage location, then I assume that your design does not match with the design of SAP, you are using a function to solve a gap which is not foreseen by SAP for this case.
Especially the 107 is usually representing stock which is still in transfer but you are already the legal owner and have to show the value of those goods in your books.

Last stock update Date Tab not updating in ICH

Hi Team
I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
Only this Last stock update tab Date are not updating.
What is the reason behind this?
Could you please help me to resolve this?
Regards
Virendra Kumar
09769396038

Hi Virendra
It is a bug, please report to SAP and get fix
which version you are using and what is the patch level?
1341691 should be helpful check out
Best Regards
Vinod

After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !

Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn

Stock information in serial number not updated

Dear All,
After doing GR Stock Information(ie, Stock type, plant, storage location) of some serial numbers not updated. Status of these serial numbers is ESTO. Stock of these serial numbers updated in warehouse. Still stock information not updated in serial number. Due to this not able to issue this stock in 601 movement. Also not able to reverse this serial number using 102 movement type in MIGO. Error while doing 102 movement type is Deficit of PU IR quantity XXXX NOS. Pls help
Thanks In advance
Zion

Dear All,
No need for reversal. Corrupted serial numbers have been repaired by program RISTEQ07.
Problem Solved
Rgds
Zion

Business area is not updating when allocating stock to sales order

Dear Experts,
When ever we allocating/dislocating stock in MB1B with 412E and 411E movement type,business area is not updating in the
accounting documents.but we assigned business area to plant in the customization.its happening to our Depot,for remaing plants its working.
Regards,
Varun

please suggest me right forum to post the issue.
Regards,
Varun

Stocks not updating

Similar Messages

Maybe you are looking for