Stocks Of Prod Ord material no showing !!!

HI Gurus ,
When i m confirming prod ord in CO11n , there 's no stock showing in MD04 screen for the ordered material...
Thanks in advance

Hi Kumar,
(ordered material is direct prod item)
Are you working with collective orders? If yes then please check the item would have been issued to the parent order.
Also go through the MB51 report for the material, it will give you the details.
Hope the above helps.
Regards,
Vivek

Similar Messages

  • Sale order - mtrl - prod ord ; table link

    hi,
    pl tell me a link through table and field -
    how to get a link between sale ord - item no. - mtrl - prodn ord no. - prodn posted qty.
    regards

    I have an understanding that you are in need of the tables for mat.no,prod.ord.and sales order to make a report to make them all appear in the report...
    If that is so,there is no need for tables..YOu can get that in standard SAP..
    Go to COOIS..enter the plant and execute.. In the resulting screen, go to chane layout. There u can add the sales order in the layout...material and production order will be there by default...
    Thus you can have the material,production order and the corresponding sales order in a single transaction...
    hope this clarifies...
    karthick

  • Capacity Evaluation: CM01 does not consider partially confirmed Prod Ord

    Dear Gurus,
    I was doing a test for CM01 and I found out that the Production Order with partial confirmation/delivery is still being considered as a full quantity in CM01 pegged requirements. For example is below:
    Prod Ord Qty is: 1500
    Partial Confirmation made: 500
    Now in CM01 it still shows 1500, I thought it should only be 1000. Reason is this order is backlog from last week thus I only want the system to consider the 1000 open quantity and not the whole 1500. Is it achievable in CM01?
    Thanks,
    Raymond

    Hi,
    but this Production Order is still open with 1000 PC. I will still need to process the 1000 remaining quantity out of 1500 and in CM01 I would like it to show on 1000 PC instead of 1500 PC.
    Another thing is for example, Im on the middle of the week, my available capacity is reduced and I also have already partially confirmed the production order. Then when I execute CM01, it will show capacity overload eventhough the open quantity is also decreased.
    So my concern is instead of Production Order Base Quantity, can the system check the production Order Open Quantity?
    Thanks,
    Raymond

  • Sales Ord assignment on Prod Ord component

    Experts,
    I have a situation, where in a previously created MTO Sales Order had its receipts deleted & now I want to create a manual production order with the Sales Order assignment (CO08). When I add a component & try to make it Sales Ord assigned, it works fine as long as the component's material master carries a 1 or a blank indicator on the MRP 4 Ind/Coll field. If its collective, system does not accept the SO entry on the Prodn Ord.
    However, when I try to create a Prod Ord (CO01), no matter what, the system does not allow me to enter a Sales Order on any component. Is it possible to influence this behavior some way?
    Thanks

    Andy,
    ??  What behavior do you seek? 
    CO01 creates a production order without reference to a sales order.  It would make no sense to assign components to a sales order, and this is not supported.This behavior cannot be altered in standard SAP.  Sales orders are irrelevant.
    CO08 creates a production order with reference to a sales order.  Components' assignment is dependent on the settings in the Material Master of the component.  This behavior cannot be altered in standard.SAP. 
    What behavior do your seek?
    Best regards,
    DB49

  • MB5B - Stock on posting date doesn't show Storage Location field

    Hi All,
    I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
    Storage Location field in result.
    How can I see it in this report?
    Thank you very much for your kind support!
    Cao Huy.

    hi
    what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
    now whenu give SL field then system will only concider stock from that SL
    the filed of SL will not be viewable in report as it is just opening and closing balance
    regards
    kunal

  • Get the Stock for a given Material no

    Hi,
         I'm an ABAP consultant, new to MM.
         I have a requirement - For a given Production Order I have to find the Material and respective BOM Explosion. Once that is done I have to get the Stock for those Materials [Child Materials].
    I have used AUFK and AFPO to get the material from the Production Order and Used MAST table to get the other details and passed it to FM - 'CS_BOM_EXPL_MAT_V2' - This gives me the Child materials.
    Now I want to know how can I find the Stock for a given Material. I want to get the Overall Unrestricted stock. Which Table do I have to use. Is there any standard Function Module [FM] or BAPI to get it.
    Please help.
    Thanks & Regards,
    Ashish

    I have gone through  the MARD table. I want to confirm - for a Material no there are more than 1 plant and for each plant there are more than storage location. So I have to add the Unrestricted Stock of all those to get the Full Unrestricted Stock.
    Please refer Transaction MMBE - I have to use that output.

  • Where can i find the Datewise stock for a particular material

    Hello friends,
    In which table i can find the stock of a particular material on particular date?.MARD, MCHB these all tables gives the current stock of material.But i want to find the stock of material on particular date.In Report MB5B and MC.9 we can find the stock on particular date but is there any table from where these reports fetch the data?
    Thanking you guys in advance.

    Dear Jitendra,
    Check once again in this thread whether are you able to find out some help.
    But I'm sure MB5B is not getting the info from a single table,it's getting the information from info
    structures and few tables.
    table to see stock on particular date
    Regards
    Mangalraj.S

  • Check the Stock of a particular material is available in SAP R/3 from Java

    Hi all,
    We have both SAPR/3 and Java Based Systems and going to integrate with XI.
    For Java user is it possible to check the Stock of a particular material is available in SAP R/3 system or not.
    For this requirement can we create any scenario and get the stock available info from SAPR3?
    If so then which type of adapters we have to use in this case.
    The Java user don't want to store any data here and there but just view the stock is available or not just from his end only.
    bye
    regards
    konala

    You can use synchronous Java Proxy-XI-RFC.
    Code the RFC to get the stock of R/3 material and route the response back to proxy.

  • No stock posting for this material

    I have create a material  with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the  material.

    Duplicated thread no stock posting for this material
    Please close this post.
    Regards.

  • Stock but non-valuated material with FOC flag in PO but system asking for..

    Dear all,
    We have create a new material type which is stock but non-valuated material masters which measn in the "Qty Updating" checkbox is checked, while the "value updating" checkbox is unchecked.
    Our process is when we create PO of this item, we will flag the "FOC" checkbox in the PO line item in ME21N.
    However, when I perform the above step, i hits the following error message:
    Account assignment mandatory for material 40000010 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    Procedure
    Please enter an account assignment category.
    Question, why system still want me to key in an account assignment category and with GL and cost center? this is suppose to be a Free of Charge item with the above setup and procedure?
    Please advise.
    Thanks.
    Tuffy

    Hello Kate,
    Our goal is the user does not need to key in any GL account and cost center as it is FREE. which is why we have a customized material type solely for material like this (see my previous writing).
    Does it means, I need to create an customized account assignment category with consumption posting using "V", and checked the Goods receipt checkbox, and checked the GR Non-Valuated checkbox ?
    thanks.

  • How to find Blocked Stock Value for a Material Division

    Hi Every Body,
    I have gone through the notes 589024,637927 to find out Blocked Stock value for a Particular Material at different plants . But I have to get Blocked Stock value at each Material Division . Kindly give some light on it to get it.
    The steps are same for finding the Consignment stock value and Transit Stock value. So kindly help me if any body has already worked on it.
    With rgds,
    Anil Kumar Sharma .P

    Hi Anil,
    well these notes work but they're prerequisites that have bothered me and unabled me to fulfill our requirement, for instance, having the material number in the drilldown and so on in order to perform the calculation during query execution.
    I believe there is not much more alternative if you still want to calculate valuations accurately at SLOC or any other stock indicator during query execution...
    I started from the basic fact that valuation of material underneath the plant/valuation area  (in my case 1 PLANT = 1 VALAREA).; precisely because all movements doens't carry all information as per the note explanation.
    So what we have done is to pull a cube with all Article/Sites MAP values; this can be done in several ways; MBEW/MBEWH are holding MAP values per fiscal periods; it has sufficient for us until now: our operations are asking to track MAP values more frequently.... So I am investigating how to work this out and have several alternatives:
    - MSEG has additional fields (available in the extract structures) like Total Stock Qty/Value PRIOR the posting. There is as well an indicator telling if the posting is relevant for the valuation (if it is going to affect the Qty/MAP or not). So it is possible to get the MAP after the posting for each material movement.
    - Create a change pointer on MBEW/MBEWH.
    - MKPF has two convenient fields (CPUDATE and CPUTIM) from which we could build our own delta extractor tracking MAP changes
    In BW the Idea  is to have a cube registering the Article/Plant valuation in time (non-cumulative) and then fulfill our queries via a multicube...
    hoping this will help you in solving your issue; I am of course following any topic in this matter so would appreciate your input....
    Olivier.

  • Calculating stock on hand per material at bin level from EWM

    Hi,
    I want to arrive at a report where i want to display the current stock(quantity) of a material at a particular bin.
    What are the EWM tables or Function modules or Methods that will give me that.
    EWM monitor (/scwm/r_wme_monitor) displays the same value, but i need to write a custom report.
    Thanks,
    Arka
    Edited by: arka roy chowdhury on Jul 8, 2011 12:32 PM

    No Solution

  • Stock transfer of Imported Material

    Dear Experts ,
    I wanted to do stock transfer of import material from one plant to another under the same company code.
    I want to transfer the cenvat credit on taken on CVD & other cess to the receiving plant .
    How should I go about it.
    Kindly guide .
    Thanks

    Hi,
    1) create PO for stock transfer.
    2) maintain material of stock transfer in j1id , with accessible value.
    3) create goods issue 351 mov type.
    4) go to J1is , refernce documnet will be goods issue number , type matd and customer id receiving plant
        after entering in to it put percentage for BED , SED , cess and also give accessible value.
    5) save j1is
    6) post excise invoice (j1iv with refernce of J1is doc), this number will automatically comes in goods issue document under excise invoice tab.
    7) take print of excise, will go with goods issue
    8)then in receiving plant do GRN , excise invoice will be post excise in goods issue plantdo, enter duties for creadit.
    do same process as of excise creadit.

  • How to post return stock to unrestricted stock for only Plant & Material Type combination?

    Hello Everyone,
    At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
    Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
    So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
    Regards
    Anwar

    Dear Mohammed ,
    as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
    as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
    follow the below logic to achieve your issue .
    you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
    wait for other experts solution , if any standard is possible or not  .
    Regards,
    C.B Reddy.

  • Any function module to get Stock and value of material on a given date?

    Hi Friends
    Is there any function module available to get Stock/and  value of material on a given date?
    Thanks
    Harish

    Sorry I didn't elaborate the requirement.
    I am asked to develop a custom report for inventory management. For range of materials it is required to display stock and value on particular date and GRs GIs for the range.
    I need function module to use in Zreport.
    Thanks
    Harish

Maybe you are looking for