Stolen 4s returned but can't get it working after reset

My fone was solen in November and returned by the police yesterday. The thief had changed all setting and named the fone as his. I had it on FIND MY FONE but no luck but yesterday it deleted it. The screen is black with the circle icon going round . When I turn it off and back on it shows Apple badge for a bit then home screen , slide to unlock then back to the circle going round and round . It also said sim is locked and i cant unlocknit quick enough before black sreen again.Please help

You need to force the phone into recovery mode & restore it, as described here:
http://support.apple.com/kb/ht1212
You can't just connect to iTunes as Eric's post tells you, that won't work.

Similar Messages

Can't get router working after switching from DSL to Cable broadband???

I have a WRT54G v.5
I just switched from dsl service to cable broadband. I can't get my router to work. I hooked it back up just as the dsl modem used to be. there is an ethernet cable that goes from the cable modem to the router. then an eithernet cable that goes from the router to the computer. this does not work. If I just take the router out of the loop and run an eithernet cable straight from the cable modem to the computer it works fine. so the cable internet service is working fine up to the modem. The router is the problem. I have restarted both the computer and the router. so that rules that out. can you help me?

Open the setup page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin and click on ok.On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button.Now click on the sub tab ""MAC address clone"".- Click on enable.Click Clone & click save settings
Check WAN Ip on Status page of router .... If getting Valid Ip .... try going online...If not ... power cycle for 4-5 minutes & then, try going online.

I have the Z4 app for deaf, but can't get to work connecting! help please

The Z4 app makes use of front facing camera, but dosen't connect to my friend on macbook. Any Ideas why not?

danno01 wrote:
The Z4 app makes use of front facing camera, but dosen't connect to my friend on macbook. Any Ideas why not?
I have not tried that app. But have you gotten Face Time to work with another iPh4? It may be that you need to go to Settings > Phone and enable Face Time (set it to ON).
Phil

IVE PAY FOR MY PACKAGE BUT CAN NOT GET IT WORK

IT KEEPS TELLING ME TO UPDATE

Hi Valentine,
Did you subscribe to one of the Acrobat online services? If so, have you tried signing in with your Adobe ID and password? That message can often mean that you just haven't signed in yet. (It can also mean that your subscription hasn't processed yet, so you may want to log in to www.adobe.com and look under My Subscriptions and Services. Make sure that the subscription you purchased is "Active."
Please let us know how it goes.
Best,
Sara

Can t get to work tint2 launcher

I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Australia Post Shipping - Can't get to work

Hi,
I have read all the online support docs I can find and I just can't get Australia Post Shipping to work on our site for international orders.
Everywhere it says:
Choose your shipping provider
Enter your account details
Your customers see real time shipping costs!
But Australia Post selection doesn't let us enter account details - does anyone know where I enter them?
(see image at bottom)
And after I allocated sizing, weights etc to every product it doesn't even look like it even works:
(see how there are no options to select)
Does anyone have any ideas on how to get it to actually work? I can't imagine BC would role something like this out if it didn't even work but from all my googling I can't see that anyone actually uses it (or at least comments on using it!)
Would love any help

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Can't get wifi working on X201 after installing Win 7 64 bit

I've just purchased an X201 type 3294 with a 320gb HDD running Windows 7 64bit. Wifi works fine when running from the original HDD. I've pulled the HDD and replaced it with an SSD and installed windows 7 64 bit so I can use the 4gb RAM which came with the computer. I did a fresh install then started trying to install drivers. I started with Wifi first so I could download the rest of the drivers directly to the computer. I can't get wifi working after installing Windows 7 64bitfor some reason. I have the original HDD in an external enclosure so I can still access it.
I can't figure out what drivers I need, or even what adapter I have on the computer.Lenovo's part look up tells me the adapter is part number 60Y3231, but that information seems to be useless. I've tried most of the drivers on Lenovo's driver page. I've tried just copying the C:/Drivers folder from the original HDD, and just about anything else I can thinkof.
Anyone know how I can get the right driver, or if this is even a driver problem? For what it's worth I'm not afraid of having to learn some terminal if I have to but I'm totally unfamiliar with Win 7. I have much more experience with XP, Vista and OSX/some Ubuntu.
Solved!
Go to Solution.

Hello and welcome,
If you have a wired connection you could try installing ThinkVantage System Update. Run it and it should find all the appropriate drivers and install them for you.
That FRU seems to be an Intel Centrino Advanced-N 6200. It's hard to tell from the drivers page which one to use. Most of the README files include 6200. My best guess: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1w218ww_s64.exe
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

27" iMac was stolen, now returned but has been locked what do I do?

My 27' iMac was stolen, now returned but has been locked what do I do? It was purchased in December of 2011, they nust have set up icloud account to lock it. How do I get around this? Apple should have my serial number of this computer matching my account somewhere right?

What do you mean by 'locked'. Is it the admin password that you don't know or did they set a firmware password?

HT1918 I'm having trouble viewing my account in iTunes, I'm signed in but can't get passed the next login window - any ideas?

I'm having trouble viewing my account in iTunes, I'm signed in but can't get passed the next login window - any ideas?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
Thanks Bazzer50

Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?, I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?

I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?, I can listen to audiobook on my mac through itunes but can't get it to download onto my iphone. Any ideas?

I have this question also. They were there and now they are not. Until this is fixed I will not purchase another audiobook.

HT1848 I just downloaded music on my computer but can't get it to synch with my ipad.

I just download music to my computer, but can't get it to synch with my ipad. Does anyone have a suggestion?

iOS: Syncing with iTunes - Support - Apple

Stolen 4s returned but can't get it working after reset

Similar Messages

Maybe you are looking for