Stong Magenta Cast on Nikon D1x Compressed Raw files

I had to get some shots that I took in 2003 with my D1x. I'm on a MAC with Lightroom 1.3. I imported the photo's into Lightroom. I noticed something strange.
Some of the the images first displayed correctly in the grid view. bus as lightroom created the higher res thumbnails, the images developed a very strong magenta cast. Reminded me of slide film when the color developer was going bad. But some of the other images were fine, I had about 2000 from the shoot.
It took a while, but I did discover the differences between the files that displayed correctly and those that didn't. The difference was that the ones displayed incorrectly were Compressed RAW. I was beginning to run short of storage on the shoot and changed to the compressed option for about the last 200 or so shots.
If I ask Lightroom to open them in Photoshop CS3, they open as PSD with the same strong cast. Not good at all.
I then used Bridge to look at the files, they also show up with the sme strong magenta cast in bridge. But, when I open them in Camera Raw, they display fine and when I send them to Photoshop, they open correctly.
So I can use the files, but I'm wondering. Has anyone else noticed this? Is Adobe aware of this?
I looked for an article in the Knowledge Base and looked through the forum messages. I didn;t find anything except for an item in the forum about D100 files displaying the same as mine.

i just started having the same problem except that my magenta cast happens when i open an image through raw then ps and save from ps to a file. If i save from bridge or adobe raw there is no problem. I only get the cast when saved from ps and to jpeg and if viewed through bridge. have no idea what to do.

Similar Messages

IPhoto compatibility with Nikon Compressed RAW files?

Hi,
Has anyone tried using iPhoto with the compressed RAW files generated by a Nikon D300s? Are they supported?
The 300s can create types of RAW files: 12- vs 14-bit and uncompressed vs lossless compressed. Which of these 4 types is/are supported by iPhoto?
Thanks,
Mike

Hi,
I looked into it a bit further, and apparently Apple does not support ANY TYPE of RAW file from the D300s! This is the camera that Nikon (who is not exactly a minor player in the digital camera market) describes as their "flagship" DSLR!
(Even more frustratingly, the D300s has the same sensor and image processor as the currently-supported D300, so the RAW file formats should be very similar and Apple shouldn't have to do too much work to add D300s support!)
On the other hand, Photoshop already supports it:
http://www.adobe.com/products/photoshop/cameraraw.html
EDIT: yes I know I should "submit feedback"... already done...
-Mike
Message was edited by: Mike G.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop. Is there a fix? Surely Adobe make a mistake and not keep up with Nikon.

I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
Would post in ACR forum and see if they know anything more. http://forums.adobe.com/community/cameraraw

Nikon 1 S1 RAW Files and Elements 9

My current Elements 9 does not support my Nikon 1 S1 RAW files - will I need a new Elements or is there a RAW update that will support this new camera?

That needs Camera RAW 7.4, for which you require PSE11 or PSE12. Otherwise you need to download the Adobe DNG Converter (Google it) and convert the files to DNG files - which your PSE9 will be able to read.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

RC 8.6 Issues with Nikon D810 NEF RAW files

RC 8.6 does not correctly process Nikon D810 NEF RAW files. See the following blog article for some details:
Nikon D810 vs D800E ISO Comparison

This is very helpful. My current workflow, until ACR 8.6 and LR fully support the Nikon D810, are to use the DNG converter and import the resulting D810 DNG files into my LR catalog.
I have not yet tried this (traveling right now), but I assume I can still make a custom profile using the X-Rite ColorChecker Passport and it's associated software for my D810 using the RC 8.6 DNG files. This is my normal workflow for all of my other cameras in LR, but the process is direct from native RAW and not DNG (to produce the custom profile).
Sent from my iPad
On Jul 28, 2014, at 6:51 PM, "max.wendt" <[email protected]> wrote:
RC 8.6 Issues with Nikon D810 NEF RAW files
created by max.wendt in Adobe Camera Raw - View the full discussion
Until Lightroom gets D810 support, you will need to use the ACR plugin in order to see the profiles. The DNG Converter always uses Adobe Standard, and embeds it into the DNG. Lightroom 5.5 doesn't have the D810 profiles.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image athttps://forums.adobe.com/message/6592335#6592335
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [https://forums.adobe.com/message/6592335#6592335]
To unsubscribe from this thread, please visit the message page at [https://forums.adobe.com/message/6592335#6592335]. In the Actions box on the right, click theStop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/thread/416458?tstart=0.

Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

Why does photoshop 12 editor open my Nikon D90 Camera RAW files only as jpegs???

Hi,
Which operating system are you running on?
What makes you think that the raw files are being opened as JPGs?
Do you shoot RAW+JPG and opening the JPG files bt mistake?
If you are opening a RAW (NEF) file and it doesn't show the Camera Raw screen but goes straight into the editor then it may be that your screen resolution is too low.
What is your screen resolution?
Brian

CS5 Bridge does not recognise Nikon D 800 Raw Files

I have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUT
Bridge does not. I have tried updates but my Apple Mac Pro does not recognise them

That would mean that you have the ACR plug-in version 6.7 or 7.1 in the wrong place.
You can only have one version of ACR anywhere in your installation. If you have two, it won't work. Look for the version(s) you have installed in Photoshop under the Photoshop menu > About Plug-In:
Your camera has been supported ever since ACR 6.7 and CS5 can run ACR 7.1 (but not any higher version of ACR).
The only correct path for the plug-in in CS5 is as follows:
Very wide image: click on thumbnail for larger view.
NOTE that the path starts with the ROOT LEVEL Library, the one right after the name of your boot drive, not your user or Home Library.
The screen shot is from an installation under Snow Leopard, where I had CS5.

Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?

Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?
I even downloaded the latest Adobe DNG converter and converted all the NEF files to DNG then tried to import to lightroom - it didn't even recognise them??? What the...

Keith_Reeder wrote:
It's not a "wrong" error message - it's true, as far as it goes, and it's completely unrealistic to expect error messages to be fully diagnostic - they're a starting point.
Not wrong?
Let us have a look at the error message:
"The following files were not imported because they could not be read"
This clearly gives the user the impression that there is a reading error where you want to copy the files from. Is that the actual error?
No, the actual error is that the file could not be written at the destination.
It is possible that it is not factually wrong because Lightroom first make a failed copying attempt without giving an error message, then still assumes that the files have been copied and tries to import them, and THEN makes a failed import attempt from the destination and gives the error message. But that would never be anyone's first guess when they experience that error message.
A much better error message would be: "The following files were not imported because they could not be copied to the destination folder."

HT3946 How do you get Nikon D600 camera raw files to download INTO Apeture 3

How do you get Nikon D600 camera raw files to download INTO Apeture 3 ?

The D600 is a new camera. There should be an update in the near future to accommodate it.
This was the last one:

Nikon D600 NEF/RAW files/DNG 8.4 still cannot read

Hi all, I just tried installing several versions of the DNG plug in for CS6 and it still cannot read the Nikon D600 NEF/RAW files on a 2014 MacBook Pro. Any suggestions? I have searched previous questions, but cannot find one on this very topic. Cheers, Paul.

What version of Photoshop do you have installed. If you have CS6 make sure you use CS6 menu Help>Updates. To make sure you have the latest updates. If you have CS6 preternatural you should see version 13.0.6 when you use menu Help>About Photoshop if you hace a Creative cloud subscription you should see version 13.1.2 using menu Help>About Photoshop.
If ACR 8.6 is installed correctly it installs in a common place that is used by both Bridge CS6 and Photoshop CS6.
When you open a RAW file in Phoroshop or in ACR from the Bridge the ACR dialog should open and in its title bar you should see version 8.6. You should not need to create DNG RAW file for your NEF RAW files just to used ACR. You only need to do that if your using an older Photoshop version and an older ACR. version that does not support your Nikon Camera NEF RAW format.
If you have CS6 and the ACR title bar does not show 8.6 you do not have all the CS6 updates installed. If menu Help>Updates doe not install ACR 8.6 try downloading it manually from the CC updates site and see if the manual update works All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
or Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
Version 8.6
Name
Size
Date
Adobe DNG Converter 8.6
210.7MB
7/30/2014

Nikon D40x NEF raw files, Support for

Need Support for Nikon D40x NEF raw files
Also needed in CS2, CS3

See
Here!
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Why CS6 cann't open Nikon D800E NEF raw file?

Why CS6 cann't open Nikon D800E NEF raw file?

The Nikon D800 was supported from ACR version 6.7 / 7.1. But CS6 shipped with 7.0, so if you've never updated ACR (or reinstalled from disc), they won't open.
Other than that - have you used an older version of Nikon Transfer or View NX? These will corrupt the NEF header so that ACR can't read them.
There's a fix here: http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

NIkon 1 V1 RAW files

Does CS6 support new NIkon 1 V1 RAW files?

Hello! welcome to the beta!
It is supported since Camera Raw 6.6: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html so it should be the case on ACR7.

Problem with camera nikon d700 .nef RAW File. Can't transfer and use it on my mac maverick os.

Hi There can anyone help. Before this on my imac, i can use and edit my nikon d700 .nef(RAW) file format.Now after i upgade to maverick os i can't use to edit or transfer the RAW files. Any Solution. Please help me. Imust delay all my work.

Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

Magenta color cast problem on canon 7d raw files

when i import canon raw files (cr2) into lightroom 3, i get a magenta color cast over the whole image. the thumbnail image looks fine, but when lightroom opens up the image, it get's a magenta color cast over the whole thing. i shot raw+jpeg mode too, and there's a huge differnce in color between the two. the jpeg looks like how i shot it in camera but the raw image has the ugly magenta color. not only do i get this ugly color, but it seems like there's added noise compared to jpeg image.
i tried converting the cr2 into a dng. but when i open that in lightroom, i get the same problem.
i use aperture 2.1 (i only use the lr3 trial so far), but i have the same problem there.
i use cs3 but i downloaded cs5 trial.
acr i have is 6.1
help.
thanks.

Go to develop and the callibration tab and change it in the pull down menu to a canon default like 'Neutral' and not the adobe one which is made by somebody totally colour blind or obviously a Nikon fan.
Although this is weird as the problem for me has always been canon JPG's with the cast and not the RAW.
Also check your white balance cause Lightroom seems to change it whatever.. 'AS SHOT' is a big fat Adobe lie so use a preset from your camera in the drop down box.. Why? I shoot with Canon's flash WB setting which i know to be 5500k with the tint at zero. On import, Lightroom changes it to 6150 and adds an amazing +7 on the magenta tint, if i chose 'FLASH' things suddenly turn to what i see on the camera LCD.. I'm sure that is where the big fat tint has come from since day one.

Stong Magenta Cast on Nikon D1x Compressed Raw files

Similar Messages

Maybe you are looking for