STOP 0x0000007F Error - 6 systems

I emailed MSI Tech. Support just incase, but figured this might be a little quicker. Heres what I sent them:
I have six systems that we have built for a customer that are all having the same problems. Random restarts/shutdowns. Tried many different sticks of RAM (Micron, Infineon, Samsung (Kingston and Crucial) - 256M and 512M), three different PSU's.
The error I'm receiving is a STOP 0x0000007F (Single-bit error in the ESP register) error, and based off of Microsofts KB they suggest a microcode update but I have the latest BIOS on all six systems.
Any help is greatly appreciated!
Tristan
Here, also, are the specs I sent:
MSI 865PE Neo2 FIS2R BIOS v2.1
Intel P4 3.2GHz
Kingston HyperX PC-3700 512M x 2 (Currently)
Antec 450W PSU (Used Antec, RAIDMAX, and AGI, 350w to 500w)
MSI GeforceFX 5200
WinXP Pro SP1a
HyperThreading Enabled
Any help is greatly appreciated, as I have six of these systems doing the exact same thing. I'm pretty sure its a M/B issue, or MB related software problem/incompatibility, because I used the same setup with an ASUS P4P800 SE and had no problems. On that note, I even used the MSI 865PE Neo2 w/o the built-in 1394 and had no problems .. any relation??
If you need any other specs just ask, more then happy to share...
Thanks in advance, guys...
Tristan

Hi, I'm sorry you and your clients are having a bad time with this, but the causes of STOP 0x0000007F (Single-bit error in the ESP register) error are as follows:
When you receive a STOP 0x0000007F (0x00000008, 0x00000000, 0x00000000, 0x00000000) UNEXPECTED_KERNEL_MODE_TRAP Blue Screen Of Death (BSOD), the first parameter, 0x00000008, indicates a double-fault exception due to a single-bit error in the upper half of a processor's ESP register.
In other words!
This condition can occur if a processor:
Requires a microcode update that is not applied by the computer's BIOS.
Is damaged, defective, or broken.
Is running outside the environmental specs for power, temperature, humidity, dust, etc..
To troubleshoot this issue, see the following Microsoft Knowledge Base article:
http://support.microsoft.com/?kbid=842465
Good luck and hope this helps you!

Similar Messages

Windows 8 system doesn't get internet, says system event log on service has some problem of STOP 0xC000021A error which system restarts very slowly

Hi, my system runs on windows 8 on hp laptop envy series. All of a sudden, system event log on service stopped, errors which prevented the system to log on services. It displayed error of STOP 0xC000021A when i use system restore to roll back to previous
configuration. Also when I tried to refresh my pc, it says i can't do changes as log in was switched to prevent the changes by notification.I don't know what to do next, I tried to put recovery dvds which I made when system was bought, now not at all working.
Internet is not active, not able to resolve by trouble shooting and system taking lot of time to get dsktop. Previously I used to get my desktop in 10 seconds. Now its 10 min. May be I m infected with virus. My files, they are there. I tried to transfer some
files by pendrive to another system, now the new system(where i put my files in another system) crashed, windows 7 system which does not display desktop, icons etc and not at all workable.
Also in my hp system, i m unable to open control panel. if its opened, it will not go off, when i use task manager, it says explorer and shuts down. I had to force restart the system. Please resolve something to get my hp laptop workable. I m waiting for
my MS thesis to be working on that. My files are locked and no way to transfer, I fear of infected by virus to another computer also.
Pls give instructions to hw to set my hp laptop at the earliest without losing any of the files. Idon't want to reinstall and lose all the data for timebeing. Else, inform me the option for copying data safely. I tried to change the adv startup and recovery
by changing the boot sequence by DVD but this also shows error 0xC000021A and asks us to see the details. I didn't understand all this. Pls help asap.
Thanks
venkata
STOP 0xC000021A

MV
If you can boot either from the win 8 dvd or in safe mode we need the DMP files
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Cloud service created works fine in local Azure Emulator. But doesnot work when deployed to actual azure and says Restarting (Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileNotFoundException)

Hi,
I have a created a cloud service and when i run locally in azure emulator it works fine. But when I am trying to deploy that to azure it says: Restarting (Role has encountered an error and has stopped.
Unhandled Exception: System.IO.FileNotFoundException)
Can anyone please help me on this.
Thanks,
Satya Chenna

Any specific reason you are having timer on role start up? are you using thread.sleep for longer duration in the method?
If you are using azure diagnostics - make sure these things
1. Azure storage connection string is set to correct storage account and not to the development storage.
2. Check session state provider - local is not supported on azure.
Also you can refer this for more information
http://blogs.msdn.com/b/kwill/archive/2013/09/06/troubleshooting-scenario-3-role-stuck-in-busy.aspx
Bhushan | Blog |
LinkedIn | Twitter

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

Still troubleshooting 0x0000007F errors on PT880 Neo-LSR

So frustrating...just cannot seem to end the 2-3 times a week blue-screen shutdown my computer insists on. Posted something a few months back on this, and consensus seemed to be that my 380w Antec Power supply was too small for my system, so I upgraded it to the TruePower550, really hoping this would end the problem. It did not.
Seemingly corresponding with the errors I'm getting (it seems), is a disk error in the event properties that says:
The driver detected a controller error on \Device\Harddisk4\D. Sometimes it calls this "Harddisk3" or "Harddisk2" for some reason, but it's always D. My D: drive is a 160GB IDE that is pretty new and it's hard to imagine it's really failing. Maybe, but I doubt it. I replaced the IDE cable to this drive to no avail. I don't know if the fact that my C: drive is SATA is contributing to this, though.
The blue screen error actually reads:
0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Microsoft says this is either bad RAM or a bad mobo. Both are just a few months old. I have a lot of pretty new (expensive) equipment going here.
It seems if I want to have my Geil memory tested, I have to pay $49 at the computer store near me. Which seems outrageous. I could almost buy a brand new PT880 Neo-LSR for that. Which won't help if the mobo is not the problem, but still. The BIOS I'm running is 1.7.
Obviously I'm going to have to keep spending money on new equipment troubleshooting this. It never ends!! The question is, where to spend it? On the RAM test? On a new slave drive I might not need? Should I just buy a new mobo?
Any suggestions would certainly be appreciated.

Well, I pulled the drive that was throwing the errors and sure enough, still getting the same errors/restarts saying the drive D (which is no longer in the machine at all) is at fault. Ridiculous.
This has to be the board. I'm convinced.
Time to buy (another) new motherboard. This one must be like 4 months old or so. Sheesh.
Quote
Originally posted by johnnyalex
Hi there, my first MSI mainboard was bad, i kept getting stop errors just like yourself, i was at my wits end ! eventualy when i swapped the mainboard over everything was ok..... it may not be your board just wanted to give you some moral support!
Can you remove the slave drive for now and see if that helps with stopping the errors, if not then perhaps RMA your Board as a mainboard fault will throw all kinds of errors at you.
I spent 7 months trouble shooting before i found out it was the board ... Iwould not wish that stress on anyone else. Any way good luck and let us know if you fix it.

How can I fix a "Plugin Container for Firefox has stopped working" error?

Windows 7, Firefox 30
After changing how Firefox handled cookies (changed to forbidding 3rd party cookies, asking permission to set cookies), I rebooted my system, and Firefox would not start - I got the error message in the question. I uninstalled Firefox, and then re-installed, and Firefox ran fine. After some hours, I closed Firefox and rebooted the system, and again, Firefox hangs upon start, and I get the Plugin Container has stopped working error message.
Since Firefox won't work on my Windows desktop, I'm using my Linux desktop to look here for help. The problem details reported are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 30.0.0.5269
Application Timestamp: 53914233
Fault Module Name: mozalloc.dll
Fault Module Version: 30.0.0.5269
Fault Module Timestamp: 53911393
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Thanks in advance!

plugin-container.exe is crashing repeatedly. The error code is 0x80000003, the faulting module is mozalloc.dll, version 33.0.0.5397, fault address 0x00001425. Hardware acceleration is disabled, and I have disabled all plugins in an attempt to cure the problem (only Acrobat and Flash were enabled, and Flash is up to date).
(Edit) I'm running EMET 4.1 - if this is memory-related might that be significant?
Here are some crashes from the past few hours (many more if you want them)
bp-9f25a45e-4830-4dd9-a54a-c923f2141020 20/10/2014 22:53
a5c758e1-b489-4c72-98f0-954b2790050b 20/10/2014 22:08
b950661f-25d4-4052-872f-6fb7f3dcc03d 20/10/2014 22:02
b4bad77d-bfab-4913-a4ae-6186ead4cdbc 20/10/2014 22:02
2e970550-11e7-4ed0-8ad6-58025495263e 20/10/2014 22:02
fe4c4f7e-5d0e-4acd-ade7-73d2bd505e04 20/10/2014 22:02
4f83309d-1792-4cef-8f0d-b0465e0c4c39 20/10/2014 22:02
57f40624-b424-4181-ab93-0f37fa4188f6 20/10/2014 22:01
3694a431-a1ac-4077-8019-7e59a1595495 20/10/2014 22:01
cdeafebe-5444-4041-8517-e077c414d2df 20/10/2014 21:52
18ae849e-2c17-4ee0-91bc-57bf4895e697 20/10/2014 21:52
eec36b4b-9f8e-4a73-9e27-d71b21c5011c 20/10/2014 21:19
d98ba06e-eb89-41f7-86ee-517f410a342f 20/10/2014 21:17
1ffb43bf-6750-4629-a2aa-2f0ad39da9ea 20/10/2014 21:09
cc0ab618-e918-4fd7-ba52-bf01aadc5a3e 20/10/2014 21:09
8829fe23-9fd0-4826-89cf-a3e9fd860c56 20/10/2014 21:08
e2d6dc1a-41a0-48cb-b7b0-81d4ef787bbd 20/10/2014 11:51
a266ba42-fc1c-4204-9f1b-289f2b99c451 20/10/2014 11:51
a586d4c0-2102-4c80-a73f-b977000b46dd 20/10/2014 11:51
a64d9089-3f91-4504-bcad-122bfd0a01e9 20/10/2014 11:50
caedc737-d9dd-4bfb-83fd-400ac5a6af6a 20/10/2014 11:50
1a56651a-d096-45a5-9afa-e6c0c822d892 20/10/2014 11:38
71f07b05-8310-4f1d-b5e9-70a514e8a43e 20/10/2014 11:38
2de8971d-d1cf-4077-bac0-be405dd76ff5 20/10/2014 11:38
9ffe41cc-844b-4b93-b172-28154eabfc0c 20/10/2014 11:38
bf95a7d3-0e08-485d-84e9-3638a749244b 20/10/2014 11:38
061112b6-e919-4e87-a815-6c137a48d375 20/10/2014 11:38
1d8ebe85-a5a3-4120-920a-0556be7524c8 20/10/2014 11:38
b0fcb220-1515-4c94-8d35-c65c4cb7743c 20/10/2014 11:38
07430c7b-2424-4f90-8a0d-fb90d3c829f3 20/10/2014 11:38
99b8b695-995f-4bce-a879-8bd0e89cd296 20/10/2014 11:26
d01187a9-bb0a-4bc8-b6fe-9669b5a2d858 20/10/2014 11:26
9b650499-6ac1-42c8-9a92-f762d61deafd 20/10/2014 11:26
ec6044dd-8940-4f6e-8e97-94c23213a973 20/10/2014 11:26
a08bb60e-f686-4417-b5ce-3e736c9ed625 20/10/2014 01:15
4eb90c2b-f9ed-4952-b8e9-71fffe7ecf64 20/10/2014 01:14
03642f9d-09ea-46ea-b66d-62dee98a20fe 20/10/2014 01:14
4cd20689-ad73-4371-88c6-d80f4ed95313 20/10/2014 01:13
c72ee7ad-389a-4a14-a5cf-539765e707c4 19/10/2014 21:08
8593221b-8024-45c0-a07b-85dcf5bc9035 19/10/2014 21:07
32a5c4d7-dad9-4fc2-b31e-716881e4cefe 19/10/2014 21:07
d46d8d27-f26e-488c-ab89-5f029d139246 19/10/2014 21:07
da22093e-970d-4724-b074-2ae494745e0b 19/10/2014 20:46
3ca99f2a-0138-4403-81fa-e4245ff9a7db 19/10/2014 20:45
c7252857-d6bb-4c0d-95e5-83f1fd9bf175 19/10/2014 20:45
87c7b0a9-a2b5-4c98-9953-cf684c15f3d5 19/10/2014 20:44
c60f13f8-18b5-42b6-9b02-810cb5a77347 19/10/2014 20:44
188ba801-1616-4048-a941-b60126788efe 19/10/2014 20:44
1c3d4f1e-c3be-469a-a348-5e93d1443bae 19/10/2014 20:44
852bf33f-d3b2-40d3-820e-aea7e1c367da 19/10/2014 20:20
d5cda65a-4fa7-4f9e-b5a0-bacfb1bfcebd 19/10/2014 20:20
d6b7137a-d347-4a39-91a6-e0e5f817b71b 19/10/2014 20:20
a031b2f8-cbb0-4fd5-abf1-a557a4021ce7 19/10/2014 20:20
58cf92b6-f4d7-4ab8-98ea-89cc311338df 19/10/2014 20:20
The crashes are intrusive but Firefox itself is not usually affected - so isolating the plugins works as intended.
(I tried creating a separate thread for this but the process stalled at Stage 3)

How do I stop MobileMe error message without a Preference Panel?

This MacBook running 10.6.8 has no MobileMe preference panel and no "ByHost" folder, so I can't follow the instructions found elsewhere here to stop the error message "You entered an invalid MobileMe member name or password. Verify your MobileMe member name and password in MobileMe System Preferences."
The error message keeps popping up and I can't figure out what program is producing it. I have removed the MobileMe account from iMail. I've checked iCal and Address Book, and they don't have MobileMe syncing turned on.

Removing the MobileMe account from Mail (not iMail) won't remove the account's setting for Outgoing Mail Server (SMTP). Look at the list in your remaining Mail accounts and delete the one for MobileMe. Otherwise, everytime you open Mail, that server connection will attempt to connect.

Sapinst stops with error while installing ess component for Java AS

Dear experts,
I really hope you can help me with this one,
We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
but then stopped with error while deploying components for the Java AS:
ERROR 2009-03-30 13:01:27
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
ERROR 2009-03-30 13:01:28
FCO-00011 The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
Thanks a lot for your help in advance.
Here is the crucial part of callSdmViaSapinst.log:
Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
*Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Mar 30, 2009 1:00:21 PM Info: Begin of log messages of the target system:
*09/03/30 12:55:19 - ************************************************************
09/03/30 12:58:07 - Start updating EAR file...
09/03/30 12:58:07 - start-up mode is lazy
09/03/30 12:58:08 - EAR file updated successfully for 578ms.
09/03/30 12:58:08 - Start deploying ...
09/03/30 12:58:42 - EAR file uploaded to server for 30641ms.
09/03/30 13:00:20 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                     Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
               The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

Thanks Désirée for your answer and apologies for the late update on this one.
This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
regards,
Manfred

Error while System copy in Sapinist

Hi All,
i found an error while system copy ABAP + Java in SAPinist
Error is
CJS-00030 Assertion failed: in function (nothrow)
{    NW.trace("NW.hasABAP(", nothrow, ")");    if (_hasABAP == undefined && !nothrow)
{        ASSERT(arguments.callee, false, "NW(" + this.getSID() + ").hasABAP() is undefined");    }
NW.trace("NW.hasABAP() done: ", _hasABAP);    return _hasABAP;}NW(SAPID).hasABAP() is undefined
ERROR 2010-09-24 10:52:45
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2010-09-24 10:52:45
FCO-00011 The step setLoadType with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|2|0|
NW_getDBInfo|ind|ind|ind|ind|4|0|
NW_getLoadType|ind|ind|ind|ind|0|0|setLoadType was executed with status ERROR .
any body have solution
gagandeep

Hi,
Please make sure the hostname is not beginning with digit?
We found similar problem reported by other customers that the error occurs if hostname begginning with digit.
For details, please refer to note 611361.
If it is difficult for you to change hostname, please stop sapinst and modify the control.xml in your
installation directory:
search for the string pfdir.getChildNodes and repleace the
line
for (var it =
pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-z][a-zA-Z0-9-]*$/);
!it.isDone(); it.next()) {
with the line:
for (var it = pfdir.getChildNodes(/^START_[A-Z0-9]+_[a-zA-Z0-9-]*$/);
!it.isDone(); it.next()) {
It is not sufficient to just restart SAPinst in order to fix the problem.
You have to restart the installation from scratch with the modified control.xml.
You can restart the installer from DVD, choose the installation service
on the first screen, and when the next screen appears, interrupt the
installer. Then patch the control.xml in the installation directory and
restart the installer.
Best Regards
Julia

Adobe Premiere CC"has stopped working error"

Ran an update on Adobe Premiere CC last night. Now this error occurs. I did a system restore to 1 hour before the update. Adobe worked fine this morning. After I closed the program and logged in tonight the "has stopped working error" displays. Also Adobe will not import and .MOV files and the .MOV files that are already on the timeline are no longer there. Any help would be appreciated thanks.

I have just had the same thing happen to me too. Everything has been working fine but today, Premiere has crashed/stopped working twice. I have managed to get back into it now, but it won't playback either the Source or Program Monitors, saying there is a 'Low-level exception in Adobe Player (Player)'.

Adobe Premiere Pro CC 2014.2 has stopped working error

Hello guys,
I have recently built a new computer with the following specs:
CPU: 4790k (stock speed)
Ram: Team Extreem 16 GB (2x8) (at 2400mhz)
Motherboard: Asus Ranger 7
GPU: Zotac 780ti Amp edition
Storage: 250SSD Samsung evo + Barracuda 1TB
PSU: 850 G2 EVGA
Operating System: Windows 7 Professional
All drivers are up to date.
So I have installed the creative cloud and then proceeded to install the applications in the following order: Media Encoder, Photoshop and Premiere Pro CC. Both media and photoshop have no problems but premiere pro CC crashes upon clicking on it.
I would click on the premiere pro CC button and the premiere pro loading screen will pop up but then the 'has stopped working error' will happen immediately.
I need to get this problem solved within the next couple of days because I need it for a very important video project. If this problem cannot be fixed in the next 2 days I will, unfortunately, have to refund my subscription with adobe (still within 28 days) and use Cyberlink or Vegas.
I tried searching the forums and google but haven't found a solution that works for me. Could someone please lend a hand?

Log Name:      Application
Source:        Windows Error Reporting
Date:          24/12/2014 02:24:37
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      TimothyNg-PC
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Adobe Premiere Pro.exe
P2: 8.2.0.65
P3: 5486db4a
P4: ImageRenderer.dll
P5: 8.2.0.65
P6: 5486b5ee
P7: c000001d
P8: 00000000001f5342
P9:
P10:
Attached files:
C:\Users\Timothy Ng\AppData\Local\Temp\WER1ADF.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Timothy Ng\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_c9e978dddf5d58a2727a44f4be9bc974f52b65b_153e222f
Analysis symbol:
Rechecking for solution: 0
Report Id: ffe49cc7-8b13-11e4-9225-7824af362b95
Report Status: 1
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-24T02:24:37.000000000Z" />
    <EventRecordID>2146</EventRecordID>
    <Channel>Application</Channel>
    <Computer>TimothyNg-PC</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>Adobe Premiere Pro.exe</Data>
    <Data>8.2.0.65</Data>
    <Data>5486db4a</Data>
    <Data>ImageRenderer.dll</Data>
    <Data>8.2.0.65</Data>
    <Data>5486b5ee</Data>
    <Data>c000001d</Data>
    <Data>00000000001f5342</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Users\Timothy Ng\AppData\Local\Temp\WER1ADF.tmp.WERInternalMetadata.xml</Data>
    <Data>C:\Users\Timothy Ng\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_c9e978dddf5d58a2727a44f4be9bc974f52b65b_153e222f</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>ffe49cc7-8b13-11e4-9225-7824af362b95</Data>
    <Data>1</Data>
</EventData>
</Event>

Keep getting "itunes has stopped working" error.

Keep getting "itunes has stopped working" error. Just updated to windows 8.1, updated java (i installed java on windows 8 for work), & ran the solve a problem with itunes fix from my pc. Still crashes when i go to itunes store or try to sync my ipod. Itunes says their is no solution, my pc can't find a solution, and I've tried several fixes online (copying the .dll file, running in safe mode, running as administrator, reinstalling itunes) nothing is working for me.

Hey Cassblue21,
Thanks for the question, and great troubleshooting so far. While you may have already attempted most of the steps outlined in this article, I wished to provide it to you just in case you missed something. The article includes great isolation steps to determine if the issue is user-specific, or system-wide. Once you have isolated the issue, a few solutions are offered:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

NWCE 7.1 EHP1 installation - server0 stopped with error code 2150

Hi All,
***I try to install NWCE 7.1 EHP1 with Oracle 10.2 on Windows Server 2003 Enterprise X64. On phase 29 of 40 Start Java Engine, it gives me this error:*****
WARNING[E] 2010-08-11 13:18:27.468
CJS-30222 Java process server0 of instance MII/J00 increased error count to 1. Giving up.
ERROR 2010-08-11 13:18:27.593
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|8|0|startJava was executed with status ERROR .
WARNING 2010-08-11 13:18:27.687
Could not get property IDs of the JavaScript object.
ERROR 2010-08-11 13:18:27.687
FJS-00010 Could not get value for property .
****I checked it on MMC and server0 stopped with error code 2150 (Core service start fails on initial startups )*****
std_server0 is here:
node name   : server0
host name   : sapmii
system name : MII
system nr. : 00
started at : Wed Aug 11 13:19:10 2010
JVMX version - Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode)
(CompilerOracle read from file D:\usr\sap\MII\J00\exe\sapjvm_5\jre\.hotspot_compiler )
(CompilerOracle exclude com/sun/tools/javac/code/SymbolMethodSymbol overrides)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [D:\usr\sap\MII\J00\j2ee\cluster\bin\index.list]
Reading kernel properties from kernelProperties.bin file...
   Checked the data for 15 ms
   Read the objects for 93 ms
   Substituted the values for 16 ms
Finished reading kernel objects for 109 ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.11.3710.34306.20081117170308] is starting server process [ID7616850] on host [sapmii]...
Loading [LogManager]... [31] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... [47] ms
Loading [ThreadManager]... [0] ms
Loading [ClassLoaderManager]... [32] ms
Loading [ClusterManager]... [140] ms
Loading [LockingManager]... [31] ms
Loading [ConfigurationManager]... [1000] ms
Loading [CacheManager]... [GC [ParNew: 436736K->8479K(655104K), 0.0153459 secs] 436736K->8479K(5024512K), 0.0154061 secs]
[47] ms
Loading [DatabaseManager]... [203] ms
Loading [SessionManager]... [141] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 312 ms.
Resolve components for : 31 ms.
Load components for 1953 ms.
Loading services.
Calculate startup service set for 125 ms.
Service [r3startup] started. [0] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [0] ms / [0] CPU ms
Service [webservices] started. [0] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [0] ms / [0] CPU ms
Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [0] ms / [0] CPU ms
Service [tc~je~security~api] started. [0] ms / [0] CPU ms
Service [cluster] started. [16] ms / [0] CPU ms
Service [runtimeinfo] started. [16] ms / [0] CPU ms
Service [jmx_notification] started. [31] ms / [15] CPU ms
Service [userstore] started. [47] ms / [0] CPU ms
Service [memory] started. [63] ms / [15] CPU ms
Service [timeout] started. [78] ms / [31] CPU ms
Service [cross] started. [94] ms / [46] CPU ms
Service [log_configurator] started. [94] ms / [31] CPU ms
Service [locking] started. [0] ms / [0] CPU ms
Service [tc~sec~destinations~provider] started. [125] ms / [109] CPU ms
Service [p4] started. [62] ms / [62] CPU ms
Service [classload] started. [0] ms / [0] CPU ms
Service [classload.facade] started. [0] ms / [0] CPU ms
Service [msp] started. [16] ms / [15] CPU ms
Service [classpath_resolver] started. [16] ms / [15] CPU ms
Service [deploy] start ================= ERROR =================
java.lang.IllegalArgumentException: No enum const class com.sap.engine.services.deploy.container.ComponentReference.SERVu0130CE
     at java.lang.Enum.valueOf(Enum.java:196)
     at com.sap.engine.services.deploy.container.ComponentReference.valueOf(ComponentReference.java:18)
     at com.sap.engine.services.deploy.server.Component.<init>(Component.java:44)
     at com.sap.engine.services.deploy.server.Component.create(Component.java:60)
     at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.readStandardAppRefs(PropManagerImpl.java:497)
     at com.sap.engine.services.deploy.server.properties.impl.PropManagerImpl.<init>(PropManagerImpl.java:234)
     at com.sap.engine.services.deploy.server.properties.PropManagerFactory.initInstance(PropManagerFactory.java:27)
     at com.sap.engine.services.deploy.server.DeployServiceFrame.start(DeployServiceFrame.java:56)
     at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
     at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [deploy] failed to start]
****What is the problem and how can I solve the problem.*****
Thanks.

Hi,
Based on the Java trouble shooting guide 'error 2150' indicates that a core service failed to start. http://wiki.sdn.sap.com/wiki/display/TechTSG/(JSTTSG)(Kernel)ExitCodes. Based on the threads below it could be Oracle listener related.
Re: FCO-00011 error occurred when install ECC6.0 SR3 IDES on Win2003_X64
Problem installing JAVA WAS - ERP 7.0 (EHP4) - NW 7.01 - RHEL 5.3 - ORACLE
HTH.
O.

J2EE Engine Stopped with Error 11113

Hi All,
After I changed some values in the Portal UME to connect to ECC 6.0, after the restart of cluster the J2EE is not coming up and getting stopped with Error 11113.
I have changed the Datasource to ABAP and tried resetting the values in Configtool as per the previous threads in the forum but could not get my J2EE engine up.
Please find the last some last line of "std_server0.out" file:
stdout/stderr redirect
node name   : server0
pid         : 3456
system name : EP7
system nr. : 01
started at : Wed May 07 12:35:19 2008
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 5340] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 7.00   PatchLevel is starting...
Loading: LogManager ... 562 ms.
Loading: PoolManager ... 16 ms.
Loading: ApplicationThreadManager ... 203 ms.
Loading: ThreadManager ... 62 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 234 ms.
Loading: LockingManager ... 250 ms.
Loading: ConfigurationManager ... 2203 ms.
Loading: LicensingManager ... 31 ms.
Loading: CacheManager ... 172 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (31 ms).
Service runtimeinfo started. (172 ms).
Service cafeucc~api started. (281 ms).
Service cross started. (219 ms).
Service timeout started. (156 ms).
Service file started. (500 ms).
Service userstore started. (78 ms).
Service jmx_notification started. (94 ms).
Service trex.service started. (156 ms).
Service p4 started. (282 ms).
Service classpath_resolver started. (46 ms).
Service log_configurator started. (7172 ms).
Service locking started. (0 ms).
Service naming started. (515 ms).
Service http started. (703 ms).
Service javamail started. (297 ms).
Service failover started. (219 ms).
Service appclient started. (203 ms).
Service ts started. (250 ms).
Service jmsconnector started. (297 ms).
Service licensing started. (32 ms).
Service cafeugpmailcf started. (281 ms).
Service connector started. (531 ms).
Service webservices started. (953 ms).
Service iiop started. (672 ms).
Service deploy started. (20344 ms).
Service MigrationService started. (47 ms).
Service bimmrdeployer started. (16 ms).
Service configuration started. (31 ms).
Service dbpool started. (2453 ms).
May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "'password' missing". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "{
receiverid_guest=master
poolmaxwait=10000
client=800
user=sapuser
sysnr=02
poolmaxsize=10
ashost=SAP4
receiverid=master
May 7, 2008 12:35:57 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_78] Fatal: Initialization of UME persistence adapter "R3_DATASOURCE" failed.
May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
May 7, 2008 12:35:57 PM   com.sap.security.core.InternalUMFactory [SAPEngine_System_Thread[impl:5]_78] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
     at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
     ... 6 more
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:346)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:211)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.api.UMException: Could not initialize principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: Could not instantiate principal factory class 'com.sap.security.core.imp.PrincipalFactory'!: 'password' missing
     at com.sap.security.core.InternalUMFactory.initializeClass(InternalUMFactory.java:1258)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:302)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:251)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
May 7, 2008 12:35:57 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_78] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Please take a look and help me in resolving this problem. Do let me know you need anymore other logs for analysis ?
Regards,
Srikar

Hi Karthik,
I have checked all the UME properties and are fine. I am trying to connect to ECC 6.0 Clnt 800 with Communication user I created called "portaluser" and the pwd along with system number and application host.
I tried giving all the details in Configtool > Ume properties but again the same problem J2EE is getting stopped with the same error.
About the SAPJSF user, it has been created while installation as a Dailog user in the EP system. I logged into the EP system and checked that in SU01. It there but not as a communication user but as a Dialog user.
Can you let me know what could be the issue ?
Regards,
Srikar
Edited by: Srikar Vankadaru on May 8, 2008 7:59 PM

Error connection system R3

Hi,
Today the following error is being produced:
When I start the portal, the test connection is ok, but after of some minutes the connection failed and the test is not correct.
The connection is Dedicated Application Server for R/3 System.
Thanks,
Mercedes

In the trace appeard the following:
#1.5#00110A31A778001F00000250000003F000040A76CEFE98D6#1137405302052#com.sap.engine.services.connector#sap.com/irj#com.sap.engine.services.connector#TYCO01TB31#4725####4a81f160867011da818800110a31a778#SAPEngine_Application_Thread[impl: 1
#1.5#00110A31A778001F00000250000003F000040A76CEFE98D6#1137405302052#com.sap.engine.services.connector#sap.com/irj#com.sap.engine.services.connector#TYCO01TB31#4725####4a81f160867011da818800110a31a778#SAPEngine_Application_Thread[impl
Message :
3]_35##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Additional information:
n.a.
Component:
File: ConnectionHashSet.java
Method: com.sap.engine.services.connector.jca.ConnectionHashSet.match
Line: 245
Can be that when arrive at a number of connections stop and no function?
Thanks,
Mercedes

STOP 0x0000007F Error - 6 systems

Similar Messages

Maybe you are looking for