STOP 7B start up error
Blue screens on start up. Safemode not working. Repair mode unable to fix or revert back. Nothing from f8 works.
Hi,
The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might
have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error.
Remove any recently added hardware, especially hard disk drives or controllers, to see if the error is resolved. If the problematic hardware is a hard disk drive, the disk firmware version might be incompatible with your version of the Windows operating
system.
http://msdn.microsoft.com/en-in/library/windows/hardware/ff559218(v=vs.85).aspx
Alex Zhao
TechNet Community Support
Similar Messages
-
iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.
Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.
-
When I try to download a song or a video on my ipad it starts to download and then before it finishes it stops and says download error. Tap to retry. Any suggestions on how to fix this error and get my items that I purchased to download?
MacBook Airs won't run Classic.
iTunes errors may best be isolated by one of the iTunes forums below:
https://discussions.apple.com/docs/DOC-2463 -
Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answerCould not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium -
When i try to burn my playlist it starts then stops and has a error code 4450
when i try to burn my playlist it starts the first song then stops and has a error code 4450
Hello Clubcon,
Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes. I recommend reviewing the following articles for steps to troubleshoot and resolve this issue:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Srvctl on 11.2.0.3 does not stop and start listeners
I recently installed the Grid software under the "grid" user on RH5. Clusterware and ASM run under GRID_HOME, the single instance database runs under ORACLE_HOME. I have created 2 listeners on non-default ports (manually using entried in listener.ora) and then added to srvctl (srvctl add listerner -l LISTENER_XPT -o /app/oracle/product/dhome_1 -p "TCP:1523" -- in ORACLE_HOME.
When stopping the listener using:
oracle@#####>srvctl stop listener -l LISTENER_XPT -- note starting with oracle user in ORACLE_HOME. Below is from "/app/grid/product/11.2.0/grid/log/server_name/agent/ohasd/oraagent_grid/oraagent_grid.log
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) TNS-00511: No listener
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) Linux Error: 111: Connection refused
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:)Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check]
**********FROM TAILING THE listener LOG ****************************
TNS-01190: The user is not authorized to execute the requested listener command
12-JUN-2012 12:44:12 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=10.5.87.5)(PORT=1523)(IP=FIRST))"
12-JUN-2012 12:50:02 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
TNS-01190: The user is not authorized to execute the requested listener command
12-JUN-2012 15:12:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_ADMIN)(VERSION=186647296)) * status * 0
12-JUN-2012 15:12:58 * version * 0
12-JUN-2012 15:12:58 * service_register * LsnrAgt * 1195
TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=********)(PORT=1524)(IP=FIRST))"
12-JUN-2012 15:12:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=********)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
12-JUN-2012 15:13:05 * (CONNECT_DATA=(SID=PRDRAC01)(CID=(PROGRAM=perl)(HOST=********)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=*******)(PORT=41398)) * establish * PRDRAC01 * 0
Why wouldnt the Oracle user not be able to start/stop a resource from ORACLE_HOME ? Any assistance would be helpfulI just removed the listener out of the ORACLE_HOME and added it using srvctl to the GRID_HOME. Now I am able to stop and start.
Still the question, why cant oracle user start an oracle_home managed resource. But the oracle user could start and stop using lsnrctl stop/start
Below if the results from ps (note I just started listener from GRID_HOME):
grid@PRODBLD:+ASM>ps -ef |grep lsnr
grid 9114 1 0 09:40 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER_ADMIN -inherit
grid 10348 1 0 Jun12 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 20234 21990 0 09:49 pts/2 00:00:00 grep lsnr
oracle 29926 1 0 Jun12 ? 00:00:00 /app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr LISTENER_XPT -inherit -
Wiki (Web) start issue - have to stop and start to work
On my server, I reboot servers weekly. In order to get web services working (to get to wiki pages) I have to stop, then start the services. If I do not, then when going to any wiki pages i get the message "server is starting". to be clear, all other colaboration services are working (ie chat, ical, and address book). After stopping and re-starting the web services, everything is happy untill the next reboot (does seem to be related to rebooting only, not stopping and then starting the services while the machine is running)
Log: apache2/error_log
Fri Jan 27 09:05:05 2012] [notice] Graceful restart requested, doing restart
[Fri Jan 27 09:05:06 2012] [notice] Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 PHP/5.3.6 configured -- resuming normal operations
[Fri Jan 27 09:05:06 2012] [warn] long lost child came home! (pid 330)
[Fri Jan 27 09:05:40 2012] [notice] caught SIGTERM, shutting down
[Fri Jan 27 09:05:42 2012] [notice] Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 PHP/5.3.6 configured -- resuming normal operations
[Fri Feb 03 17:12:31 2012] [notice] caught SIGTERM, shutting down
[Fri Feb 03 17:13:43 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Feb 10 17:30:33 2012] [notice] caught SIGTERM, shutting down
[Fri Feb 10 17:31:43 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Feb 17 17:06:22 2012] [notice] caught SIGTERM, shutting down
[Fri Feb 17 17:07:14 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Mar 09 17:22:36 2012] [notice] caught SIGTERM, shutting down
[Fri Mar 09 17:23:43 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Tue Mar 13 11:28:42 2012] [notice] caught SIGTERM, shutting down
[Tue Mar 13 11:28:43 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Mar 23 17:02:27 2012] [notice] caught SIGTERM, shutting down
[Fri Mar 23 17:03:39 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Mar 30 17:21:34 2012] [notice] caught SIGTERM, shutting down
[Fri Mar 30 17:22:51 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Apr 06 17:15:52 2012] [notice] caught SIGTERM, shutting down
[Fri Apr 06 17:16:51 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Apr 13 17:03:41 2012] [notice] caught SIGTERM, shutting down
[Fri Apr 13 17:04:39 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Tue Apr 24 03:15:09 2012] [notice] SIGHUP received. Attempting to restart
[Tue Apr 24 03:15:09 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Fri Apr 27 17:09:53 2012] [notice] caught SIGTERM, shutting down
[Fri Apr 27 17:22:54 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
[Tue May 01 11:54:11 2012] [notice] caught SIGTERM, shutting down
[Tue May 01 11:54:13 2012] [notice] Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.8 configured -- resuming normal operations
Log: /wikid/error.log
2012-05-01 00:02:52-0400 [-] no groups
2012-05-01 00:12:52-0400 [-] no groups
2012-05-01 00:22:52-0400 [-] no groups
2012-05-01 00:32:52-0400 [-] no groups
2012-05-01 00:42:52-0400 [-] no groups
2012-05-01 00:52:52-0400 [-] no groups
2012-05-01 01:02:52-0400 [-] no groups
2012-05-01 01:12:52-0400 [-] no groups
2012-05-01 01:22:52-0400 [-] no groups
2012-05-01 01:32:52-0400 [-] no groups
2012-05-01 01:42:52-0400 [-] no groups
2012-05-01 01:52:52-0400 [-] no groups
2012-05-01 02:02:52-0400 [-] no groups
2012-05-01 02:12:52-0400 [-] no groups
2012-05-01 02:22:52-0400 [-] no groups
2012-05-01 02:32:52-0400 [-] no groups
2012-05-01 02:42:52-0400 [-] no groups
2012-05-01 02:52:52-0400 [-] no groups
2012-05-01 03:02:52-0400 [-] no groups
2012-05-01 03:12:52-0400 [-] no groups
2012-05-01 03:22:52-0400 [-] no groups
2012-05-01 03:32:52-0400 [-] no groups
2012-05-01 03:42:52-0400 [-] no groups
2012-05-01 03:52:52-0400 [-] no groups
2012-05-01 04:02:52-0400 [-] no groups
2012-05-01 04:12:52-0400 [-] no groups
2012-05-01 04:22:52-0400 [-] no groups
2012-05-01 04:32:52-0400 [-] no groups
2012-05-01 04:42:52-0400 [-] no groups
2012-05-01 04:52:52-0400 [-] no groups
2012-05-01 05:02:52-0400 [-] no groups
2012-05-01 05:12:52-0400 [-] no groups
2012-05-01 05:22:52-0400 [-] no groups
2012-05-01 05:32:52-0400 [-] no groups
2012-05-01 05:42:52-0400 [-] no groups
2012-05-01 05:52:52-0400 [-] no groups
2012-05-01 06:02:52-0400 [-] no groups
2012-05-01 06:12:52-0400 [-] no groups
2012-05-01 06:22:52-0400 [-] no groups
2012-05-01 06:32:52-0400 [-] no groups
2012-05-01 06:42:52-0400 [-] no groups
2012-05-01 06:52:52-0400 [-] no groups
2012-05-01 07:02:52-0400 [-] no groups
2012-05-01 07:12:52-0400 [-] no groups
2012-05-01 07:22:52-0400 [-] no groups
2012-05-01 07:32:52-0400 [-] no groups
2012-05-01 07:42:52-0400 [-] no groups
2012-05-01 07:52:52-0400 [-] no groups
2012-05-01 08:02:52-0400 [-] no groups
2012-05-01 08:12:52-0400 [-] no groups
2012-05-01 08:22:52-0400 [-] no groups
2012-05-01 08:32:52-0400 [-] no groups
2012-05-01 08:42:52-0400 [-] no groups
2012-05-01 08:52:52-0400 [-] no groups
2012-05-01 09:02:52-0400 [-] no groups
2012-05-01 09:12:52-0400 [-] no groups
2012-05-01 09:22:52-0400 [-] no groups
2012-05-01 09:32:52-0400 [-] no groups
2012-05-01 09:42:52-0400 [-] no groups
2012-05-01 09:52:52-0400 [-] no groups
2012-05-01 10:02:52-0400 [-] no groups
2012-05-01 10:12:52-0400 [-] no groups
2012-05-01 10:22:52-0400 [-] no groups
2012-05-01 10:32:52-0400 [-] no groups
2012-05-01 10:42:52-0400 [-] no groups
2012-05-01 10:52:52-0400 [-] no groups
2012-05-01 11:02:52-0400 [-] no groups
2012-05-01 11:12:52-0400 [-] no groups
2012-05-01 11:22:52-0400 [-] no groups
2012-05-01 11:32:52-0400 [-] no groups
2012-05-01 11:42:52-0400 [-] no groups
2012-05-01 11:52:52-0400 [-] no groups
2012-05-01 11:54:11-0400 [-] Received SIGTERM, shutting down.
2012-05-01 11:54:11-0400 [-] Stopping
2012-05-01 11:54:11-0400 [-] userPrefsFlushLooper stopped looping, doing final flush
2012-05-01 11:54:11-0400 [-] mailingListFlushLooper stopped looping, doing final flush
2012-05-01 11:54:11-0400 [-] no groups
2012-05-01 11:54:11-0400 [-] Unhandled error in Deferred:
2012-05-01 11:54:11-0400 [-] Unhandled Error
Traceback (most recent call last):
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/threadi ng.py", line 497, in __bootstrap
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/threadi ng.py", line 522, in __bootstrap_inner
File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/threadi ng.py", line 477, in run
--- <exception caught here> ---
File "/usr/share/caldavd/lib/python/twisted/python/threadpool.py", line 210, in _worker
result = context.call(ctx, function, *args, **kwargs)
File "/usr/share/caldavd/lib/python/twisted/python/context.py", line 59, in callWithContext
return self.currentContext().callWithContext(ctx, func, *args, **kw)
File "/usr/share/caldavd/lib/python/twisted/python/context.py", line 37, in callWithContext
return func(*args,**kw)
File "/usr/share/wikid/lib/python/apple_utilities/service.py", line 112, in delayedStart
RepositoryManager.ensureRepository()
File "/usr/share/wikid/lib/python/apple_utilities/RepositoryManager.py", line 55, in ensureRepository
_ensureDirectoryWithReadWriteAccess(path)
File "/usr/share/wikid/lib/python/apple_utilities/RepositoryManager.py", line 27, in _ensureDirectoryWithReadWriteAccess
_ensureDirectory(inPath)
File "/usr/share/wikid/lib/python/apple_utilities/RepositoryManager.py", line 24, in _ensureDirectory
os.mkdir(inPath)
exceptions.OSError: [Errno 2] No such file or directory: '/Volumes/Cota_Files/Library/Collaboration'
2012-05-01 11:54:11-0400 [-] Main loop terminated.
2012-05-01 11:54:11-0400 [-] Server Shut Down.
2012-05-01 11:54:15-0400 [-] Log opened.
2012-05-01 11:54:15-0400 [-] twistd 8.2.0 (/usr/bin/python 2.6.1) starting up.
2012-05-01 11:54:15-0400 [-] reactor class: twisted.internet.selectreactor.SelectReactor.
2012-05-01 11:54:15-0400 [-] Current log level is warn
2012-05-01 11:54:15-0400 [-] twisted.web.server.Site starting on 8086
2012-05-01 11:54:15-0400 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2012-05-01 11:54:15-0400 [-] Starting
2012-05-01 11:54:16-0400 [-] u"Couldn't load preferences for:traceyfarquharcotaoilcom at /Volumes/Cota_Files/Library/Collaboration/User Preferences/traceyfarquharcotaoilcom.plist"
2012-05-01 11:54:17-0400 [-] in migration. repo version is: 23
2012-05-01 11:54:17-0400 [-] Running
2012-05-01 11:54:28-0400 [-] 127.0.0.1 - - [01/May/2012:15:54:27 +0000] "POST / HTTP/1.1" 200 130 "-" "Twisted/XMLRPClib"
2012-05-01 11:54:28-0400 [HTTPChannel,1,127.0.0.1] 127.0.0.1 - - [01/May/2012:15:54:27 +0000] "POST / HTTP/1.1" 200 129 "http://aphrodite.cotaoil.net/groups/cotaedu/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
2012-05-01 11:54:28-0400 [-] 127.0.0.1 - - [01/May/2012:15:54:27 +0000] "POST / HTTP/1.1" 200 130 "-" "Twisted/XMLRPClib"
2012-05-01 11:54:28-0400 [-] 127.0.0.1 - - [01/May/2012:15:54:27 +0000] "POST / HTTP/1.1" 200 57751 "http://aphrodite.cotaoil.net/groups/cotaedu/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
2012-05-01 11:54:29-0400 [HTTPChannel,3,127.0.0.1] 127.0.0.1 - - [01/May/2012:15:54:28 +0000] "POST / HTTP/1.1" 200 138 "http://aphrodite.cotaoil.net/groups/cotaedu/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
2012-05-01 11:54:29-0400 [-] 127.0.0.1 - - [01/May/2012:15:54:28 +0000] "POST / HTTP/1.1" 200 130 "-" "Twisted/XMLRPClib"
2012-05-01 11:54:29-0400 [-] 127.0.0.1 - - [01/May/2012:15:54:28 +0000] "POST / HTTP/1.1" 200 130 "-" "Twisted/XMLRPClib"
2012-05-01 12:44:29-0400 [-] 127.0.0.1 - - [01/May/2012:16:44:28 +0000] "POST / HTTP/1.1" 200 57751 "http://aphrodite.cotaoil.net/groups/cotaedu/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
Log: wikid/access.log - this just shows my attemtps to hit a bookmark to /groups/cotaedu/wiki/167af/Adding_a_new_account.html not sure its relevant
a/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
aphrodite.cotaoil.net - unauthenticated [01/May/2012:11:50:10 -0400] "GET /groups/cotaedu/wiki/167af/Adding_a_new_account.html HTTP/1.1" 503 1428 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
aphrodite.cotaoil.net - unauthenticated [01/May/2012:11:50:16 -0400] "GET /groups/cotaedu/wiki/167af/Adding_a_new_account.html HTTP/1.1" 503 1428 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:12.0) Gecko/20100101 Firefox/12.0"
Thanks for any and all help.Apple Mobile Device not Starting
· Windows Vista or Windows 7
In the Start SearchServices.
In the Programs
Select Apple Mobile DeviceStop the service
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device. -
How to stop and start MDBs to listen for JMS messages
Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
The arhitecture we used was something like this :
1.Client sends a persistent message to a queue. (order)
2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
Now.. Why am I telling this story..
I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
Best regards
Hans-Jacob MelbyBreakpoints, whether normal or conditional, are just meant for debugging of your code. I had the sense from your question that the pausing you want to do is a part of normal operation of your code. I would NOT recommend using a breakpoint for that situation. It would bring up the block diagram showing the breakpoint when it occurs. A user besides the programmer would not know what to do in that case.
Yes, both the inner and outer loops would have shift registers.
Putting a case structure with a small while loop inside the "Pausing Case" is doable. It just depends on what you are doing or waiting for while the program operation is "paused". -
How to stop and start process SAPOSCOL
Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
Collector : running
Start time coll. : Mon May 21 17:49:49 2007
Current Time : Mon Jun 11 13:27:51 2007
Last write access : Tue May 29 06:23:46 2007
Last Read Access : Mon Jun 11 13:26:24 2007
When i try to stop the saposcol i get the following error:
igzadm> saposcol -k
Setting Stop Flag :
13:24:44 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
13:24:44 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.exes.
Am doing this command through SID<ADM> from change directory /run.
Please help me how to check the permission of the SIDADM to stop the services.
I also try the same from root user but now use..
Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
Advance Thanks.
Suri TysonHi, i have the following permission for saposcol
imserv:/ # ps -ef | grep saposcol | more
root 118842 528422 0 14:02:17 pts/2 0:00 grep saposcol
I have changed the ownership as you mentioned....
imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
However, i still get the error as:
igzadm> saposcol -k
Setting Stop Flag :
14:12:13 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
14:12:13 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.
Now the permission are set in my system as:
igzadm> ps -ef |grep saposcol|more
igzadm 729196 983058 0 14:13:25 pts/2 0:00 grep saposcol -
XML import - stopped due to "critical error"
Hi all. For the moment, I'm still working with FCS1/FCP 5.1.4, OS 10.4.11.
In the past, when I've needed to open a project I've started on other machines running 6.0.x, I've done an XML export, and imported said xml file into a new project on my machine. If I recall correctly, XML type 2 worked just fine.
Well, it doesn't work now, and I'm wondering why?
The machine I'm exporting from is running OS10.4.11, and FCP 6.0.3. I've exported the project out of there in all flavors of xml (1,2,3 and 4), with and without clip metadata. And I get nothing on import, bupkus, nada, zilch and zero...except for the oh-so-helpful message "XML import stopped due to critical error"
So who broke this?I've had this happen to me when the original project contained sequences that used filters not supported by 5.1.4.
My solution was to strip out suspect filters until it worked.
Best,
Tom -
Canon MF5950dw throwing Stopped - 'filter' failed printer error
We just bought a Canon MF5950dw printer, and on a MBA running 10.8.2 when we try to print anything over the network, it'll stop with the error: Stopped - 'filter' failed.
I've:
repairing permissions from the rescue disk
tried deleting and re-adding the printer
uninstalled and reinstalled the drivers
reset the CUPS printing system
and nothing has helped. The MBA has no problem printing to our old printers. It works fine on the my MBP running 10.8.2 and our Windows 7 machines. It persists whether I set it up as a Bonjour printer or an IP printer.
Anyone know how to fix this? thanks!
Below is the cups error_log:
E [19/Jan/2013:16:29:39 -0500] [Job 6] Job stopped due to filter errors; please consult the error_log file for details.
D [19/Jan/2013:16:29:39 -0500] [Job 6] The following messages were recorded from 16:29:38 to 16:29:39
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding start banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Queued on "Canon_MF5900_Series" by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Auto-typing file...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Request file type is application/vnd.cups-banner.
D [19/Jan/2013:16:29:39 -0500] [Job 6] File of type application/vnd.cups-banner queued by "kelly".
D [19/Jan/2013:16:29:39 -0500] [Job 6] Adding end banner page "none".
D [19/Jan/2013:16:29:39 -0500] [Job 6] time-at-processing=1358630978
D [19/Jan/2013:16:29:39 -0500] [Job 6] job-sheets=none,none
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[0]="Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[1]="6"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[2]="kelly"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[3]="testprint"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[4]="1"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=16929 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:62e1ae28-d482-3786-78e4-bade79b0939a job-originating-host-name=localhost time-at-creation=1358630978 time-at-processing=1358630978 PageSize=Letter"
D [19/Jan/2013:16:29:39 -0500] [Job 6] argv[6]="/private/var/spool/cups/d00006-001"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[0]="<CFProcessPath>"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[9]="HOME=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[11]="SERVER_ADMIN=root@localhost"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[12]="SOFTWARE=CUPS/1.6svn"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[14]="USER=root"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[15]="CUPS_MAX_MESSAGE=2047"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[18]="IPP_PORT=631"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[19]="CHARSET=utf-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[20]="LANG=en_US.UTF-8"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[21]="APPLE_LANGUAGE=en-US"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[22]="PPD=/private/etc/cups/ppd/Canon_MF5900_Series.ppd"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[23]="RIP_MAX_CACHE=128m"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[24]="CONTENT_TYPE=application/vnd.cups-banner"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[25]="DEVICE_URI=dnssd://Canon%20MF5900%20Series._pdl-datastream._tcp.local ./?bidi"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[26]="PRINTER_INFO=Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[27]="PRINTER_LOCATION="
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[28]="PRINTER=Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[29]="PRINTER_STATE_REASONS=none"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[30]="CUPS_FILETYPE=document"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_MF5900_Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] envp[32]="AUTH_I****"
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 1149)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started filter /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl (PID 1150)
D [19/Jan/2013:16:29:39 -0500] [Job 6] Started backend /usr/libexec/cups/backend/dnssd (PID 1151)
D [19/Jan/2013:16:29:39 -0500] [Job 6] capdftopdl start.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series._pdl-datastream._tcp.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolving "Canon MF5900 Series", regtype="_pdl-datastream._tcp", domain="local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking for printer.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [19/Jan/2013:16:29:39 -0500] [Job 6] Resolved as "socket://Canon0b182e.local.:9100/"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -connecting-to-device,offline-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] Executing backend "/usr/libexec/cups/backend/socket"...
D [19/Jan/2013:16:29:39 -0500] [Job 6] load_banner(filename="/private/var/spool/cups/d00006-001")
D [19/Jan/2013:16:29:39 -0500] [Job 6] Page = 612x792; 14,14 to 598,778
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: +connecting-to-device
D [19/Jan/2013:16:29:39 -0500] [Job 6] Looking up "Canon0b182e.local."...
D [19/Jan/2013:16:29:39 -0500] [Job 6] hrDeviceDesc="Canon MF5900 Series"
D [19/Jan/2013:16:29:39 -0500] [Job 6] prtMarkerColorantValue.1.1 = "black"
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-colors=#000000
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-names='"Canon CRG119 Black Toner"'
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-types=toner
D [19/Jan/2013:16:29:39 -0500] [Job 6] ATTR: marker-levels=100
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_supply_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -developer-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-near-eol-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -opc-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-low-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -toner-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -waste-receptacle-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-almost-over-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -cleaner-life-over-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] new_state=0, change_state=ffff
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-empty-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -door-open-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -media-jam-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -input-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-tray-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -marker-supply-missing-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-almost-full-report
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -output-area-full-warning
D [19/Jan/2013:16:29:39 -0500] [Job 6] backendWaitLoop(snmp_fd=5, addr=0x7fe17b410178, side_cb=0x10a2e1013)
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] align for banner 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1149 (/usr/libexec/cups/filter/cgbannertopdf) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] STATE: -com.canon.unsupportedsize-error
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1151 (/usr/libexec/cups/backend/dnssd) exited with no errors.
D [19/Jan/2013:16:29:39 -0500] [Job 6] PID 1150 (/Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl) stopped with status 1.
D [19/Jan/2013:16:29:39 -0500] [Job 6] Hint: Try setting the LogLevel to "debug" to find out more.
D [19/Jan/2013:16:29:39 -0500] [Job 6] End of messages
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state=3(idle)
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-message="Filter failed"
D [19/Jan/2013:16:29:39 -0500] [Job 6] printer-state-reasons=noneMaybe this will help:
https://discussions.apple.com/thread/4158755?tstart=0
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. -
Monitor stopped due to setup error or custom action
Hi folks,
i have installed the sun cluster and created a resource group for my oracle database. I have created resourece's for database server and or listener.
My question is when I am issuing the scstat command on my oracle server resource i get the following mesg.
"Monitor stopped due to setup error or custom action"
What does it means, does anybody give me some hint about it.
- Resource Groups and Resources --
Group Name Resources
Resources: aaa-rg DB1-aaa-rs aaa-lh-rs aaa-srv-rs aaa-lsnr-rs
-- Resource Groups --
Group Name Node Name State
Group: aaa-rg medsrv5 Online
Group: aaa-rg medsrv6 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: DB1-aaa-rs medsrv5 Online Online
Resource: DB1-aaa-rs medsrv6 Offline Offline
Resource: aaa-lh-rs medsrv5 Online Online - LogicalHostname online.
Resource: aaa-lh-rs medsrv6 Offline Offline - LogicalHostname offline.
Resource: aaa-srv-rs medsrv5 Online Unknown - Monitor stopped due to setup error or custom action.
Resource: aaa-srv-rs medsrv6 Offline Offline
Resource: aaa-lsnr-rs medsrv5 Online Online
Resource: aaa-lsnr-rs medsrv6 Offline Offlinei check the /var/adm/message log and find out fallowing message
Jun 19 14:07:27 medsrv5 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource sas-srv-rs status on node medsrv5 change to R_FM_UNKNOWN
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 564643 local7.error] Fault monitor detected error DBMS_ERROR: 1017 DEFAULT Action=STOP : Please correct login information in HA-DBMS Oracle database configuration
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 780539 local7.error] Stopping fault monitor: DBMS_ERROR:1017:Please correct login information in HA-DBMS Oracle database configuration
Jun 19 14:07:27 medsrv5 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource sas-srv-rs status msg on node medsrv5 change to <Monitor stopped due to setup error or custom action.>
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 796592 local7.error] Monitor stopped due to setup error or custom action.
and then i notice that i am using "sqlplus '/ as sysdba'" as Connect_strings, that is why i can start/stop the database but not able to monitor the database, for that i need to create an oracle account as it mentioned in "sun cluster data service for HA-Oracle" like
# sqlplus �/as sysdba�
grant connect, resource to user identified by passwd;
alter user user default tablespace system quota 1m on
system;
grant select on v_$sysstat to user;
grant create session to user;
grant create table to user;
exit;
i would appriciate your update if i m doing some thing wrong here
thanks -
Problem stop and start the ias 6.0
Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.esHi,
This really looks like a problem, kindly let me know the following...
- The O/S version & the web server with the service pack
- What method are you using to start & stop the application & web
server ?
- What application are you invoking to see this error ?
Regards
Raj
Ignacio Ramos Garcia wrote:
Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.es -
Is it necessary to regularly stop and start application to free memory?
Do we need to stop and start an application regularly to free memory and increase performance? We have had random dynamic calc errors that went away after a stop/start.
A consultant recommended we script a stop/start to run once per day. We are on version 7.
I am concerned if the script stops an application while a calc is in progress - database corruption might occur.
Thanks,
JOne big thing you should realize is that if your memory settings are really too large it does not manifest right away. As you perform certain actions the memory is allocated. So if you are on 32-bit Essbase which you are on a V7 platform the combination of your index + page + memory to support outline + calc caches * # of concurrent calcs + dynamic calc cache + about 200 MB needs to all be under 2 GB; when/if you get to a point of too much memory allocation you start getting quite a few interesting errors. Shutting down/starting up is not a proper long term way to manage memory issues -- properly setting the caches and other configurations is proper to resolve long term for that.
Regards,
John A. Booth
http://www.metavero.com
Maybe you are looking for
-
Can I get a refund for my iPad if it's faulty?
I have the original iPad that I bought at the end of august last year. But it thinks that there are headphone plugged in when the clearly isn't. I have booked a genius bar appointment for Friday and was wondering if the fault is a legitimate one if I
-
Changing sales order for a Credit blocked customer
Hi Gurus One of the requirement of my client is that they create sales order for a customer and deliver the goods. During sales order creation billing block is automatically applied. This block is removed by a batch job after the goods are delivered.
-
App for Editing Excel/Numbers document while using VGA/iPad/Projector
Is there an app that will allow you to edit a spreadsheet while it is projected using the VGA adapter with an iPad connected to a projector? For example, you are doing a budget in a meeting room using the iPad and a projector, and you need to change
-
Embed VI in MS Powerpoint, and Then Click on to Run it from Powerpoint?
Is the above doable? If so, how? (Am also willing to create .exe and embed and run it instead of VI but VI is first choice). Thanks, Don Message Edited by DonRoth on 09-12-2008 02:46 PM
-
Hi, I'm new on the UWL development and currently working on a custom connector. I have added new attributes to the UWLSystems.cc.xml (path in configarchive file: install\meta\lib\com.sap.netweaver.bc.uwl\systems\UWLSystems.cc.xml ) so that backend in