Stop ACS 5.0 upgrade in progress

How do I stop an FTP upgrade if it is pointed to an incorrect FTP location.

Was this operation done from the GUI? If so I think can go to:
System Administration > Operations > Distributed System Management > Edit: "hostname"
If a software update is in progress for this server should see a "cancel software update" button

Similar Messages

ACS upgrade from 4.0.x to 4.1.x "Appliance upgrade in progress"

Hello friends,
We are in the process of upgrading ACS 4.0 to 4.1 in a SE appliance 1113.
We followed very carefuly the steps, and upgraded de Appliance management ACS 4.1. The second upgrade (Software for appliance 4.1) keeps showing "Appliance upgrade in progress..." (near 2 hours by now). I know that it can stick even finishing, but it seems it has not finished because we can not log in with the GUI Administrator account like we did when upgrading the management software (previous step).
Is this normal? what can be missing?, I attach the console text output below (IP adds obscured).
Note the management upgrade went fine.
Thanks.
Cisco Secure ACS: 4.1.1.23
ACS 4.0.1.49-CSAdmin-CSCsd96293_CSCse26719 Fix: (Patch: 4.0.1.49 Tue 01/09/2007
7:50:00.17)
Appliance Management Software: 4.1.1.23
Appliance Base Image: 4.0.1.2
CSA build 4.0.1.543.2: (Patch: 4_0_1_543)
Appliance upgrade in progress...
Session Timeout: 10
Last Reboot Time: Fri Jun 06 11:46:40 2008
Current Date & Time: 6/6/2008 13:17:40
Time Zone: (GMT-05:00) Bogota, Lima, Quito
NTP Server(s): 131.107.1.10
CPU Load Free Disk Free Physical Memory
0.00% 16.9 GB 765 MB
Appliance IP Configuration
DHCP Enabled. . . . . . . . . . .: No
IP Address. . . . . . . . . . . .: 172.16.x.y
Subnet Mask . . . . . . . . . . .: 255.255.255.0
Default Gateway . . . . . . . . .: 172.6.x2.y2
DNS Servers . . . . . . . . . . .: 172.16.x3.y3
CSAdmin running
CSAuth running
CSDbSync running
CSLog running
CSMon running
CSRadius running
CSTacacs running
CSAgent stopped
Appliance upgrade in progress...

Thanks Jagdeep, but the upgrade has not finished.
The documentation mentions (please read it carefully):
"IF YOU COMPLETE THE UPGRADE and the ACS console displays the message Appliance upgrade in progress, this indicates that the upgrade PROGRESS is hanging.
If this condition occurs, start an ACS console session and enter the command download [hostAddress], where hostAddress can be any IP address. This action releases the ACS console from the upgrade process."
What worries me is that it has not finished.
As I said in my post, we can not log in :( (the GUI gets blocked during the upgrade).
I appreciate the help. Many Thanks.

Outlook 2013 "Upgrade In Progress"

I recently got Office 2013 and since I have it, my outlook has been displaying "upgrade in progress" because of which I can't log in or add an account!
I have done the whole "repair" for it twice and it's still displaying the same message. This is really frustrating me.
If there's still a way to fix it then let me know please.
Thank you

Hi,
To resolve the issue, try Online Repair:
Control Panel > Program and Features > Microsoft Office > Change > Online Repair.
If this doesn't work, please uninstall Office and reinstall it.
Regards.
Melon Chen
TechNet Community Support

Scshutdown fails - "Rolling Upgrade in progress"

Anybody seen this before?
bash$ sudo scshutdown -g 0 -y
scshutdown: Cannot shutdown the cluster. Rolling Upgrade in progress.
bash$
No one has (with intention) started an upgrade on this cluster.. Its SC3.1 U2 on Solaris 8.

While you are saying that no one hast started an upgrade, is it possible that this cluster got recently patched with current Sun Cluster patches?
If so, you might want to check if the follwoing binary exists on your cluster:
/usr/cluster/bin/scversions
If it exists, just call it.
If you see something like:
# scversions
Upgrade commit is NOT needed. All versions match.
then I don't know what your problem is. However, if it says something different, you might want to try:
# scversions -c
and see if the problem went away.
Greets
Thorsten

Internet Explorer stopped working when I upgraded to Parallels 6

I am fairly capable with computers and software, so your direction to a helpful resource would be appreciated if you don't know specifically how to address my problem.
I am new to Apple as of this past April and I am still adjusting from the PC world. However, many of my programs still need Windows and one on-line subscription requires Internet Explorer. I installed Parallels and Windows 7 on my MacBookPro.
Internet Explorer 8 stopped working when I upgraded Parallels from Version 5 to Version 6. It gave me an error message and did not open. IE8 had worked just fine on Parallels 5. My inquiries to Parallels went unanswered. Nor could find a solution on the Parallels website or the internet, in general. I downloaded and tried to install IE9 Beta from the Microsoft website when I saw it offered when I tried to find a solution to my IE8 problem on-line (Safari still works). Now I receive an error message "Internet Explorer did not finish installing". But, I am unable to finish its installation or remove it so I can start over.
Any ideas??

I think your problem is specific to Windows. You would have better luck in Windows-specific sites such as this one: http://support.microsoft.com/gp/pcieintro

Updated Firefox is not compatible with my low vision software - Zoomtext. How can I get Firefox to stop asking me to upgrade!!

Currently using version 3.6.27 as the updated versions are not compatible with my low vision software called Zoomtext. I constantly get Firefox asking me to upgrade. How can I get it to stop asking me to upgrade. (I have tried each upgrade and they are all incompatible with Zoomtext.

Go to '''Options''' window > '''Advanced''' panel > '''Update''' tab > '''Firefox updates '''> click '''Never check for updates (not recommended: security risk)''', click '''OK''' to save it, exit firefox and restart it.
see for more info: [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel#w_update-tab Options window - Advanced panel - Update tab]
BUT you see the warning : Warning: If you select this option, you will not receive '''critical security updates that may keep you safe online''' unless you frequently do a '''manual check for updates'''.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

My camera connection kit stopped working after I upgraded to ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

How to stop iphone 4s to upgrade its ios...? is it possibile?

is it really possible to stop iphone 4s from upgrading its IOS? seriously i dont want its upgrades cause it makes my games crash!!! everytime i play with my games it crash just because i upgraded the IOS from 6.0 to 7.0.3

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Then try the Updates one at a time...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Outlook 2013 displaying "Upgrade in Progress" problem. Possible Patching issue?

Some of our Outlook 2013 clients have been displaying "upgrade in progress" It was doing this for hours. I could no longer get new mails while this was happening. It all started after we had patches installed. Since we are using
this new system for patch installation I think it could have been a patch that would have caused this. It could be any number of factors but the new patch management system we have could have installed a patch we normally do not have.
Some factors to consider:
1.) I had Outlook 2010 on my computer as well. I uninstalled this and it did not fix.
2.) Was running Outlook 2013 for months with no issue.
3.) We use Office 365 for our corporate email.
4.) Altiris (Symantec Management Console) is being used to patch our machines and it started after patches were installed.
Control Panel > Program and Features > Microsoft Office > Change > Online Repair. fixed the problem.
I was hoping someone maybe to help explain how this could have happened.
Since the computers having this problem are in our test environment and we have not yet deployed Altiris patching solution for the rest of the company yet is a relief but we would like to know if anyone else may have had a problem with this after a certain
patch that maybe they can identify.
Thank you!

Hi,
Did the patches you installed include some update for other version of Office?
Last time I see this issue is when two versions of Outlook (Outlook 2010 and Outlook 2013) are installed on one computer. Please check if the clients with this problem are installed two versions of Outlook. Although we can have two versions of
Outlook on the same machine, only one version of Outlook can run at a time. Moreover, when we install Outlook 2013 first and then Outlook 2010, it may cause some unwanted issues. The method to fix such issue is to repair Office 2013.
So I guess there are some updates for Outlook 2010 in the patches which caused the conflict of two versions of Outlook.
Flynn

I have a MacBook Air running OSX 10.74. I've tried 3 time to upgrade the to the latest OSX. The upgrades downloaded, but when they start to install the operation stops and says the upgrades did not install because an error occurred.

I've tried 3 times to upgrade my operating system. Each time the upgrade is downloaded, but when it starts to install the upgrades, it stops and says the upgrades were not installed because an error occurred. No mention of what the error was.
My computer is a MacBoor Air running OSX 10.74.

Hi ..
If you are trying to upgrade to Mavericks, make sure your Mac meets the requirements > OS X Mavericks: System Requirements
And make sure there's enough free storage space. Mavericks requires about 8GB's.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
If it's not a storage space issue ...
Apps such as Little Snitch, Growl, MacKeeper, and anti virus software can prevent apps from downloading including OS X upgrades
Disable anti virus software if installed
Check the firewall in System Preferences > Security & Privacy > Firewall > Firewall Options
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

SugarCRM stops working after Leopard upgrade

My local copy of SugarCRM CE 4.5.1 was working in Tiger before I upgraded to Leopard last week.
After the upgrade, SugarCRM complains with the following message:
=====
Warning: mysqli_connect() \[function.mysqli-connect\]: (HY000/2005): Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1) in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 419
Warning: mysqli_close() expects parameter 1 to be mysqli, boolean given in /Users/orest/Sites/ruby/ruby.sugarcrm_from-backup-20080813/include/database/Mys qliManager.php on line 444
Could not connect to server localhost:/tmp/mysql.sock as root.Unknown MySQL server host 'localhost:/tmp/mysql.sock' (1)
=====
A copy of PHPMyAdmin has not had any problems during the transition from Tiger to Leopard, nor have local copies of WordPress and Drupal.
Any advice would be appreciated. I'm new to the subtleties of Apache/PHP/MySQL on Leopard, so please be gentle.
Thanks.

Thanks for the swift response.
I'm familiar with the socket location issues with MySQL on Mac OS X. My local copies of WordPress and PHPMyAdmin both work with their configurations pointing to the socket at /tmp/mysql.sock. These installations were working, along with SugarCRM, before the Leopard upgrade. Only SugarCRM has stopped working after the upgrade.
Is there something I misunderstand about your pointer?
- O.

Beep app stopped making sound after upgrade to 2.6.22 kernel

hi, beep app stopped making sound after upgrade to 2.6.22 kernel Jul 29 2007; my PC still beeps on reboot; i searched for the beep package at arch home page and found
the beep package maintainer's name: Damir Perisa how do i contact him if there are no other fixes for beep no longer making any sound? thanks in advance for your quick
response; resident, a happy arch user

Check if the PC speaker kernel module is present:
lsmod | grep pcspkr
If that returns nothing, then check /etc/rc.conf for these line:
MOD_BLACKLIST=(foo)
MODULES=(bar pcspkr)
MOD_BLACKLIST must NOT contain pcspkr, while adding it to MODULES should autoload it on boot.
If you want it to load right now, then just enter:
modprobe pcspkr

How can i stop upgrade in progress

upgrading to IOS 6 on Iphone, is there a way to stop the upgrade? seems to be stuck, over an hour and half so far.....

Additionally, take a look at this recent discussion:
https://discussions.apple.com/message/20628526#20628526

Library Upgrade in Progress...

I upgraded from Beta 4 to LR 1 and was not really intimidated when LR told me that this might take "a few minutes".
Twelve hours later, with LR using up 2/3 of my RAM and up to 98 of my CPU, I stopped this via the task manager.
I then rebooted my PC and tried to open Lightroom again. Now "Library upgrade is in progress" again...
This was about 8 hours ago.
Admittedly, the photographs indexed (many are high resolution scans of slides) take about a terabyte disk storage, but the database itself should be much smaller.
Anything, I can do to speed up the process?
Or will the new lightroom just not run on my system?
Laurenz

OK, I just returned to my PC after a good night's sleep.
Library Upgrade is still "in Progress", about 1 % of the progress bar is blue.
To me this looks as though LR was really having a problem with the library Beta 4 created.
If there is no other way then re-importing everything, I'd even do that, but there's no way I could do anything like this from within the application (as it won't open).
Is there anyway, I could do this from outside?
One thing: I did not install Lightroom at the default location - I have a special drive for all programmes and used the option to install it there.
Worked fine with beta 4 - might this be part of the problem, or is it just the number of pictures referenced?

AS 70SR2 (WP's) stops when connecting to upgraded system.

Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        S23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    179
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ; 1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01                      <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ; 12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ; 1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ; 15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     1680 Ended         no      2   0        0
1 DIA     2152 Ended         no      1   0        0
2 DIA      720 Ended         no      2   0        0
3 DIA     2556 Ended         no      1   0        0
4 DIA     2212 Ended         no      2   0        0
5 DIA     1908 Ended         no      2   0        0
6 BTC     1136 Ended         no      2   0        0
7 BTC     1284 Ended         no      1   0        0
8 BTC      888 Ended         no      2   0        0
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
| Typ |    now |   high |    max | writes | reads |
--------++++--
+
| NOWP |      0 |      2 |   2000 |     11 |     11 |
--------++++--
+
| DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--
+
| UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events       total    11, udp     9 ( 81%), shm     2 ( 18%)
since last update total    11, udp     9 ( 81%), shm     2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
|   id | owner        |   pid    | eyecatcher |
--------++--
+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2812 HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2812 HANDLE:512)
wait for end of icman
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2764 HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01                      <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ; 12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ; 10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Oct 03 12:40:02 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B New connection 0 created
M sysno      01
M sid        S23
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    179
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        1680
M
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ; 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11024 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M DpShMCreate: allocated sys_adm at 000000000F7B0050
M DpShMCreate: allocated wp_adm at 000000000F7B1C90
M DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M DpShMCreate: allocated tm_adm at 000000000F7B4800
M DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M DpShMCreate: allocated comm_adm at 000000000FCC4670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M DpShMCreate: allocated gw_adm at 000000000FD4B370
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000FD4B3A0
M DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Fri Oct 03 12:40:03 2008
M ThInit: running on host dksnss23ap3
M calling db_connect ...
C Prepending D:\usr\sap\S23\D01\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ; 438]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App       : disp+work.EXE (pid=1680)
When      : 10/3/2008 12:40:3.953
Threads   : 2
Computer Name       : DKSNSS23AP3
User Name           : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Fri Oct 03 12:40:04 2008
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M    pid = 1680
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Fri Oct 03 12:40:04 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10754
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ; 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ; 333]
M return from clean-up function ...

You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan

Stop ACS 5.0 upgrade in progress

Similar Messages

Maybe you are looking for