Stop adding that I play into the library

Hi there,
When I browse the net, it seems that I'm the only one with this request ... but all my friends want to too ... any way .. here is my request:
I don't want to let iTunes *add anything that I play* (with iTunes) in my library!
It's impossible to have a clean library with that!
I don't know the best solution ... have a complete rescan at every start or on demand, or a question "would you add this into your library", or ... don't know
Thanks for all
Regards

Ok .. thanks you for all your answers!
I'll close this thread with just a little conclusion:
When I listen tunes that are not directly buyed on iTunes, +by default+ iTunes open them. If I listen 6 versions of a tune, and add only one to the library, so all of them will be in the library (I've listened to them) ...
And it's the same with radios (not them given by apple) since iTunes open them too by default.
by the way, someone knows how to make Quicktime the default player for radios? (.pls)
Thanks again, and excuse my english
Yannick

Similar Messages

I recently bought a new laptop, installed iTunes and imported my library during a sync with my iPhone. Now I've noticed that any tracks that were ripped into my library from a CD won't play on my iPhone. They're visible but with a red circle next to them.

I recently bought a new laptop, installed iTunes and imported my library during a sync with my iPhone. Now I've noticed that any tracks that were ripped into my library from a CD won't play on my iPhone. They're visible but with a red circle next to them.

Hi, BartleyBauer.
If the media that you are attempting to sync plays in iTunes, try removing the preference to sync music as this remove the media from the device. Once this is done, try syncing the media again.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Cheers,
Jason H.

Adding HTML into the library in 'Code' view

Adding an object into the Library from ‘Design’ view works as advertized… however I’m looking to add HTML into the Library that is not ‘seen’ in ‘Design’ view… for example… some of the META tag data in the Header section.
In my reading… I have come across references that this can be accomplished…but I’m being frustrated by the fact that while in ‘Code’ view the MODIFY/LIBRARY/ADD OBJECT TO LIBRARY…. The “Add object to library” is grayed out.
I’m about down to thoughts like “you can’t get there from here”… or … “you ain’t smart enough to figure out how to do it”.
Is this ‘doable’?... and if so… what are the proper sequence of steps.
Many thanks for any and all inputs..

Btw Nancy… just as a heads-up, to save the next guy a bit of frustrations…
…the pointer you provided is no longer working:
Guidance on when to use DW Templates, Library Items and SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
Thanks again for the help… I’m off and running in other areas…
(...why did a vision of Don Quixote and windmills just spring into my mind??)
Best regards,
zippes

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.

Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software!

My ipod has 760 songs on it. I had to reload my computer that contained itunes. The new installation of itunes won't allow me to copy the songs into the library. What can I do?

My ipod has 760 songs on it. I had to reload my computer that contained itunes. The new installation of itunes won't allow me to copy the songs into the library. What can I do?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

TS1424 Hi. I just added $25 gift card into the redeem in the app store and purchased four different apps for $4.99 each. I was planning on purchasing one more app at $4.99, but showed that I do not have the $5.00 in my redeem. Instead I have only $4.80?!?

Hi. I just added $25 gift card into the redeem in the app store and purchased four different apps for $4.99 each. I was planning on purchasing one more app at $4.99, but showed that I do not have the $5.00 in my redeem. Instead I have only $4.80?!?!?!?
Is there taxes that's going on here?
I feel jipped!

There will indeed be taxes, assuming you are in an area where sales tax is normally charged.

When I go to add songs from my iTunes library it shows that it went into the iPod but when I look on my iPod the song is not there?

When I go to add songs from my iTunes library it shows that it went into the iPod but when I look on my iPod the song is not there?

Sorry! Figured it out. Just took awhile to load.

I had previously purchased 56 songs, over a year ago. Tonight I purchased 22 more. It seems that I am being charged for all 78 that are currently in the library. How can this be stopped?

I had previously purchased 56 songs, over a year ago. Tonight I purchased 22 more. It seems that I am being charged for all 78 that are currently in the library. How can this be stopped?

I doubt that this is happening. Why do you think that you are being charged for all 78?
Did you buy them again?
You only buy one download, so if you downloaded them again you would have to pay again.

Can't get songs from my iPod into the library on my new mac

I recently had to get a new hard-drive on my dell laptop, and iTunes was uninstalled from the computer. When I re-installed iTunes, my iPod was not being recognized by the laptop, so none of my songs on my iPod were in the library anymore.
Now I have a new MacBook, and my iPod is being recognized, but I can't get most of my songs from my iPod into the library in iTunes.
I'm sure there is an easy solution, but I can't figure it out!
Any help is much appreciated!!!

If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

How do I get iTunes to accept FLAC files into the library?

If I want to use iTunes to catalog FLAC files (but NOT play them...as I use my logitech Squeezebox fior that) how do I get iTunes to accept FLAC files into the library?

As polydorus notes, iTunes has the huge shortcoming of not handling FLAC.
There are plugins that allow iTunes to play FLAC, but everything I've seen says they are problematic.
A much better approach is to get a 3rd party conversion program such as Switch and convert the FLAC files to an iTunes-compatible format such as AAC or AIFF.
Put the converted files in your iTunes library, and keep the original FLACs on hand for when you are using a more capable player.

Tone that is played at the completion of an import operation.

Does anyone know how to eliminate the playing of the three note tone that is generated at the completion of importing or ripping a CD into the library?

You are correct that there are no system variables for this. If you know how long the animation plays, you can place a message caption on the timeline that becomes visible at the point where the animation would cease.
However, I have to also inform you that nesting Captivate SWF animations INSIDE other Captivate SWFs is NOT a good idea. You may run into lots of issues doing this. If the animations are the same dimensions as the shell project, you would be far better advised to add the slides from the animation into the main project and include the content that way. This approach also gives you greater control over the navigation issue you are asking about here since it becomes much easier to detect when that part of the content has finished. You can pick up on an On Slide Enter or On Slide Exit event.

How can I sync my ipod shuffle so that it plays in the same order as my playlist?

How can I sync my ipod shuffle (4th generation) so that it plays in the same order as my playlist?

Is the playlist in your iTunes library, or is it already on the shuffle (as a playlist)?
If you created one or more playlists for your shuffle in your iTunes library (with the songs in the desired playlist order), you should set up automatic syncing. Here's how to do that, if you have not already...
NOTE: If the iTunes sidebar (along left side of window) is not visible, from the menu bar, under View, select Show Sidebar.
Select the shuffle in the sidebar, under DEVICES. Near the top of the window, there is a bar of buttons, starting with Summary. Click Music next to Summary. This is the shuffle's Music screen, where you tell iTunes how to sync songs. (Sorry if you know this already...)
Check the box for Sync Music. Below that, choose the option to sync Selected playlists, artists, albums, and genres. In your case, find and checkmark those playlists you want under Playlists. When you click Apply, the songs on those playlists and the playlists sync to the shuffle.
When using your shuffle, the default playlist that you are using is the All Songs list. To play songs in order, the shuffle's power switch needs to be set to the play-in-order (middle) position. However, if you are playing from the All Songs list, the songs play in alphabetical order.
To play from a particular playlist that is on the shuffle, you need to use VoiceOver to switch to that playlist. This document explains how to set up and use VoiceOver on a shuffle
http://support.apple.com/kb/HT4322
When playing from a particular playlist, with the power switch set to play-in-order, the songs play in playlist order.

Cannot import a .mov file into the library

I am trying to import a .mov file into my library so I can
create a .fla file. Every time I try to import it into the library
using the import wizard, it starts the importing process and always
quits not quite two minutes into the process. It then returns me to
the front page of the import wizard. I have done this before with
absolutely no problems.
The one thing that I am wondering about is the size of this
particular .mov file. It is 377MB. Do you think this may be part of
my problem? Thank you in advance for anyone's input or
suggestions!

Jeremy Williams wrote:
> I am trying to import a .mov file into my library so I
can create a .fla file.
> Every time I try to import it into the library using the
import wizard, it
> starts the importing process and always quits not quite
two minutes into the
> process. It then returns me to the front page of the
import wizard. I have
> done this before with absolutely no problems.
>
> The one thing that I am wondering about is the size of
this particular .mov
> file. It is 377MB. Do you think this may be part of my
problem? Thank you in
> advance for anyone's input or suggestions!
I would consider 10mb to be too big for a flash file. Even if
it was CD
I would load it dynamically to avoid performance problem.
377mb is out of the question way beyond flash ability to
maintain stable
performance, not just the final output but the IDE itself.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

In trying to transfer iWeb pages (not uploaded) to another computer I went into the Library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. On opening the domain all I can recover is the many component parts, and when unzipped the code. Help! Mike

Code in a domain file - really? That is not possible because the domain.sites file does not contain any html or css code at all - the domain file is your iWeb data file and you won't see any code until you publish your website.
If you can see html code, then you have the wrong file and it is a published version of your site which iWeb can do nothing with - iWeb has no import facility so cannot open any html files.
Go back and ensure that you have the correct domain.sites files that can be found under your User Library/Application Support/iWeb/domain.sites and if you have Mavericks then you need to go to Go and press the alt key to reveal your hidden User Library, so that you can then get to Application Support and then iWeb and then your domain.sites file.
You will also need to go and download either DomainCracker or iWebSwitch which allows you to open individual domain files under Mavericks, because from Lion onwards, you cannot open individual domain files.
Also, it says that you are still using iWeb 08? If this is so, you'll either need to upgrade to iWeb 09 by going to Amazon and purchasing the iLife 09 or 11 boxed set, both of which contain iWeb 09 or you need to switch to newer software that is actively being supported and developed such as EverWeb (http://www.everwebapp.com).

IPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17)

iPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17). Error message is "File format not recognized". Before that, no problem. Had them first on SD-card over USB, tried then to copy to the HD (Desktop) and import from there, but didn't work. Imported successfully into iMovie and exported as .mp4, but even this is not recognized.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Stop adding that I play into the library

Similar Messages

Maybe you are looking for