STOP and SCHEDULE process chains

Hi
i have an already scheduled procces chain (a group actualy... it's a process chain with 2 processes inside) that i want to stop. How do i stop it or remove it from schedule?
then i want to schedule an other one. in this new one i want to put 2 processes inside. how do i do that?
i've serched in rspc transaction, but i'm not sure of what steps to make and i don't wwant to make any mistake
best regards
ricardo

Hi ,
Kindly Follow the below steps:-
1) Go To RSPC
2) Go to the particular Chain which you want to Deschedule
3) Click on the Start Variant of your chain and check the Menu Bar , there will be one menu as "EXECUTION"
Inside that dr will be option"REMOVE FROM SCHEDULE"
4) This will remove from Schedule.
5) For scheduling again You have to go to Start Variant again -> rt Click-> Display Variant.
6) Give the Timings when YOu want to schedule and save .After that Click on Schedule in the same menu "EXECUTION"
reagrds,
Amit Kumar trivedi

Similar Messages

Modifiying, Transporting and Scheduling Process Chain

Hello ALL,
i have to create a new process chain for a delta Load and put this process chain in a big existing Meta Chain, after i have to transport to Quality System.
if i control the difference between Dev and Quality system to have an idea i see that the Infopackages in Dev have the execution tab: Load Data Immediately without job: BI_BTCH
in Quality some Infopackages have execution tab: run successively in batch with job like this:
BI_BTCH LX6CW08S1ICM04I4O06KOPL
can you tell me please in detail how should i complete this activity:
- wich type of control should i do before creating and modifiying process chain in DEV and Quality
- how should i do to control in Quality the scheduling of a process chain
- if i modify a process chain in DEV and after i will transport in Quality what will be the affect in Scheduling, the scheduling will be the same without problem or i have to schedule again
- in generale how can i schedule a process chain, wich transaction and how in detail
Thanks a lot for your help
Bilal

Hi Bilal,
1) EVENT: When you want to have a process chain 'A' to be started after completion of a process chain 'B' or any process in process chain 'B' we can use this event. These two chains can also be from different BI systems. Like Chain 'A' could be from one production system and Chain 'B' could be from different production system. As soon as the chain A finished an event will be triggered and this event will trigger the chain B. The start time of chain B might differ because it depends on the completion of chain A. To schedule a process chain using an event, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after event," give the event name in the slot and select the periodic job.
2) RUN JOB PERIODICALLY: When you want to have the chain run for more than once periodically we select this option. Suppose, chain B has to run after completion of chain A periodically we have to use this option. If you do not check this option, your chain B will run only once when the event is triggered after completion of Chain A. From the next time onwards, it not run even the event is triggered.
3) JOB: For every process when it runs a job will be created assainging it to a work process in the system. Similarly, when the chain starts a job will be created containing the log of the run. Also, in the scheduling options of a process chain, you can have your process chain started after completion of a particular job in the system (ex: an attribute change). For this, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after job" give the job name in the slot and save the settings.
4) SCHEDULING PROCESS CHAIN: Means to make settings to a process chain so that it will run on a periodic basis at a certain time. If you want to start a chain immediately, you will choose the option immediately and trigger it. It will run for only once. But, if you want to have your chain run everyday at 7:00 am in the morning, you have to schedule it using the scheduling options as below:
In Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections." Click on Date/Time button. Give the start date and time in the Scheduled Start slots. (Ex: 09-04-2009, 7:00, to have the chain run at 7:00 everyday starting from tomorrow). Tick the check box Periodic job in the bottom and click on "periodic values" button and select the option as daily and save it. Then click on "Restrictions" button to specify the factory calander. The Tcode for calander is SCAL, where you can see all the factory calanders in the system and you can choose that suits your requirement. Save the changes and navigate back to process chain maintaince screen and click on "Schedule" button.
Now your chain is automated for trigger

Scheduling process chain in 1st and last of the month

Hello ,
Can some one help in scheduling the process chain at the starting of the month and the end of the month ?
The chain has to start on 1 st and 28th of every month.
Help me with the informations please!
Points will be assigned!
Thanks in Advance
Ram!

Have your process chain to start "After event". Then create an ABAP program to call function module BP_EVENT_RAISE. There are numerous postings in this forum on how to do this.
Next create two monthly jobs (one scheduled on the 1st and the other on the 28th) using SM36, and the only step in the job is to call the program to trigger (raise) the event. By triggering the event, your process chain will execute.
Check these links:
Re: scheduling process chain 3 specific times a day

How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

UNCAUGHT_EXCEPTION with msg CX_RSR_X_MESSAG while scheduling Process chain

Hi Gurus,
We are facing a short dump while scheduling process chains, as follows:
 
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
 
Error analysis
 An exception occurred which is explained in detail below.
 The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
 and
 therefore caused a runtime error.
 The reason for the exception is:
 No text available for this exception
 
Information on where terminated
 Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
 The main program was "RSPC_MAINTAIN_SINGLE ".
 In the source code you have the termination point in line 82
 of the (Include) program "LRRMSU13".
 
We tried to schedule it as a remote process chain from some other system it cancelled the job there with an ERROR_MESSAGE. We checked the RFC Connections at the source system side but it is working properly. We then tried to schedule the chain manually, we had this exception. Then we tried to have a look at previous logs of the process chain. It had this exception. We tried to reactivate the chain it was successful but when tried to schedule the chain same issue again. We tried to run the Meta chains under the same chain separately. They too gave us the same exception.
Please help.
Regards,
Sourabh Deo

S Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

Scheduling Process chains

I want to stop the scheduling of the process chains for two days in a week.
Presently the chains are running daily and i need to stop the loading for two days in a week.

Hi Manu,
First, Please go to Transaction SCAL.
Decide the calendar according to your requirement.
Then Schedule your according to that calendar.
Regards
Hemant Khemani

Scheduling process chain once every fiscal period (4/4/5)

I'd like to schedule a process chain to run on the second day of each fiscal period. Our fiscal periods are 4 weeks/4 weeks/5 weeks, so specifying a period of 4 weeks wouldn't work. Any ideas?
Jason

Hi,
A crude way of doing this would be add an ABAP program as the first step which will check whether it is the second day of a new fiscal period or not.
You can schedule this program as the first step of your process (I assume you can add an ABAP program as a step), and only if it is successful you shall proceed with the rest of the process chain.
You can then schedule it every second day of every week, so it will run the process chanin completely only as required (in start of fiscal periods) and stop at first step in all other weeks.
Not very elegant, but may do the job.
Or an ABAP program can call your process chain. This program can be scheduled everyweek. In its logic it will check for the date-validity logic before it proceeds with triggering the process chain. This will also work as well.
I am not very familiar with process chains so what is mentioned above may not entirely be applicable for them (It will work in standard R/3 jobs I know).
hope this helps,
cheers,
Ajay
Message was edited by: Ajay Das

Error in scheduling Process Chain.

Hi Experts,
I am creating process chains, but at the time of scheduling it is giving folloeing massage.
Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE.
System response
Scheduling terminated with return code 8. The meanings of the return codes are as follows:
SY-SUBRC = 4:
Scheduling terminated by user
SY-SUBRC = 8:
Error when scheduling job (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
But I have Authorisation for scheduling Back ground jobs.
Please Help me,
Thanks in advance,
Raghav.

Hi........
This problem is already discussed in SDN........Search in Forum......
Check SAP Note : 947690 for error RSPC065
and SAP Note : 511475
Also check the solution of Roberto Negro .......
/message/685875#685875 [original link is broken]
Hope this helps......
Regards,
Debjani.......

How to schedule Process Chain with Full Update for the past closed month

Hello,
I have an HR-BN benefits transactional data extractor - http://help.sap.com/saphelp_nw70/helpdata/en/08/b01d3cf8aa101ce10000000a11405a/frameset.htm
One of the selection fields for that extractor is calendar year/month 0CALMONTH and it is a full update extractor.
SAP recommends running this extractor once a month after the month has been closed.
If I were to include this update/extract into my process chain, would it be possible to automate the process in a way where the process chain is scheduled to execute once a month (I know how to do that), but that also only pulls values for the past/closed CALMONTH (as if it had a variable value of which would be automatically set to the last closed month when pchain is run)? As I mentioned 0CALMONTH is one of the selection criterias in the infopackage for that extractor.
let me know how I might be able to do that.
P.S. we are on BI 7.0/2004s
Thank you

For Calmonth selection in infopackage you can use the SAP-Exit OLAP Variable 0CMLMON (Last Month)
select Type "7" ("OLAP Variable")
and in Details of Type screen, Select OLAP Variable "0CMLMON" Which is SAP-Exit variable for Calmonth, that returns the last month from the current system-date.
If variable 0CMLMON is not active, you need to activate it from Business content.
Assign pts if helpful.

How to stop a triggered process chain

Hi,
Does anyone know how to stop a process chain? It was accidentally triggered twice and we need to stop it. Thanks.

Hi,
There r 2 ways to kill the job.
One is using transation RSMO locate the job and display the status tab double click on the yellow light that is shown on the line total, a pop will come 'set overall status ' is displayed select the desired status that is red and save it. Then return to the monitor page and select the header tab double ckick on the data target right click and then goto 'manage',there should be request sitting there probably with yellow lights , highlight the line with the faulty request click the delete button then click refresh button.
Second is goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
hope it is clear.
Regards-
Siddhu

How to check the scheduled process chain in SM37

Hi Experts,
Can anyone tell me how do I check whether my process chain has been scheduled or not.
I checked in sm37 all the jobs that are under released status. Im getting about 10 jobs.
I dont know which one is belogs to my process chain as they do not have the process chain names.
Can anyone please let me know how do I confirm whether one of the released jobs below to my process chain.
Thanks in advance.

Hi,
To find this out, in sm37, select the job and click on step button in toolbar. You would find the program name RSPROCESS.
Click on this job and then go to menu bar and select goto-> variant.
In the variant, you can see the process chain that has been used for this job.

Scheduling Process Chains through Jobs

Hi All,
I have a question regarding scheduling of process chains using Jobs created in SM36.
In our project we are not using Meta Chains to run the individual Process Chains.
Instead jobs have been created for each chain and the jobs are scheduled one after another and dependencies are maintained (e.g. Job A depends on Job B)
However, on scheduling, we find that even before Job B completes Job A gets triggered and both the Process Chains start running in parallel instead of waiting for the completion of the first Chain.
Any solution for this ??
Thanks
Sam

Hi,
I can suggest one method using Events...
Start
 |
 Load-Cube A
 |
 After Success raise Event (This is Event Program, you need to insert)
After Event the dependent Process Chain will trigger
Start
 |
 Load-Cube B
 |
 After Success raise Event (This is Event Program, you need to insert) -->If you need
Create Events in SM64 and use in below Program..see the sample code.
REPORT ZE_SIT_RP.
DATA: EVENTID LIKE TBTCJOB-EVENTID.
DATA: EVENTPARM LIKE TBTCJOB-EVENTPARM.
EVENTID = 'ZE_SIT'.
EVENTPARM = 'ZEP_SIT'.
CALL FUNCTION 'RSSM_EVENT_RAISE'
EXPORTING
 I_EVENTID = EVENTID
 I_EVENTPARM = EVENTPARM
* EXCEPTIONS
* BAD_EVENTID = 1
* EVENTID_DOES_NOT_EXIST = 2
* EVENTID_MISSING = 3
* RAISE_FAILED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Reddy

Reg: Excluding one day from the daily schedule process chain

Hi All,
I have a process chain scheduled daily except Sunday i.e. from Monday to Saturday. Now i want to exclude Saturday from the daily scheduling.
Any idea how we can do that. Early response will be highly appreciated.
Best regards

Hi,
Restrict chain Scheduling on Sundays/Holidays
Create a factory calender using TCode SCAL or ask your basis team to create one.
In this calender mark all days except the day you dont want the chain to run as workday.
Now while scheduling the process chain make use of this calender and restrict it to run only on the workdays.
There is a setting in the start process of the PC by which your chain wont run in sundays/holidays based on calendar or run only on workdays as defined in the factory calendar.
Go to PC > start process > change selection > Date/time. Here enter the date from which the chain should be scheduled and then click the Restrictions button at the bottom. There u can check the option "Dont execute job on sundays or holidays.
Hope this helps.
Thanks,
JituK

Scheduling Process Chains (events)

Hi
I have created a process chain which i intend to activate through a event. This is what i have done.
1) Created an event in Transaction SM62
2) In the process chain i have set the start process to start when the event occurs.
3) I trigger the event using SM64
4) Nothing happens!!!
I i schedule the process chain to start immidiatly and run it directly it works perfectly.
Do i miss setting something up or has everyone a solution?
Chris

Hi Chris,
the requested functionality has now been made much easier by making use of a new feature set of NetWeaver: Job Scheduling Capabilities of SAP NetWeaver. You can find more information on this topic at http://service.sap.com/job-scheduling
Kind regards,
Edwin Esser

STOP and SCHEDULE process chains

Similar Messages

Maybe you are looking for