Stop and Start sounds

Good morning All,
I have a Flash presentation that has some music and various sounds throughout the presentation.
I want to have a btn stop all the sounds, but if clicked again it will enable all the sounds again.
Is this possible? I can get the btn to stop the sounds, but cannot get the music to enable after.
Any help is greatly appreciated,
Cheers-
Graeme

if you're using stopAllSounds(), all sounds are enabled after that executes.  they won't restart but they're enabled.
if you want to re-start all stopped sounds, you'll need to explicitly do that for each sound instance.

Similar Messages

  • My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    Do you have current backups?
    Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
    I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
    Your appointment for an evaluation is FREE, in warranty or out.

  • Sound randomly stops and starts

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

  • Apple TV problem- Netflix message not availabale at present etc.  On Itunes playing a movie the sound stops and starts how can the downloading hurry up.  On the computer all OK.

    Netflix keeps posting not available- have restarted it as directed but still a problem.  Itunes movies dont download fast enough and stop and start. On the Imac computer no problem with sound or viewing.

    What is your current connection using speedtest.net
    I would check for interference using istumbler
    Make sure DNS is set correctly on ATV (settings - general - network - configure DNS - automatic)

  • Sound stops and starts with x-fi titanium pci e

    I am going nuts with this problem and creative support is not much help atm, so I have been troubleshooting myself. Whats going on is my sound stops, starts, and stutters a lot. It is pretty bad when I play music files but it is absolutely horrible when I watch videos like on CNN or YOU TUBE. It is like a old vinyl record skipping, except when this gets off a stutter, it races to where it should be on the time line. Also my creative console does not work right. I cannot use the equalizer, as the custom, rock, pop music select is greyed out and the box is checked to use the equlaizer. It also disappears when I click on a few tabs, like between speakers, bass, equalizer..then its just gone and I have to click the shortcut again to get it back.
    What I have done so far is un-install everything, and do a clean boot, then re-install and I have the same problems. Though I downloaded the creative console beta(2.6.49) and it seemed to have fixed my issues with that. But downloading the new drivers (2.7.8) does not fix the stopping and starting.
    Any suggestions?
    I should mention I use klipsitch speakers..2.1, I don't have surround sound anymore.
    Customer service had me run a registry cleaner and use it to uninstall everything creative. I used CCleaner, then used direct links to download drivers...again...(2.7.8) and a creative console(2.6.35)..guess what? It didn't work, same problems, though I downloaded and re-installed the beta for the creative console(2.6.49) and now it works fine. I also did all this under a clean boot..again.

    Check if "Play Stereo Mix using Digital Output" is checked in the Console launcher in Settings/Digital IO.

  • How to stop and start MDBs to listen for JMS messages

    Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
    For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
    The arhitecture we used was something like this :
    1.Client sends a persistent message to a queue. (order)
    2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
    This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
    The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
    The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
    When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
    Now.. Why am I telling this story..
    I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
    I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
    I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
    I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
    Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
    Best regards
    Hans-Jacob Melby

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

  • Why does the video stop and start using airplay on Mountain Lion?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

  • How do I get u-tube videos to run smoothly.  They stop and start and jump.

    How do I get u-tube videos to run smoothly.  They stop and start and jump.

    Sounds like they are buffering because your internet speed is way to slow.
    To check your internet speed, go to: > Speakeasy Speed Test
    or > Speedtest.net - The Global Broadband Speed Test
    Plus you can also check your internet speed using the Activity Monitor, which is in your Utilities Folder.

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Music stopping and starting

    I listen to music via Match daily.  Beginning last month I've been experiencing music stopping and starting, big gaps between tracks, and clunky behavior in general.  It's comes and goes but over the last week it's been terrible.  Is anyone experiencing this?  I have tried re-initializing match on my iPhone but it doesn't seem to work.

    salam alykum
    kindly goto settings---Music--- Shake to Shuffle = OFF
    Sound Check = OFF

  • Every time I open Mozilla Firefox, there is an annoying sound that won't stop, and it sounds kind of like pac man. I t won't stop, and I have no idea where it is coming from. I have tried everything. Any suggestions on what I should do?

    Every time I open Mozilla Firefox, there is an annoying sound that won't stop, and it sounds kind of like pac man. I t won't stop, and I have no idea where it is coming from. I have tried everything. Any suggestions on what I should do?
    == This happened ==
    Every time Firefox opened
    == I opened firefox today, and it won't stop.

    It's just the Google homepage tribute to Pacman turning 30 today. A playable game starts up automatically, use the arrow keys to move Pacman. It's fun!
    You can get Ms Pacman to appear in that game by clicking the "insert coin" button twice and using the WASD keys to move :)
    You can also just change your homepage to something other than google until tomorrow.

  • Waveburner resets (64bit) IK Multimedia plugins when stopping and starting

    Does anyone else happen to have this problem:
    I'm finding that while mastering, I want to look back at the incremental changes made and have found that the Pultec EQ and some other plugins seem to default to a preset.
    In order to get to this problem I did the following:
    1 track in Waveburner, added the Pultec EQ,
    2 added a limiter chose a preset 'MIX PRESENCE' then got my desired sound.
    3 When listening everything seems fine and then you stop and start again, or go back to the beginning of the track by pressing the 'BACK ONE TRACK' button on the transport and all of the sudden the Pultec EQ resets to that original preset.
    So not too sure what to do, the only way of getting round this issue was to mix as best as I could, save as a new preset while it was playing and then when hitting start again then while it is playing then I quickly hit the preset on that I made and have to bounce my mix at the same time in order to finally get my desired output which is less than okay.
    Can anybody help. I'm running on an iMac, 64bit Version10.6.7 OS and Waveburner is 1.6.1
    Many thanks

    It is not just IK Multimedia and Waves plugs that are resetting on me; it is also the WaveBurner 'native' plug "Linear Phase EQ" and who knows how many others, were I to begin testing instead of trying to work through this.
    This little bug renders this software effectively useless for professional work.
    Some of my Waves plugs hold their values, others don't.
    Elysia products screwed up too; so much for that demo.
    As far as I can tell I am not using any automation, but, is there a way to globally turn off the possibility of automation (I tried RightClicking in the mix lane but there is no choice of automation available there, perhaps 'cause there is none as I suspect)?
    I am using WaveBurner 1.6.1.
    C'mon Apple, its November already; you must fix this.

  • Order of stop and start of reporting services

    Hi All,
    I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
    Thanks
    Hypuser

    The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Music skips and stops and starts

    Hello, we have just got a nano to replace a 3rd gen iPod.
    I have around 50 gigs of music on a lacie USB drive, and the music plays flawlessly from here in iTunes.
    However once imported into the nano, there is distortion, jumps and clicks in the music and sometimes the song will just stop and start from the beginning.
    Any ideas?

    Gary,
    You chould check out this thread we have going.
    http://discussions.apple.com/thread.jspa?threadID=356911&tstart=0
    Toshiba Satellite P25-609   Windows XP Pro   Media Center Edition iPod Nano 2G (as black as my cold, dead heart)

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    /Library/LaunchDaemons/local.postfix.stop.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.stop</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>stop</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
    .com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>Label</key>
      <string>local.postfix.start</string>
      <key>ProgramArguments</key>
      <array>
        <string>/usr/sbin/serveradmin</string>
        <string>start</string>
        <string>mail</string>
      </array>
      <key>StartCalendarInterval</key>
      <dict>
        <key>Hour</key>
        <integer>4</integer>
        <key>Minute</key>
        <integer>00</integer>
      </dict>
    </dict>
    </plist>
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

Maybe you are looking for