Stop and then start Listener from OEM

Hi,
I am new to Oracle. I notice after stopping listener using OEM on Windows XP, the TNSLNR.exe is terminated as I expected. At that point, all connections include OEM, iSQL*PLUS and SQL*PLUS should close connection.
If this is right, how can one start listener from OEM? One needs listener work before using OEM to config something else. What is the purpose of Start button for listener on OEM? Even more perplexing me is that iSQL*PLUS is still works! Does iSQL*PLUS not use listener for connection?
Your help will be appreciated,
-Hong

Hi
i think its not possible to start the listener from oem, because the oem use the listener to communicate to the db.
Regards
Mirko

Similar Messages

Can't start listener from OEM. It appears as Stopped although it is not.

Hi,
I can't make the EM show the listener as running, it always shows it as stopped. I checked it with lsnrctl and it is running, but in EM appears as stopped. I refreshed the screen and nothing; I tried to start it from the EM, and it displays a message like "The listener has been correctly started", but when I check the status in EM it is still stopped. And when I check the details, it shows an error "Access denied", NET_ADMIN_ERROR,REMOTE_OP_ERROR,No such file or directory. I think I have the right credentials (I'm in the administrators group, and I have log on as batch job)
I would appreciate any help on this.
Thanks a lot
Ricardo

Hi Nicolas- here's the SQLNet and listener file:
-----------------LISTENER
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
jon =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
-----------------SQLNET
# sqlnet.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
#SQLNET.AUTHENTICATION_SERVICES= (NTS)
#NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I can't see any excess protocols in the listener. As per some metalink entries - I've commented out the "SQLNET.AUTHENTICATION_SERVICES= (NTS)" line from the SQLNet file.
Still the same problem.
To be honest - all replies to postings for this error have not worked. I've contacted some guys with the same problem - and their resolution was to completely reinstall XP and then Oracle again. Just removing and reinstall Oracle was insufficient. So - i guess i'm going to have to follow suit.
Any last minute suggestions before this bit of drastic action?!

Re: motion paths, can they stop and then start again later?

Hello
Motion paths are working well but ... I now want to do the following: I ahve moved an object on the screen ...can I delay for a few seconsd and move it back OFF the screen? (or to a different location ON the screen)
Thanks in advance
bob leonard- Detroit

the answer is YES. I figured it out. I found it easier if I defined ALL the motions upfront.

When I stop listening, and then start again, it goes all the way to the beginning.Why?

When I am listening to my ipod shuffle on in order, and then stop, and then go back, its starts from the very beginning. Why?

Yes I can and here it is as you can see its like on another screen on my desktop and I can't get to it.

Mac keeper came on safari and I accidently started to install it. Then I stopped and deleted Mac keeper from my downloads. Must I do anything else to protect my desktop?

Mac keeper appeared suddenly while surfing on Safari, and I accidently started to download it. I stopped and then deleted Mac keeper from my downloads when I realized it was bogus. Please help. Do I need to take any special precautions?

If you didn't install it, that's all you need to do.

TS3297 I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

If a server supports resuming downloads then the download should continue where it left off.<br />
You can test that by simple starting a large download and wait a minute or so before pausing it.<br />
Then you can close and restart Firefox and see if resuming works.
You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior

TS3682 I started updating my iPhone 4, but it went black screan and then started turning on and off non stop. I tried to hold the two buttons, but nothing different happened. Please, help! What should I do?!

I started updating my iPhone 4, but it went black screan and then started turning on and off non stop. I tried to hold the two buttons, but nothing different happened. Please, help! What should I do?!

First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

Is it possible to wipe out iMac with ML upgrade and THEN reinstall SL from disk, back up with TM?

Iv'e been going round and round with my iMac ever since Genius bar employees "upgraded" me to ML while replacing Seagate HD per the recall. THis is a late 2009 27-inch iMac that came with SL.
What I think might solve this once and for all is to completely wipe out the hard drive and THEN reinstall SL from the disk that was shipped to me by Apple.
Here's what has happened thus far:
1. iMac was working fine, but per emails from Apple, replacing the Seagate HD that came with the computer was advised. Made appt, took it in after backing up to external hard drive.
2. Picked up the iMac first week of August. Found that they had upgraded me to ML.
3. Proceeded to put back contents of backup from July 27 (before the hard drive was replaced, all saved in SL).
4. Immediately after back up was reinstalled, realized that iPhoto contents (ALL of my saved files/photos, movies, etc, both work and personal) are inaccessible. Also, fan will not stop running (and this is true even when there is no user signed in, ie, no CPU-intensive programs running). Programs that worked in SL no longer work with ML (iWeb, etc).
5. Have been in contact with Apple numerous times, and finally got a senior tech to work with me via phone. I had a SL disk borrowed from a friend (the 27-inch was a replacement for original iMac that was defective and never received any install disks with new iMac Jan 2010). Per instructions from Apple tech, backed up iMac, then tried to reinstall with SL disk. When the progress wheel only kept spinning, he said that the disk I was using must be incompatible and I waited for a replacement SL install disk to be mailed to me.
6. Called back when I got the new SL disk, and then we tried it again. When the progress did the same thing, ie just spinning, Apple tech said that I must have a hardware problem and he instructed me to make another appoitment with the Genius bar. I did that and am supposed to take it in tonight.
7. Apple tech said it must be a hardware problem, that the super drive would not read the install disk, BUT, the super drive (actually both of them, one inside the machine, one external super drive purchased separately) has no problems reading audio CDs. It is ONLY the SL reinstall disk.
That, along with the continually running fans that have also been deemed by Apple tech to be bad hardware (which were both fine before the upgrade to ML) make me think that it is the ML software that does not work properly with this late 2009 iMac. It was designed for SL, not ML.
I suspect that if the hard drive on the iMac is completely wiped clean and SL then reinstalled with the disk that was mailed to me, this would put my machine back in order with SL as the OS.
I'd like to try that BEFORE I take this iMac back to the Apple Store. I have the back up from July (before ML was put on as the OS) and that's what I'd like to put back on. I can more easily save jpegs that were savde after ML was put on as the OS than I can save everything (one by one) that was on this iMac from Jan 2010 till July 2013.
Is there anyone who can give me a yes or no, whether this would work or not? Wipe it all out, start fresh with a new SL installation and back up from that July 2013 backup?

Yes it is. That is why you got a set of reinstal disc with your Mac. For just this purpose.
But if you have a 2009 model it might of come with Leopard. But you should still be able to use that reinstall disc or the retain Snow Leopard DVD you used to upgrade to SL to restore your Mac from a Time Machine backup.
First you need to boot the system from either the original reinstall DVD or the retail SL DVD and use Disk Utility to Repartition the drive as One Partition. you MUST do that to get rid of the Mt Lion Recovery HD partition. Once that is done there should be an option to Restaore your Mac from a TM backup. Have the backup drive connected before you start the system from the Reinstall DVD, either of them whichever you chose.

Something went wrong. To try again, reload the page and then start the workflow

We have a SP 2013 farm with Aug 2013 CU. While trying to start an SPD 2013 platform workflow from browser I get an error "Something went wrong. To try again, reload the page and then start the workflow."
I could also see the following in ULS:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean
isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials
(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|
microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll
This seems to be a bug and is solved in Mar 2013 PU but I have Aug CU. The web where I have this workflow has classic mode auth. Has anyone come across this error before?
I have checked the following:
1. Service
Bus Gateway and Service
Bus Manager Broker services are started
2. Authentication for this web application is Windows NTLM
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Thank you for the steps.
I have checked User Profile service and it is started and running fine. The user who is trying to start the workflow (me) has a profile created. I'm not starting wf as system account and my account is not added to web application user policy. Workflow isn't
even firing when I try to edit list item.
I tried to edit the list item as system account and workflow started this time. But it does to suspended state with the following message:
RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"SPRequestGuid":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"request-id":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["2"],"SPIisLatency":["1"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 24 Apr 2014 15:32:05 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
WhenI try to start wf I can see the first error:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

I didn't know that it was posted three times. My computer didn't say that it posted anything.
My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

How to have a song stop and then restart later?

Does anyone know how I can have a song stop midway through and then start up again later in the movie?
Basically, I have a song that I want to stop when it gets to a certain 30ish second clip in my movie, and then restart again once that clip is completed.

There are two ways to do this:
You can keep the audio clip going but with the volume turned down. Do this by selecting the video clip and opening the audio inspector. Then select the ducking feature and set ducking percent to zero%. When the clip is over the audio track will come back to full volume.
If you want to stop a song halfway through, wait 30 seconds, and restart the song at the same point, here is a way to do it:
Drag the song in and drop it on the clip where you want it to start. Click on the song track to select it. Click on the right edge of the song track and drag it to the left, until it stops at the point you want it to. Now drag the same song in for a second time. Drop it on the clip where you want the song to restart. Select the song track. Grab the left edge of the song track and drag it to the right until it is starting at the point where you wish to restart the song.

ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

Every few hours I receive this error message:
"iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
Is there someone who knows how this could be solved?
[Update]
I see that there is already a discussion on this issue: https://discussions.apple.com/thread/3502994?start=0&tstart=0
Message was edited by: mickniepoth

I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

# Question
I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

Is this the Firefox branded Google page? If it is, Firefox can store multiple home pages and you may have 2 home pages set. Follow the instructions to set a single home page in this link - https://support.mozilla.com/kb/How+to+set+the+home+page
If it is the Firefox has just updated page that keeps on appearing, there may be a different problem, for details on fixing that see https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

Stop and then start Listener from OEM

Similar Messages

Maybe you are looking for