Stop Automatic Connecting to RoboSource Control 3.1

I entered server url to connect to Robohelp Server using RoboSource Control 3. I also mark that it should connect to this server every time the project is started. It is the wrong URL and it does not error out or abend. I am unable to go in and unmark the automatic connect because the first thing it does it try to connect. How or where can I stop it from trying to connect to this url address?
System Attributes
    Robohelp HTML v8.02
    RoboSource Control 3.1
    Robohelp Server V8.0
    Webhelp Pro 5.50 (7.00.145)

Hi,
I use the following method for TFS when I want to temporarily disconnect a project from source control. I assume it will work the same with RoboSource Control.
Make a backup of the project.
Delete the CPD.
Open the XPJ with Notepad.
In the tags <miscproperties>, remove all the child tags (<matchedpair>).
Save.
Open Project with RoboHelp.
The projet is now disconnected. By not removing it from RH, you can disconnect a project while the files in source control are retained.
Greet,
Willam

Similar Messages

How to stop automatic connection to itune store when opening itunes?

when ever i try to open i tunes without internet connection,a warning diallog box appears saying that 'itunes cannot connect to itunes store.check internet connection'.ive tried disabling store,podcasts and everythng in itune preferences but still doesnt make any change..please help me out..please..:(

There is no issue here. If you have no Internet connection, it's impossible to access the store, therefore iTunes will alert you with this message so you don't get confused. You can use all the other offline features on iTunes, so you shouldn't be going through so much trouble to solve something which isn't a problem. There is no way to stop iTunes automatically attempting to access the store when you open iTunes, so you'll have to deal that message. If I'm not getting the issue, please tell me.

AEB (Panther) Has Stopped Automatically Connecting - Fix?

I have an iMac G4 running Panther and I use the airport extreme base station. I have given my network a specific name, and until recently I was always connected to the network automatically on restart.
Lately, I have found that every time I use the computer after it has been shut down, or after the computer has been sleeping, the network connection is off and I have to click on the airport symbol and choose the network name to reconnect. Once I do that, I am connected and I have no other network issues.
I did a preliminary search of posts looking for this topic, and it looks like the issue may be a new version of the airport software (I generally accept the automatic updates, so let's assume that I updated - I am not currently at my home computer). The solutions that I have seen posted are for people using Tiger, which I do not have and I am concerned that the Tiger solution may not be the same as the Panther solution.
Could someone please explain to me, a Panther user, how to get the automatic start for my network back? Any help would be appreciated.

That didn't do it. It started last week with my iPhone 4 and on Saturday I got a new iPhone 4s and it's doing it with the new one, as well. Just seems odd that after 3 years of the same set up, that it would suddenly make me log in to my network each time.

Email no longer automatically connects

Probably when I upgraded to 3.0, my original iPhone (and my wife's) stopped automatically connecting to email, both POP and IMAP. I have to launch the email application on my phone before it will connect and show new messages in the queue. I'm assuming that this is the price of running 3.1 on my tired old phone. Anybody else having this problem? Any suggestions?

In the signature preferences make sure that, for each account, you have selected a signature at the "choose signature" popup.
AK

Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797

How to stop Access Connections from automatically connecting to WAP at turn on or restart?

I had a problem with my X200 winxp sp3 wireless connection. I got it working OK again but in the process I did something that changed the action of Access Connections when I turn on or restart the machine where it automatically connects to the WAP whereas before it did not do this, rather it required a manual connection. For the life of me I can't find the setting that controls this behavior...can anyone point me in the right direction.
thanks for any feedback
*Smith & Wesson...the original point and click interface*

Might not answer completely, but what is your "profile" set to? I have a "profile" called Office that wll only use the "hardwire" LAN Connection. I have another "profile" called Mobile that will only use the Intel Wireless card, yet another that is "HSPA Modem" that will only use the AT&T wireless card.
Could it be that your "profile" is set to use just your Wireless Connection?
Just a thought -
Message Edited by mickey53usa on 01-09-2009 02:01 PM

I want to put my wifi password in for internet but mac automatically connects, how can i stop this?

So I connect to my wifi automatically, but recently I simply want it to ask for a wifi password instead of automatically connecting because other people use this MacBook also...

Doesn't each user have a login with a different password.. the login on the Macbook itself is much more important than the wireless login.
You should be able to set the Airport or wifi to not remember the password.
Untick remember the network.. clean them all out of the airport settings and start over..

Unable to add a Project File in RoboSource Control

Hi this is Savana Chandra Shekhar,
I am working on RoboHelp 9 with RoboSource Control 3.
Scanario 1: There are two users who want to work on the same project file from different location using RoboHelp and using version control 3. we have a server located in US and i myself located in India. Now, when i am trying to add or load the Project file in Robosource, i am unable to load or add the project file as the file size is around 160 MB.
Scanario 2: When i am using "add to version control" option after setting up the connection (By Proving : Connection Name, Server, Port No., Port Type), i am getting the as displayed below. Please refer the Image attached.
I will be greatful to you if you can please provide some firm solution regarding this issue.
Thanks
Savana Chandra Shekhar
Database: MARSHelpSource
to database,

I can. This is a bug you are seeing we will have fixed in a future release. You are working in a "Local" form (not an online form) and that "Add submit button" should not be shown at all, that is only for an online form. If you move your form online when signed in, then it would have a Submit button automatically in Web View and in Page View would be able to be turned on and off.
Thanks,
Josh

RoboHelp hangs at startup and using robosource control

Hi everybody,
I am relatively new to this forum. I have been using RH X5.02
now for a few months.
|'m quite pleased with it until now and find all postings
here very useful.
So I was content until last monday when I returned from a
holiday of 10 days.
Normally I start RH by clicking a link to RoboHTML.exe from
my desktop.
Instead of asking me which of my projects to open I got
ZILCH.
RH just hangs, the only way to stop is to use task manager to
end the process.
The same happens when I want to add a project to version
control.
the icons of my 'Most recently used file list' (Tools -
Options - General) contain a big red question mark.
I can't remember seeing that before.
Based on previous postings I unchecked 'Save without prompt'.
This didn't change anything.
I did experiment installing PushOK CVS SCC NT interface (v
2.1.1.2) to be able to use the Turtoise CVS version control system
which seemed to work OK.
I didn't decide to use the PushOK and Turtoise system yet,
but kept on using RoboSource control. I didn't uninstall the PushOK
interface as I wanted to do an extra test on our central Turtoise
CVS system later.
I had to renew the trial license for PushOK's software when I
came back. This came up when I started RoboHTML the first time
after my holiday.
As I suspected that this extra interface could have something
to do with my problems I uninstalled and reinstalled all software,
without reinstalling the PushOK software. I did take the projects
out of version control before I uninstalled everything.
I expected to have no problems after all this, but to my
surprise it didn't change anything.
I suspect it has to be something in the registry and/or the
project files themselves.
I am working on several RH HTML-projects at the 'same time',
switching from one into another. All projects are (or were) in
RoboSource control.
I'm working on a Dell laptop using Windows XP Professional
which is automatically updated to latest versions. Yes, all files
are installed locally on the laptop, including the files in
RoboSource Control.
We use NOD 32 virus scanning software.
Can anybody shine some light on this
situation?
tks, Paul

Hi Peter,
I'm sorry, I left out an important piece of info: when I
start RH from the file manager by clicking a RH project it will
start.
I also made a shortcut in whit a project-file to open: no
problem starting.
So I can work and I can open a new project with no problems.
Problem starts as soon as I try to add the project to Version
Control.
I checked all processes and services on my computer. Made
sure all PushOK and CVS software was not installed.
RoboSourceControl was not able to see alternative SCC drivers
to use anymore.
The problems stay.
I can work, if I avoid version control. So I uninstalled
RoboSourceControl too.
Menu's in RH are adjusted and of course I don't have the
hangup problem either
I still can't just start the RH exec without specifying a
starting project. It will just freeze.
If you or anybody else have other suggestions I would be
really gratefull, because I want to use the version control.
tks

Live streaming stops automatically after 15 minutes

I am using flash media server 3 and flash media encoder 2.5.
From media encoder I am sending data to media server and then in
browser I am running flex application (version 3) to view the live
stream. I am not saving it in flv file. After 15 mintues live
streaming stops automatically. I have tested all events related to
it..but none of them executes..Flex3 application is just working as
a client.
Portion of code:
nc.connect ("rtmp://localhost/myLiveApp/instance1/");
vid.attachNetStream (ns);
ns.play("flv:mylivestream");
case "NetStream.Play.StreamNotFound" :
/*The FLV passed to the play() method can't be found. */
mx.controls.Alert.show("stream not found");
break;
code in main.asc file :
application.onAppStart = function()
// generate random payload used in bw detection
this.payload = new Array();
for (var i=0; i<1200; i++){
this.payload
= Math.random(); //16K approx
application.onConnect = function(p_client, p_autoSenseBW)
//Add security here
//p_client.writeAccess = ""; // prevents creating shared
object or live streams.
this.acceptConnection(p_client);
p_client.audioSampleAccess = "/";
p_client.videoSampleAccess = "/";
if (p_autoSenseBW)
this.calculateClientBw(p_client);
else
p_client.call("onBWDone");
Client.prototype.getStreamLength = function(p_streamName) {
return Stream.length(p_streamName);
Client.prototype.checkBandwidth = function() {
application.calculateClientBw(this);
application.calculateClientBw = function(p_client)
var res = new Object();
res.latency = 0;
res.cumLatency = 1;
res.bwTime = 0;
res.count = 0;
res.sent = 0;
res.client = p_client;
var stats = p_client.getStats();
var now = (new Date()).getTime()/1;
res.pakSent = new Array();
res.pakRecv = new Array();
res.beginningValues = {b_down:stats.bytes_out,
b_up:stats.bytes_in, time:now};
res.onResult = function(p_val) {
var now = (new Date()).getTime()/1;
this.pakRecv[this.count] = now;
trace("** onResult this.count = " + this.count + " :
this.sent " + this.sent);
//trace( "Packet interval = " + (this.pakRecv[this.count] -
this.pakSent[this.count])*1 );
this.count++;
var timePassed = (now - this.beginningValues.time);
if (this.count == 1) {
this.latency = Math.min(timePassed, 800);
this.latency = Math.max(this.latency, 10);
//trace("count = " + this.count + ", sent = " + this.sent +
", timePassed = " + timePassed);
// If we have a hi-speed network with low latency send more
to determine
// better bandwidth numbers, send no more than 6 packets
if ( this.count == 2 && (timePassed<2000))
this.pakSent[res.sent++] = now;
this.cumLatency++;
this.client.call("onBWCheck", res, application.payload);
else if ( this.sent == this.count )
// See if we need to normalize latency
if ( this.latency >= 100 )
{ // make sure we detect sattelite and modem correctly
if ( this.pakRecv[1] - this.pakRecv[0] > 1000 )
this.latency = 100;
// Got back responses for all the packets compute the
bandwidth.
var stats = this.client.getStats();
var deltaDown = (stats.bytes_out -
this.beginningValues.b_down)*8/1000;
var deltaTime = ((now - this.beginningValues.time) -
(this.latency * this.cumLatency) )/1000;
if ( deltaTime <= 0 )
deltaTime = (now - this.beginningValues.time)/1000;
var kbitDown = Math.round(deltaDown/deltaTime);
trace("onBWDone: kbitDown = " + kbitDown + ", deltaDown= " +
deltaDown + ", deltaTime = " + deltaTime + ", latency = " +
this.latency + "KBytes " + (stats.bytes_out -
this.beginningValues.b_down)/1024) ;
this.client.call("onBWDone", null, kbitDown, deltaDown,
deltaTime, this.latency );
res.pakSent[res.sent++] = now;
p_client.call("onBWCheck", res, "");
res.pakSent[res.sent++] = now;
p_client.call("onBWCheck", res, application.payload);
What is the problem? From media server console I can see 2
connection for 15 minutes and after that it drops to 1.
I have tested it with medium and low bandwith.
Any help is appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

T60 does not automatically connect to wireless profile at bootup any more

Probably my rose-colored-glasses mistake again.
I let the ThinkVantage system updater install most of the latest updates last night including the
wireless adapter software. Now, when I boot up, my PC no longer automatically connects to
my wireless profile. The radio is on and it is obvious it knows the network is there because it
is highlighted in the Access Connections menu with a Connect option.
It connects just fine when click Connect.
It will still automatically switch between ethernet and wireless when I plug and unplug the
ethernet cable even if I have specifically disconnected from the wireless connection before
plugging in the ethernet cable. It also automatically connects when I log off Windows and log back on.
Is there a setting some place that controls whether it should automatically connect to a
wireless profile at bootup?
I love the brain-dead online FAQ about this exact problem.
It says to click the Connect button if it happens.
Well, duh! What do I do to make it automatically connect like it used to?
I tried unchecking the "allow computer to turn off the radio" setting as other suggested.
But, my problem is not the radio being off.
Thanks

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

My Master server is stopping automatically unable to find out the issue

Dear Experts,
My Master server in CMC is stopping automatically and is going to infinite stop state.when i again restart manually its connecting but again it is stopping.what may be the cause unable to find the solution
Thanks in Advance,
Regards,
Vinay.G

Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
%

I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code). Works fine from the Iphone as such. When I connect my Iphone in Bluetooth to my car, only the phone

I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code).
Works fine from the Iphone as such.
When I connect my Iphone in Bluetooth to the voice-driven system in my car (Mercedes C), only the phone number appears to be transmitted. Entering a conference call number via the Iphone while driving is not a good idea.
How can I fix this ?

That *****. I sell electronics on ebay. Before listing them, i have to test and clean them. I have worked with microsoft Zune, you could sync via wireless through the network to your host computer.
i was hoping Apple would add that feature or the ability to connect to my computer via WiFi or Bluetooth and sync it wirelessly... It would be sweet to have the bluetooth and wireless opened up so you can do more than just connect to headphones or a headset...
I upgraded to the iPhone 4 this past december, i am on replacement # 2 or my 3rd iPhone 4... I was hoping for some upgrades in quality. Also being left handed, it seemed to drop many calls and give me very poor reception. i added a Griffin Elan Form Graphie case that covers all but the front, top button, bottom speakers and volume control buttons and the call and reception quality has improved. But I sure would have loved to see some improvements in the quality and function of the phone...
Thanks for your input, i really appreciate your replies...

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Stop Automatic Connecting to RoboSource Control 3.1

Similar Messages

Maybe you are looking for