Stop automatic full-screen for app

Is there a way to make the app always start in nomal (non-fullscreen) mode?

The only way out of this (that I've found) is to unistall the app (I use AppCleaner), and try to find a public release of the app so that it can be installed from outside of the app store. When I did this, the program automatically downloaded the latest version, the app didn't open in full-screen mode and I was able to access the dialog box and the menu bar without any conflicts.

Similar Messages

Problem with Full Screen Caller App on my Nokia 67...

Hi, am having some trouble with the Full Screen Caller App, that I downloaded yesterday from the Ovi Store.... It seemed to work ok, but is inconsistent - when texts come through, some say who the text is from (& the image associated with that contact), but too often, it reverts back to the phones way (Nokia 6700 slide) & just says 1 new message.... Also, when I call someone, sometimes the FS Caller comes into action, other times, it doesn`t.
I mainly bought this app for the incoming text solution, as my 6700 slide does not state who the text is from (unlike my old 6700 classic)....... My settings all seem to be ok, but I could still be doing something wrong..... Would it help to re-download the app?
Any advice would be very much appreciated...... Im starting to think that maybe I shouldn`t have bought it
Many thanks...

This could a RAM case, as when the phone is doing something and RAM goes down, it starts to close certain apps. Personally if all you wanted was a name on txt msg alerts I would recommend iSMS or ThreadSMS. AFAIK both works on on non-touch phones (iSMS was originally for s60v3) and not only do they provide the senders name on the text alert, they also let you view your messages in conversation view (iphone style) and are free...XD
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Flash Player stopped allowing full screen after update....

Some where arround 10.0 the flsh player on my XP and Vista computers stopped going to full screen when using the little square in the lower right corner of the viewing area... The screen switches to blank white screen while audio continues in the backround... hitting excape brings back the previous screen with the small movie viewing area in the middle of the computer screen. I noticed some where around this time hovering over the square that used to switch to full screen no longer brought up the text telling what the square was supposed to do....ie switch to full screen for the movie...At first I thought this was a Hulu move to get me to purchase the movies... The same results were on YouTube as well and other sites... I noticed that for a time Internet Explirer was able to switch to full screen but Firefox was not... I found that an update of the flash player on IE caused the same loss of full screen as on Firefox... (switch to blank white screen..) Chrome has the same result... Blank white sceen with audio in the background...A search of the forum messages seems to point out a problem that comes and goes as versions come and go... I have found google search results that should lead one to a site that would let you go back to a version that worked for me, but everything leads me to the site that will down load the latest version included the last version that indicated it was fixing my problem and may have for the other hardware and software combinations... but not for any of my computers with XP or Vista... If there was a paid version of Flash player that would allow me to expand the movie beyond the size of a post card, I would buy it... I found a telephone number that apparent linked to India or somewhere where they will support for money but the operator did not give me any confidence that he would do anything other than take the cash....If any one has a "fix" for this, I would sign up for the support, or buy the version or what ever Adobe wants me to do to fix my problem... My email is [email protected] I know that complaining about "free software" is frowned upon, but when the use of the software is demanded by having Hulu and others work only with their software, I think some effort to make the software work can be expected....Should we take the position that if we have a version that works, don't allow any updates...

I haven't read the full text of your post, only "blank white screen on fullscreen". If there are any other important info in the long text that follows, please let me know...
Most issues with fullscreen can be corrected by either
disabling Hardware Acceleration (Flash Player Settings)
or installing the latest available device drivers for the video card

Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?

My mac mini has Elgato 'Eye TV' software that runs in 'Full Screen'. I want to keep this setting & also connect another monitor to the macmini & use other Appilications on the other monitor? Can I run 2 monitor with one of the monitor having Full Screen for Elgato Eye TV?
My early 2009 macmini can run Mac OS 10.5, 10.6, 10.7 & 10.8

Yes, run one from HDMI and the other from Thunderbolt/minidisplayport sockets. In EyeTV Preferences check the screen you want for full screen use and make sure your Dock is on the other one.

Why i can't full screen my apps in my display?? with the mac os x lion, why i can't full screen my apps in my display?? with the mac os x lion

i have a cinema display and i just downloaded the new mac os x lion. the problem is that i can't use full screen with my display, when i push the full screen button the app moves to my macbook, but i want it to stay at the display.

It appears that the full-screen display will only work on the display that has the menu bar.
You can switch the menu bar to your external display by going to Solid Apple -> System Preferences -> Displays, then Arrangement.
Grab the menu bar and drop it on the icon representing your external display.
When you full screen an app it should then full screen on the Cinema display.
I wish it would just full screen on the display the window is on, but that is evidently not the way it was designed to work.

Automatic POP screen for Defect Recording

Hi,
I am working at Result recording, my client want to record the defect at time of result recording with help of Automatic POP screen of defect overview. I did not find the assignment for automatic POP screen for Defect,
Pl helps me for finding that solution

Hi,
You can get the automatic POP screen for Defect Recording after you Reject the characteristics in the result recording. For that you need to flag the Defect recording check box in the control indicators of the inspection characteristics.
If you are using the task list then select the inspection characteristics and then click on the control indicators. Flag (check) the Defect recording check box in the tab results confirmation.
If you are using the master inspection characteristics the click on the control indicators and flag (check) the Defect recording check box in the tab results confirmation.
By this way you can get the pop up. You can also get the automatic defect codes assigned to your result recording after rejecting. For that you need to assign the defect code in the catalogs of your inspection characteristics or master inspection characteristics.
Please give points if found useful.
Regards,
Manoj

Automatically split screen for two windows like in windows 7

how can i automatically split screen for two windows like in windows 7, without drag and move, which is very inefficient.
thanks!

and the lightbulb went off in my head :-P
The one I couldn't remember the name of is HyperDock and I believe it was a recent version which added the functionality you're after. I haven't tried it though so I'd be interested in your opinion of it.

On disabling screen stop w/ full screen apps.

Full screen apps is one of the nicest things in Lion.
But here comes my question: can you tell the OS you don't want the screen to go to stop mode while reading a PDF on preview app while full screen'd?
Please note i don't want to change my energy saving settings (they're good for everything else), and I couldn't find any specific setting on this either in System Settings or in the Preview Preferences itself.
Thanks for the help.
Alessandro

I know this is an older thread, but I need an answer to this as well. Like the OP said, I have to take my apps out of full screen mode on my target computer, which seems very strange to me. This makes it very difficult to manuever around using screen share. Any hints or tips would be greatly appreciated.

How do I turn off the automatic full screen feature that makes the top bar (with the minimize buttons) disappear?

I just downloaded Firefox 4 on a Dell laptop with WinXP. When I'm in a browser window the window resizes automatically and the bar at the top (with the minimize, full and close buttons) disappears. When I drag the cursor up to the top the window resizes again and that top bar appears. Makes me crazy. How do I turn it off?

I'm not aware of the behavior you're describing. I've never seen it, and just tested it for myself. I cannot get windows to zoom to full screen just from moving them to or along the top of the screen. Is this only happening in Photoshop? If so, it may be a Photoshop issue. If not, have you installed any kind of third-party software that might be doing that? Try rebooting in safe mode and see if the problem persists then. If it doesn't, but comes back when you reboot normally, the problem is caused by some third-party software you have installed.

Quicktime automatic full screen, freezes

About a week ago I started having problems with my Quicktime Player with no obvious cause. When I try to open a video in Quicktime Player, the video automatically goes to full screen and stays stuck on the opening frame. I cannot click anywhere in this screen. The only thing I've found that works is putting my computer into standby mode and starting it up again. When I do this, Quicktime player is open to normal size upon restart but if I hit play, no video shows up (although the counter at the bottom runs).
I have run antivirus and spyware software and updated my Quicktime to 7.6.4 to no benefit. When I visited the Quicktime help website, an embedded quicktime graphic had the same effect (the page loaded, then the graphic went full screen although did animate). How can I fix my Quicktime Player?

To be sure I understand you: this means that I CANNOT have quicktime automatically launch in Full Screen mode. I have to have a keyboard, and press the Ctrl-F.
Between that and not being able to have it auto close, that pretty much eliminates Quicktime from being of any value for my purposes, which is to use it in my theatre environment from my HTPC. I don't want to have to be dragging out a keyboard.

Minimizing from full screen for no reason

When I watch movies on the internet and switch to full screen mode after a few mins full screen minimizes back to the web page. how can I stop this?

Thanks for clarification, I often state: so many photographers, so many
workflows...
Personally I think the full screen preview is more meant for sorting
properties then to view the changes made in ACR but it might be a nice
Feature Request (there is a dedicated forum page for this, see the links at
right side of main forum page.
For what it is worth, I tried your way of working and after altering in ACR
I don't have the appearance of the Bridge Window in front, the full screen
preview updates almost immediately. However now the top menu bar for Bridge
is showing as well as my Dock so also on a Mac this workflow is not going to
work 100 % for you
A workaround might be to create your own workspace in Bridge using the
filmstrip mode as basic. Drag the preview panel for this to a size as big as
possible without losing the content panel (place the content panel either at
left side or at top with dragging until you see the blue lines). Now you
should have fast changing big previews without interfering of Bridge window.
For sorting you could choose filename after you have renamed the files. I
use Photodownloader for this upon ingestion rename the files with yyyymmdd
and a sequence number to leave them in natural order I created the files but
with no change to overwrite older files due to limited naming convention
dSLR uses.
But there are many ways to rename, even after having files already in Bridge
sorted with date created and then using batch rename with a proper naming
convention, but that is up to you
I regularly work on photos by starting with a full-screen preview and keying
Ctrl-R to open with ACR. When I am finished with ACR, I am returned to the
full-screen preview. I am guessing that the reorganisation of the Content
panel is what causes the Bridge window to come to the foreground (covering the
full-screen preview) after several seconds. This is all that could be
happening.

Full screen ipad app (1024x768)

Hi there,
Just trying out Adobe Proto to see if it might be useful for work. However, I want to prototype an iPad app. Is there a way to create a full screen app, that's 1024 x 768 in order to actually replicate an iPad app. The defaults don't seem to have it, but surely there must be a way as it's such a standard use case.
Is it possible?

Unfortunately, 1024x768 px layout is not supported at current grid system.
However, you can turn off grid system to design for iPad app wireframe.
Thanks,
Takashi

Stopping the full screen mode auto-advancing

(This was originally posted a week or so ago in what turned out to be the wrong forum. I can't move the thread, so I'm reposting it here.)
I've been googling and searching for this for some time; the only other post I've found[*] with the same problem never got an answer. So here goes.
We're using Acrobat reader 9.3.0 on XP. I'm not very familiar with the software used to create the PDFs; trying to ask the authors what they used got a semi-garbled reply including the words "presentation adobe photoshop cs2", if that helps any. (Their English is only so-so, and there's at least one layer of overworked translators between us, so there's a good deal of mind reading going on.)
Pulling up any of the PDFs in Full Screen Mode starts a sort of slideshow, advancing every few seconds. This is hellishly annoying when trying to read more than a few words or follow more than an inch or two of a line diagram. I tried bringing up Preferences, selecting the Full Screen tab, and unchecking "Advance every ___ seconds", but this had no effect. Exiting the reader and starting it back up after making the change also had no effect (and I double-checked that the box is still unchecked). I was going to try checking the option and then typing a 0 in the space, but it gave an error that the number had to be 1-60.
Setting it to 60 delays the slide show for a minute, for whichever page I happen to be viewing at the time of bringing up the Preferences window, but after autoadvancing to the next page, it reverts to advancing every few seconds.
The "left-click forwards, right-click back" option was checked, and that does work, but having to continually hop back a page and find my place in a diagram again is tediously unproductive. Hitting the space bar just advances the page immediately, trying other space bar combinations had no effect.
What option(s) do I need to twiddle to turn off the autoadvance altogether?
- Ti
[*] http://forums.adobe.com/message/2206926#2206926

GKaiseril wrote:
This is the Acrobat and not Reader forum.
Ah, my mistake. The reader is the only piece of this software family I've used, for some reason everyone in the office calls it Acrobat. I'll see if I can move the thread to the correct forum, or if not, I'll post a question there. Thank you!
Have you looked at the Preferences for your copy of Reader?
Use the menu bar "Edit => Preferences => Category: Full Screen" and look at the options. You should be able to set the time limit or turn it off.
As I wrote in my post, none of that worked.

How do I get my contact's photos to display full screen for incoming calls?

I noticed today that when I get an incoming call it no longer displays "full screen". I keep missing calls because it now only displays as a banner at the top of the screen that someone is calling and their photo (if I've assigned one to them) is a tiny thumbnail.
Did I only just notice now that this is another 'great upgrade' with the new IOS, or is this some weird glitch with my phone? I've been wondering how I've been missing calls in the past week, but just happened to catch it today after I had been using the new map app and wasn't sure if it was just a coincidence or if it's somehow connected..?
Is there any way to change this or am I stuck with it this way??

I've never added my contact on my computer, I've always done it through my phone (I didn't know you could do it through the computer). The problem is not the photo, it's that the call doesn't come in and take up the full screen. Now when a call comes in, it displays as a banner at the top of the phone where the time and date normally would be, so I don't notice anyone's phoning.
As far as I can recall, it's only started happening since yesterday after I used the new map app. I've checked my notifications settings and the phone settings and so far as I can see, everything is set the same way it always was. I checked my hubby's phone to see if it's maybe something new since this last update to IOS6, but the call displays full screen (regardless whether the contact has a photo associated to it or not) and not a banner at the top of the screen like mine.
I still don't know how to change this back. Any other suggestions?

Full screen Air app from Flash

Hi,
Im using Flash CS3, and I´m trying to make my first AIR
applications.
I try to get a full screen view using:
stage.displayState =
StageDisplayState.FULL_SCREEN_INTERACTIVE;
but i only get a full screen window. Can´t get rid of
the window/menu-bar and the system bar on top (I´m using OSX).
I think I have to disable the systemChrome, but I can´t
figure out how to do this from Flash. I´ve seen som AIR
examples in javacript and flex, but nothing that works for me in
Flash.
Best regards
Peter

quote:
Originally posted by:
petermaseide
I still also get the top system bar when i run the
application on OSX, but on WinXP i get a total full screen wiev. I
think there is a way to get rid of the OSX bar and obtain a real
full screen on a mac, but I can´t figure it out from the
documentation.
Has anyone found a way to remove the top menu in OS X? I am
converting a presentation tool created as a Flash executable to
AIR, so that the client can do more with the tool. The tool is used
to pitch clients and they want a true full screen experience on the
Mac. I have been trying for hours, scouring online and through help
files for the answer and cannot find it. Any help would be greatly
appreciated.

Stop automatic full-screen for app

Similar Messages

Maybe you are looking for