Stop battery charging with plugged MacBook Pro

Hi,
is it possible to stop battery charging on a MacBook (Pro) with the power plug connected? I have looked into the PM api docs but cannot find anything to do that.
The idea is to make a menu app to toggle between "Preserve Battery Life" and "Full Power" modes. According to http://www.batteryuniversity.com/parttwo-34.htm, Li-Ion batteries loose less capacity over time when charge level is about 40% of max. capacity, escpecially with the comparatively higher temperatures that are given in a running notebook.
So the "Preserve Battery Life" mode would charge to say 50%, then let the MB run on battery to about 30%, then charge again etc. Before taking it on the road, one would switch to "Full Power" mode to charge the battery to 100%.
Thanks,
Bastian

Hi,
is it possible to stop battery charging on a MacBook (Pro) with the power plug connected? I have looked into the PM api docs but cannot find anything to do that.
The idea is to make a menu app to toggle between "Preserve Battery Life" and "Full Power" modes. According to http://www.batteryuniversity.com/parttwo-34.htm, Li-Ion batteries loose less capacity over time when charge level is about 40% of max. capacity, escpecially with the comparatively higher temperatures that are given in a running notebook.
So the "Preserve Battery Life" mode would charge to say 50%, then let the MB run on battery to about 30%, then charge again etc. Before taking it on the road, one would switch to "Full Power" mode to charge the battery to 100%.
Thanks,
Bastian

Similar Messages

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • When the battery charged fully in macbook pro and the charger (AC Adapter)

    when the battery charged fully in macbook pro and the charger (AC Adapter) is connecting (Showing Green Lamp) to the macbook pro does that effect to the battery live of the macbook pro with Retina Display 15'' ME665
    Also I want know the Best headphone compatible with macbook pro Retina that help me to Hear and Record ?
    Notes ( the macbook pro 15" has just one port for the headphone usually it's tow for record and hear)
    Best Regards,

    The MacBook Pro charging circuit will charge the battery until it reaches 100% charge and then switch to power mode for the MBP.  When the battery drops to 93-95% charge the circuit will switch back to charging mode to top off the battery charge again.  You will not harm the battery or MBP by leaving it plugged in most of the time.
    There are many good headphone/microphone combinations on the market, best really is more a function of how much money you want to spend.  Check those offered in the Apple on-line store for features/price to see what would best fit your needs.  You can also look at audio equipment suppliers, all the earphones need is a standard 3.5 mm plug.

  • Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

    Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

    Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

  • Battery issue with new MacBook Pro 13 inches

    I bought my MacBook Pro on November 2012. I've noticing that my battery will only last for four hours (using chrome, iTunes and Microsoft word) what can I do to fix this problem?
    Also: every time I put the computer on sleep mode the next day it shows that 10 percent of the battery has drained.

    Charge Information:
      Charge Remaining (mAh):          5047
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5721
      Health Information:
      Cycle Count:          46
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -950
      Voltage (mV):          12035

  • HT5234 how to find that my MacBook charger is orginal or not ? i got two different adpter charger with my macbook pro now i dont know which is orginal or not ?

    HOW TO FIND THAT MY MACBOOK PRO POWER CHANGER IS ORGINAL OR NOT .
    WHERE TO FIND IT .

    They should both have an Apple logo on them.
    Clinton

  • I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?

    I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?

    If you have your MBP charger, try a SMC reset:
    http://support.apple.com/en-us/HT201295
    If no success, make an appointment at an Apple store genius bar.
    Ciao.

  • HT204347 Do you connect the charger in the MacBook Pro battery damage if using device ?

    Do you connect the charger in the MacBook Pro battery damage if using device ?
    i am sorry i not good speak english

    Provided you are using the correct charger for your Mac (13" have a 65 watt charger, 15" and 17", an 85 watt charger), it has enough capacity to power the computer for normal tasks, and the leftover power can charge the battery at the same time. If you are doing something very intensive, there may not be leftover power, but the Mac will take power from the battery if needed. Once the battery is fully charged, the pilot light in the charger plug will change from orange to green and no further charge will be applied to the battery.
    You can use your Mac plugged to the charger with no damage to the battery or the computer.

  • Hi, i've just got a problem with my macbook pro: I bought it two years ago and suddenly, it stopped working. Im freaking out. No answer from the people hwo suposed to know about these problems. Any tip??

    Help!
    i had a problem with my macbook pro: on tuesday 16th (agoust, 2011) I went to a friend's house and show her some document i had in my computer, then i turned off my mac and it asked me: "there are some actualizations available, do you want to update before turn off?" i clicked on yes, waited for update and then the macbook turned off. When I got back home, I tried to turn it on again.... but nothing: it didn't sound baaaammmmm as allways, it didn't reacted. I tried again, but useless.
    The next day i went to one of these "authorized management centers", but they coudn't say anything or do anything about it. First they told me the problem was the battery, then the hard disk, then the video card... but don't. I left my mac there by two weeks, hoping they could help me, but they didn't. So I picked it up and go to other place.
    The rare thing is that i have just two years with my mac, and i didn't do anything stupid on it (didn't fall, get wet, microwave, hot, shocked, hit or anything) It just stopped working. Two times it turned on. But if not, it's the same story:
    When i pushed the button to turn on, sounds like baaaaaammmm, but then again, and again, and again, and the screen doesn't get blue or anything, it appears a foder with a "?" and then the computer turns off...
    Im wondering if this is a problem on this computers, because some of my friends told me things much like that that happened with their macbooks.
    What's going on??? why this is happening?? cn you help me?

    This article may help: A flashing question mark appears when you start your Mac.

  • HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

    HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3.  When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working.  When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode.  I am using a DVI connection with the adapter for the mini display plug.  REALLY FRUSTRATING. Any help would be extremely appreciated. 

    Hi lancekatigbak,
    If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    - Brenden

  • I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

    I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
    P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

    Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
    If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
    If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
    ~Lyssa

  • Why has my USB Superdrive suddenly stopped working with my MacBook Pro?

    Why has my Apple USB SuperDrive suddenly stopped working with my MacBook Pro?
    Normally I plug it in and insert a CD or DVD and it is immediately recognised, but today it took the DVD, made a 'whirring' noise for a few seconds and then stopped without being recognised.

    Try the options on this list:
    Credit Kappy.
    Try 1 and 5.
    Ciao.

  • Is this power supply (A1185 10.8 V, 55Wh) compatible with  New White 60W 16.5V 3.65A Laptop AC Adapter Supply Magsafe Power Charger For Apple Macbook pro A1184 A1185

    Is this power supply (A1185 10.8 V, 55Wh) compatible with  New White 60W 16.5V 3.65A Laptop AC Adapter Supply Magsafe Power Charger For Apple Macbook pro A1184 A1185

    All of the A1181 polycarbonate MacBooks use the A1184 60W MagSafe power supply/charger and the A1185 battery. These are the Apple part numbers. Other manufacturers make equivalent replacement products, but the quality may not be acceptable.

  • I just bought a new external monitor (ASUS), and I have DVI adapter plug. When I connect it with my Macbook pro - the monitor remain black (even tho it is 'on')

    I just bought a new external monitor (ASUS), and it have DVI and VGA plugs. I bought the DVI adapter to connect with my macbook pro laptop. But the external monitor remain black… so I turn it off then turn it back on, it said "No VGA signal". Does it means I have to use VGA adapter instead? I am not sure how it work, I am very new to it… I hope you can help me out!
    Thanks!

    Use the Transfer Purchases command in the File menu of iTunes.
    (60931)

  • I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

Maybe you are looking for

  • Issue while posting through MIRO

    Hi, I am posting through MIRO. I am using two POs in MIRO from different contracts. When I add them for one PO amount and QTY feild is filled up properly, but for other the value of QYT is filled into amount and qty field. Could any one help in solvi

  • How to Configure and Integrate EP with CRM

    Hi Everybody, I want to integrate EP with CRM. I am using SAP WAS Server.I have installed Portal. I downloaded CRM Business packages. 1)How to integrate and configure in the EP with SAP R/3(CRM Module). 2)What are the prerequisities. Plaese prove the

  • Retrive Business Partners related to the filters of an Attribute set

    Hi SAP Gurus, I hv a requirement to get Business Partners related to the filters of an Attribute set. I hv used a FM 'CRM_MKTTG_SAL_SEARCH_DB' to get the GUID of the attribute list. If the GUID is passed to another FM 'CRM_MKTTG_SAL_READ' we can get

  • WE20, WE21 settings after SAP BW system copy

    Hi! I copied SAP BW system and have executed the following post installation settings: - BDLS (conversion of logical system names) - Program RS_BW_POST_MIGRATION When I go to tcode RSA1 on my new copied SAP BW system and try to reach source system I

  • Displaying alias in data form

    Hi All I wanty to display Alias of a member in teh dataform. I have selected display type for the member as alias but stiill its not displaying alias. How can we do this? Thanks