Stop button grayed out after a new instance is launched

The stop button gets grayed out after a new instance is launched.  Could someone please help me out?  Just a screenshot reply will do just fine since I'm still using v8.6.  Thanks.

VTKim wrote:
Hi lavalava,
I have looked over your VI and tried to run it and while I can run your VI and get the same error, when I try to recreate it in a new VI, I cannot recreate the issue.  The only difference between your test.vi and mine is that I am not calling the Xcontrol. I am calling the same set of 4 random number generators and putting them into a cluster, but I am not referencing the RNG cluster.  I think this is where the issue lies and it is possible that you Xcontrol is corrupt.  While I could find the Data 2 that shows up in the test.vi, I couldn't find the image.vi  Where are you calling the image.vi? 
Also, have you tried developing your program on a different operating system?  LabVIEW is not supported on Windows XP 64 bit, and while it seems to operate fine in most cases, there are definitely a few instances that will have unexpected behavior in the XP 64 bit environment.  Thanks!
Kim W.
Hi, Kim.  It sounds like you were never able to run the attachment to see the actual problem.  This is simply a drawing issue with Labview.  I have already tried this on XP x64, XP x32, Vista x86, Vista x64, and 7 x86.
The image.vi is inside "RNG" folder.  All the files you needed to run the simulation should be included in that attachment above.
Thanks

Similar Messages

  • Send button grayed out after Snow Leopard

    Install was successful. I followed the instructions for changes to mail to enable sending and receiving. Did tests on all mail accounts and mail sent. Now, when I go to new message, the send button is grayed out and I can't proceed. Anyone have a fix?

    Ernie,
    Not sure what happened as everything tested just fine after installation. But I did go back into preferences to find that the outgoing SMTP had switched to "none." I changed that and it now works. Thank you for your help.

  • Adobe Acrobat 8 Pro Save button grayed out

    I have a user with Windows 7 with a fresh install of Adobe acrobat 8 pro and everytime you open a pdf and type in it the Save button is grayed out. You can go to Save file as but why is the Save button grayed out? I have ran updates and even removed it again and reinstalled still the Save button is grayed out? I even created a new pdf with just test word in it and saved it to desktop the button was still grayed out when i reopened it.

    Only the fully updated Acrobat 9 and Acrobat X products support use under Windows 7.
    Adobe products and operating system compatibility

  • Why Are My Text Align Buttons Grayed Out?

    My users are unable to center text when edited pages in CS3 and CS4. The standard paragraph alignment buttons are grayed out.
    All the users of my site have Admin role, and I have set up the role to allow unrestricted editing. And "Allow Users to Apply Styles"... At screenshot of some of my settings is attached. I don't see why Contribute is not allowing this basic element to work.
    Why Are My Text Align Buttons Grayed Out?
    Any help would be greatly appreciated.

    I experienced the very same issue, but found an interesting quick-fix that worked for us.
    Several of my webpage content managers reported that they could not change the text alignment in pages created using Dreamweaver nested templates. We use nested editable regions in order to restrict portions of the pages (i.e. banners and navigation menus) from being edited.
    I found that Contribute CS4 could realign text in some parts of the affected pages, but not others.
    Further exam revealed that Contribute could change the alignment on any text that was inside a table on those pages. If I inserted a table and then cut-n-pasted the problem text into the table, the text lost its style/formatting, but it could then have its alignment changed.
    Any text not inside a table could not have the alignment changed by Contribute and changing its style/formatting made no difference.
    One note though: It was interesting that after pasting the text into a table, if I selected a chunk of text, the alignment buttons grayed out again. However, if I simply clicked on the line of text (did not select it), the buttons remained active and the text alignment could be changed.
    I don't know why it is happening. The nested regions were working fine, or so I thought, until recently.
    The above is a quick-fix and got my page content managers back online, but I'm still searching for a long-term solution if anyone has one.
    Good luck...
    GaryC3706

  • I/O field grayed out after check box checked ( Dynpro)

    Hi ,
    I have dynpro  dialog screen  with several check boxes linked with input/output field
    When check box is checked the I/O field is editable when check box is empty I/O field should be grayed out.
    I am trying to find the way how checking the check box can trigger the change of attribute of I/O field.
    The IO field should be gray out after checking check box without hitting enter or any other button.
    Please advice
    Chris

    Hi ,
    Thank you for your answer. I was missing Functional code of my check boxes.
    Now i have still issue my I/O field do not turns in gray ( only output) In loop
    I dide like you said ( this is example from my PAI module user-command)
    when 'CB1'.
          loop at screen .
            if screen-name = 'LT_FORMAT_IO'
              and lt_format_cb is initial.
              screen-input = '0'.
              screen-invisible = '1'.
              modify screen.
            endif.
          endloop..
    Once screen is displayed again , the IO field stll remains non grayed out.
    Please advice
    Chris

  • Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

    Hi there,
    I have a problem with the office communicator. I'm able to make a call to one party without any problems. The issue occurs when I add two or more parties into the conversation. The call button will be greyed out and Im unable to make a call. 
    I've uninstalled and reinstalled the OCS but the problem still persists.
    Appreciate if anybody could help.
    Regards,
    Vinod

    Agree with Anthony.<o:p></o:p>
    You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
    Lisa Zheng
    TechNet Community Support

  • Address Book "Edit" button grayed out...unable to edit

    Had to edit a contact's info and was surprised to find the Edit button grayed out, not allowing me to click it. Repairing permissions has not helped.

    V.K., thanks for the suggestion. Unfortunately, before I got to try it, I re-launched Address Book one more time and found it will no longer launch. Its Dock icon just keeps bouncing. Not only that, but I've also found that iCal and Mail will no longer launch, either. The iCal calendar pane and the Mail main window open, but the beach ball spins forever. I've never seen this before. Any ideas?
    I tried a different account on the same computer. No problems there.

  • Artwork Button Grayed-Out

    I have some MP3s of an unknown sample rate and different bit depths. I would like to add artwork to these files, but iTunes has the artwork button grayed-out. I can convert the MP3s to AAC, but the quality will suffer, and I don't have the original uncompressed audio to start with.
    Is there a solution to this?
    Mac Pro 2.66 GHz Quad Xeon   Mac OS X (10.4.7)   3 GB RAM

    If you do a Get Info on the MP3 in iTunes and select the Artwork tab can you add there?
    If you Ctrl Click the track in iTunes and Show in Finder then do another Get Info are the permissions set correctly?
    Regards,
    Colin R.

  • Join Button Grayed Out

    My iPad connects with no problem at home on my Time Capsule and Airport Extreme Routers. At my office, I can't even find out if it will connect or not, because when I select the network to join it, as soon as I type in a password, the JOIN button grays out making it impossible to connect. On hold now with Apple for 20 minutes and they are scratching their heads. Not a good sign for a device I am otherwise crazy about. Anyone else got this issue? For what its worth, its a Linksys Router at the office.

    Oh heck, nevermind. Turns out I was entering the wrong password. DOH! Nothing to see here, move along.

  • Data source active/inactive button grayed out in LBWE

    Hello,
    When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
    Thanks,
    KK

    Hi Kumar,
    The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
    in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now  the status for data source in LBWE will become yellow and activate/deactivate will enable.
    Regards,
    Kams

  • Cannot Approve Journal Batch (Button grayed out in More Actions screen)

    Cannot Approve Journal Batch (Button grayed out in More Actions screen)
    The Journal Batch Approval notification goes to one or more approvers but when any approver opens the journal and tries to approve, the approve batch button is greyed out and nobody can approve the Journal batch. The approver has every authority amount and other wise.
    Any idea what might be wrong? Do I need to setup something in Preference pages etc.,?
    Thanks for your help.
    Harish Amble
    [email protected]

    Are you looking at the Workflow Notifications page or GL page. Please give me the navigation used to reach the page. Typically in workflow notification details page, the Response buttons are either displayed or hidden based on whether the notification has a Result Type attached or not. I don't think they are greyed out based on any rule.
    Workflow notifications does not check the approval authority by itself. Ann appropriate workflow notification with right content and result type should be sent based on the approval authority checked in a previous function activity.
    Thanks
    Vijay

  • Inactive (grayed out) thumbnails in New Tab. I have 6 in use, 3 grayed out.

    Inactive (grayed out) thumbnails in New Tab.
    I have 6 in use, 3 are grayed out. I tried dragging a bookmark into the thumbnail but that actually opens the website instead of fixing the thumbnail. How do I activate these grayed out thumbnails? Firefox 29. Windows7. Thank you.

    The thumbnails are generated from the disk cache, so make sure that the cache is enabled and working and that you do not use "Clear history when Firefox closes" to clear the cache as this disables the disk cache (see about:cache).
    Note that pages loaded via a secure HTTPS link aren't showing on the about:newtab page and also pages that aren't in the cache for some reason (they may be sending no-cache headers; see Tools > Page Info > General) have no thumbnails.

  • Unable to rotate raw images in bridge, rotate buttons grayed out?

    Unable to rotate raw images in bridge, rotate buttons grayed out? 
    Bridge 5.0.2.4. 

    There is an ignore EXIF setting Preferences. I can't remember if that is Bridge or Photoshop, but IIRC it is for DNG files.
    Right.  Check Photosho > Preferences > File handling and make sure 'Ignore EXIF tag, is not checked.  I think that might do it, so long as it refers to sidecare files, because only RAW files would have one.

  • My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    IOS: Wi-Fi or Bluetooth settings greyed out or dim.
    http://support.apple.com/kb/TS1559

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

Maybe you are looking for

  • How to print the invoice(Billing document) using program RSNAST00

    Hi,   I want to print the invoice using the program RSNAST00, but when i fill in selection screen with the following details, Output Application : V3 Object Key : Billing Document Number Output Type : ZPFM Transmission Medium : 1 But it is throwing a

  • Recording audio from external keyboard

    Hello I have a keyboard hooked up to my computer via USB connection. I can record the keyboard to 'software instrument' track but can't to 'audio' track. I have a microphone also USB connection, I can record to 'audio' track, no problem, so Im not su

  • Psc won't switch from copy to print

    I so need help!  My hp psc 750 won't switch from copy mode to print mode.  I have a job I need to print and when I go to print it, it says printer error and puts my print job in queue.  Nothing is waiting to copy, it just won't go to print mode.  Hel

  • HT1766 i got a new iPhone. i need to transfer data from my previous to the new

    I got a new iPhone. I need to transfer all of my data from my old to the new. How do I do that?

  • Index trouble

    Dear all, I have a question about formating the index in Pages. It works fine, I know how to create an automatic index. The only thing that's confusing to me is how do I get spaces between de text of the indexed page and the pagenumber. For example N