Stop command not working

I have a flash file that includes a video clip. The first two
lines of AS3 code say:
movie_1.stop();
movie_1.alpha = 0;
movie_1 is the clip. The clip does not play when I preview it
in flash (CS3). At least not until it has been triggered to play.
The clip does not play when previewed in Dreamweaver after I have
made Web page for it. At least not until it is triggered to play.
When I test the Web page created in Dreamweaver that includes the
Flash file off of my hard drive, the clip does not play. At least
not until it has been triggered to play.
Why is it that the Web page that has been created always
plays the music found in the movie clip once it is posted on the
Internet?!?

I'm sorry for not being clear. The Flash file has movie clip
in it with music in the background of the clip itself (it plays
while the clip plays). What appears to be happening is that the
clip is playing because the music in the clip is heard once this
Web page is opened. The footage is not visible. Maybe because the
actionscript has set the alpha at 0 or maybe because when the page
is first opened there is other content blocking it.
I also want to stress that this does not happen when the
flash or html file are working off my hard drive.

Similar Messages

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

In Photoshop CC 2014 Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

What version of windows are you using?
See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Crontab reboot command not working

Crontab reboot command not working
Greetings
I am new at this so excuse any ignorant mistakes I might be making.
I have a server (MM X.4.9) that I would like to restart every day in order to make sure no programmes are hanging etc. If a program is hanging is should force quit it. Using terminal I have entered the following command:
sudo nano /etc/crontab
Entered password
Than I entered using tab between each sequence:
15 13 1 1 * root reboot
This was a test run and it did not reboot.
Entering
cat /etc/crontab
I got:
# The periodic and atrun jobs have moved to launchd jobs
# See /System/Library/LaunchDaemons
# minute hour mday month wday who command
15 13 1 1 * root reboot
What have I done wrong?
Thanks

Hehe, there you are experimenting with a "reboot" cron command and you are surprised it quit so fast. You are not going to find a "graceful" solution to shutdown dialogs.
MSWord is a Java app, so it is especially important for the command to work that it doesn't get hung up on outer layers of the system. Especially stupid apps that use Java which is not well integrated. I believe Word has a 5 minute autosave, so you should be able to recover most of your document.
This reboot command should be running around 2AM, when the average webserver has minimum traffic. If you feel the need to reboot during busier times of the day, I'd suggest you look at what's causing your applications to crash.

Functions (back & stop ) are not working in production environment

Hi All ...
Some functions (back and stop) are not working in production environment, where as those functions are working in QA testing environement..please answer.. what could be the reasons for not working some functions
in production environement.
Regards,,
Krishna

Hi,
Based on the error message, it is related to the item in your production environment, then the workflow will occur exception.
As your workflow worked perfectly in your other environments, I suggest you can check if some item has is valid in the document library.
You can try to use Fiddler to track the web request and find in which item the workflow occurs exception.
Here are some detailed articles for your reference:
https://msdn.microsoft.com/en-us/library/vstudio/ee231573(v=vs.100).aspx
http://www.andrewconnell.com/blog/SP2013-Workflow-Advanced-Workflow-Debugging-with-Fiddler
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Why does default keyboard shortcut for show/hide baseline grid (opt+command+') not work?

Here's where you need to change the settings: System Preferences > Keyboard > Keyboard Shortcuts:

Suddenly won't boot, start up commands not working... am I out of luck?

Funny, this is my first mac being a hardcore and longtime PC user as my "test" mac... everything works perfectly... of course until 12 days after my warranty is up...
This morning on waking up my mac to turn on some music in iTunes, i click on the iTunes window to bring it into focus. It suddenly closes and dissapears, on returning to the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it) and click on iTunes ot relaunch it after its crash/dissapearance, the task tray then decides to suddenly dissapear/crash (don't know which, it's like a crash but best described as a vanishing act as it doesn't lag or churn before dying, just vanishes).
Possibly related to this issue, not long ago my iChat stopped working, whenever i launched it, it would stay open for a couple seconds and automatically closed. I could sit there all day clicking it, it would open, 2 seconds later, close. I gave up on that. I gave up on that a week ago.
Shortly after my iTunes dissapeared/crash and then after the program tray also dissapearing. my mac mini reboots. Except it's stuck on the screen with the mac apple in the middle of the screen with the moving (yes it's moving) pinwheel on the bottom center of the screen. I let it sit there for a long while... 15 minutes pass nothing happens.
I try rebooting... same thing happens.
I'm go on my PC (Which i'm now typing from) and start searching for solutions. apple support pages suggest I try safe mode with shift.
SAFE MODE: Won't work. I tried pushing both shift buttons on my keyboard at different times (before the start up tone, immediately after the beggining of the start up tone, and after the start up tone finishes) all that happens is, I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever.
I went to forums, read up on other different commands like holding down "X" or option command P+R.... X does the same as the not-working safe mode... option command P+R continually reboots the computer.
And in the end I'm still at square one. thouroughly frustrated. wishing my mac mini was a PC (as i've never had a PC problem I can't fix) Ironic experience... PCs, break often, easily fixed, no support needed.... Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed... and now I think i'm screwed out of the 700$+ i payed for this POS and I've lost my whole iTunes library, all the CDs i've loaded onto it, and all the music and TV shows i've purchased from the apple music store. Good game, apple takes a bunch of money, refuses to support my product which is now dead (had a similar situation with an iPod I had bought for my girlfriend).
My only hope is... I know mac users have a happy helpful community and always band together to help fellow mac users, something the PC world doesn't as-cohsively have. So...
Help me Obi-Wan Kenobi... you guys are my last and only hope.
Thanks in advance.
-John

Hi, John. Welcome to the Discussions.
1. You wrote: "I get the same pinwheel/apple screen that is "loading" (according to the pinwheel) forever"The "pinwheel" is known as a "spinning gear progress indicator."
This, combined with the other issues you've reported, sounds like problems with the hard drive. I suggest you begin troubleshooting using the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. You wrote: "...the shortcut bar (the tray at the bottom for programs, i don't know what mac users call it)"It's called the Dock. See "Mac OS X: About the Dock."
3. You wrote: "...this is my first mac..."My "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online training, and more.
4. You wrote: "...Macs: rarely break, when they do, support needed, but support from apple expires 12 days ago, not easily fixed..."You should have bought the AppleCare Protection Plan (ACPP) before your warranty expired. The ACPP provides a two-year extension on the warranty and three years of telephone support.
PS: Word to the Wise: watch the language. I appreciate your frustration, but don't let it into your posts. These forums are "family friendly" and a good way to get banned from them is to rant, use profanity (including profane abbreviations), etc. What passes for "acceptable behavior" on most PC/Windows forums is not tolerated here.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Boot-up keyboard commands not working

Hello.
For some reason, when my iMac is booting up, the keyboard commands to affect boot-up (for example, holding Option to pick which drive to boot into) do not work. It wasn't too much of an issue before, since I could access my Boot Camp partition through the Startup Disk preferences pane. But that partition suddenly stopped showing up there, and with holding Option not working, my Boot Camp drive is essentially inaccessible to me. Does anyone know why these keyboard boot-up commands are not working, or any way to fix this? I'd greatly appreciate any help.
Thanks in advance.

Hi,
Please help!
I picked up a Mac Pro Dual Intel Quad-Core from a partners office. The system has four 750gb drives. It had Tiger on it.
Here are the steps I tried:
1. I got leopard and installed it. I installed on drive 1.
2. Software updates. Installed Flash runtime and Silverlight runtime.
3. Opened boot camp and split the boot drive equally for windows and mac os.
4. I then tried installing Vista Business and my monitor freaked out. I started having weird colors displaying after the boot up to the Windows Vista Disk. The Disk is from my MSDN subscription and I've installed with it before. The install failed after Windows install restarted the machine.
5. Reformatted all the drives and reinstalled Leopard with the OSX boot DVD. I skipped installing updates and just went straight to boot camp after a fresh Leopard install. Same problem on windows install.
6. I thought the drive might be messed up, so I wiped all the drives again and tried installing OSX on drive 4. BIG MISTAKE :-/
OSX worked but once I started installing windows Vista it crapped out again.
Now I can't boot to anything.
I tried manually putting each drive into bay 1 to boot. No dice.
None of the boot shortcut commands seem to work: Holding option does nothing at start up. Can't boot into single user mode. Holding c does nothing at start up. It's possible my keyboard is not working correctly because I have had problems with my USB keyboard in the past.
Any suggestions?? I'm going nuts here and I need this machine set up ASAP for a huge project.
Thanks in advance.

Galaxy Note 2 Quick Commands Not Working

I've had the Note a couple days now, but for the first time tried quick command. Low and behold, it's not working. I can write, but eventually it just closes before even recognizing the command. I've had no success with any of the stock commands.
I have tried clearing quick commands data in Application Settings as well as creating a new command. Even when I try creating a command it will not let me even select "Done."
I also tried a factory reset this afternoon. Same problem. I've watched several YouTube's so it's not a user error on how to do it. Any help?
All other S Pen functions work. Anything else I should try? Should I call Verizon CS?

UPDATE:
Wednesday: I stopped in a local Verizon kiosk at my mall and tried the quick commands on another Note. Worked perfectly. They said I'd have to call Customer Service to get a replacement. (Note: The employee didn't even know about the feature!) So I called Verizon (*611) and spoke with a "head tech" (whatever that means). He had no idea what was going on esp. given the factory reset I tried. He said the only option was to get a new device or try a different Gmail account (which I really don't want to move my stuff to a new one). Because the Note is an "iconic" device, they wouldn't ship me one unless I prepaid for it (then would be reimbursed when they received my "defective" phone. So I planned to pick up a new one on Thursday.
Thursday: I picked up a new one. After logging into my Gmail account during activation, I tried QC again...still no go. The employee there again had no idea about the feature, but suggested maybe I ought to try a different Gmail account. I said I would later (I had another appointment). So later, I skipped adding my Gmail account (after doing a factory reset) and BAM...Quick Commands worked! But what about my Gmail account....I added it after activation, and BAM-quick commands doesn't work again. THUS THE PROBLEM LIES WITH MY GMAIL ACCOUNT.
Well it's gotten murkier folks...I did yet another factory reset. This time, I tried a different gmail account that has 2 step authentication as well. Guess what? Quick commands worked. So I tried adding my regular gmail (the one giving me fits)-and lo and behold, quick commands stopped working. What would cause this specific gmail account to make quick commands stop working? I've chatted with Samsung (online) and they have no idea. They want me to call voice support. I may tomorrow morning. THIS IS DRIVING ME CRAZY! Also Sammy tried to say that email is not required for quick commands to work (duh). But I've eliminated options and it certainly is a specific email account causing problems. There's another gentlemen on XDA with the same issue as well.

Open file command not working... suggestions?

Running InDesign CS6 on Mac OSX 10.8.5. When I go to open a file from InDesign, I can use Command-Arrow Up and Command-Arrow Down to navigate up and down through folders, but then when I select the file I wish to open, another Command-Down Arrow does NOT open the file. Command-O works, but that's not the issue.
Command-Down Arrow DOES open files in Photoshop, Illustrator, and from the finder (even InDesign documents). Command-Down Arrow DOES open files in InDesign at work, where I'm running both CS3 and CS5 on a slightly older iMac.
InDesign's keyboard shortcuts clearly show that both Command-O and Command-Down Arrow are set as "Open file" key shortcuts.
I've trashed my prefs and restarted.
At my wits end, because Google has revealed that the internet has never heard of this problem. Anyone have any ideas?

I'll definitely ask at a Mac forum as well, though the Command-down arrow does work as it should in the Finder (as well as other apps, internet, adobe, etc) and it does work properly in InDesign except for that last "Open file" command. Apple lists "Command-Down" as being the keyboard shortcut for "Open highlighted file" so I'm wondering if there is some sort of conflict at play here, though I can't find one.
This morning, I checked on my wife's computer, and it's reproduceable. Command-Down works except for opening a file from inside of InDesign (or placing a file). She's running CS6, on Mavericks (not sure what exact version).
So I'm lead to believe this is inherent to only InDesign, and only CS6. Can anyone else reproduce this? (Perhaps it's simply an existing issue with CS6.) If it's simply how InDesign CS6 behaves and everyone has the same result, I could live with that; after all, Enter and Command-O will still work. I'm just trying to isolate the cause, be it InDesign or OSX. If I CAN fix it, I would love to, because I use that shortcut all day long at work and while it does only save a fraction of a second, it does add up over the week, not to mention muscle memory confuses the heck out of me when I get home and suddenly files stop opening for me.
It's like losing a pencil... insignificant and easily worked around, but I hate not knowing. Whether it be where my missing pencil is or why a key shortcut behaves strangely. Thanks!

Send-Mailmessage command not working always

Hi Experts,
When i execute scripts with send-mailmessage command it works sometimes and sometimes it is not working :(
i believe this is due to timeout issue or the server is busy at the time of script execution. Please find the error message below
I need to make sure this command works and we get emails because I'm planning to make this script in schedule job.
is there anyway to write a script like if this commands show this error, execute same command until it sends the email.
Regards, Nidhin.CK

Hi Rhys,
Sorry above mentioned code was not working so i tried below code and its working fine
$i = 0
Do{
$MailError = $null
try{
Send-MailMessage -SmtpServer $smtpservername -To $toaddress -From $fromaddress -Subject $subject -Body $body -BodyAsHtml -ErrorAction Stop
catch{
$MailError = $_.Exception.Message
if ($MailError -ne $null){
$i++
Write-Output "[SOX1] - " $i
Start-Sleep -Seconds 5
} else {
$i = 0
}while ($i -ne 0)
Regards, Nidhin.CK

At new command not working

Hi all,
   I pasted my sample code below. In this i have used "At new event" this command is not working in my code, the values are redundant, How to rectify this problem. Pls help me.
Thanks in advance.
Tables : RBKP,
         RSEG.
Data : Begin of itab,
       BELNR like RBKP-BELNR, " Invoice Document Number
       BUZEI like RSEG-BUZEI, " Invoice Item Number
       GJAHR like RBKP-GJAHR, " Fiscal Year
       EBELN like RSEG-EBELN, " Purchase Order Number
       MENGE like RSEG-MENGE, " Invoice Quantity
       RMWWR like RBKP-RMWWR, " Invoice Amount
       WAERS like RBKP-WAERS, " Currency
       MATNR like RSEG-MATNR, " Material Number
       LIFNR like RBKP-LIFNR, " Vendor Code
       ZTERM like RBKP-ZTERM, " Terms of payment key
       End of itab.
Data itab2 like itab occurs 0 WITH HEADER LINE.
data a like rbkp-lifnr.
Selection-screen : Begin of block a with frame title text-001.
Select-options    : LIF For RBKP-LIFNR.
Select-options    : gjahr For RBKP-gjahr.
Selection-screen : End of block a.
Start-of-selection.
select * from rbkp where LIFNR in LIF and GJAHR in gjahr.
if sy-subrc = 0.
    select * from rseg where BELNR = rbkp-BELNR and gjahr = rbkp-gjahr.
      if sy-subrc = 0.
        itab-BELNR = RBKP-BELNR.
        itab-BUZEI = RSEG-BUZEI.
        itab-GJAHR = RBKP-GJAHR.
        itab-EBELN = RSEG-EBELN.
        itab-MENGE = RSEG-MENGE.
        itab-RMWWR = RBKP-RMWWR.
        itab-WAERS = RBKP-WAERS.
        itab-MATNR = RSEG-MATNR.
        itab-LIFNR = RBKP-LIFNR.
        append itab to itab2.
      endif.
    endselect.
endif.
endselect.
Sort itab2 by LIFNR.
loop at itab2.
Move itab2 to itab.
at new LIFNR.
write : / itab-lifnr.
endat.
endloop.
Regards,
Kesav.

Hi
i am sending a sample code where that events worked
you can understand very easily
REPORT ZDAN108.
Using AT FIRST , AT NEW, AT THE END OF , AT LAST.
DATA: BEGIN OF ITAB OCCURS 0,
      F1 TYPE I,
      F2(6) TYPE C,
      F3(10) TYPE N,
      F4(16) TYPE P DECIMALS 2,
      END OF ITAB.
DATA: SUB_TOT(10) TYPE P DECIMALS 3.
**--1
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 1.
ITAB-F2 = 'ONE'.
ITAB-F3 = 30.
ITAB-F4 = '3000.00'.
APPEND ITAB.
CLEAR ITAB.
*--2
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 2.
ITAB-F2 = 'TWO'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
*-- 3
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 10.
ITAB-F4 = '1000.00'.
APPEND ITAB.
CLEAR ITAB.
ITAB-F1 = 3.
ITAB-F2 = 'THREE'.
ITAB-F3 = 20.
ITAB-F4 = '2000.00'.
APPEND ITAB.
CLEAR ITAB.
SORT ITAB BY F1.
LOOP AT ITAB.
AT FIRST.
WRITE: /35 ' MATERIAL DETAILS:'.
ULINE.
ENDAT.
AT NEW F1.
WRITE: / 'DETAILS OF MATERIAL:' COLOR 7 , ITAB-F1.
ULINE.
ENDAT.
WRITE: / ITAB-F1, ITAB-F2, ITAB-F3, ITAB-F4.
SUB_TOT = SUB_TOT + ITAB-F4.
AT END OF F1.
ULINE.
WRITE: / 'SUB TOTAL :' COLOR 3 INVERSE ON, SUB_TOT COLOR 3 INVERSE ON.
CLEAR SUB_TOT.
ENDAT.
AT LAST.
SUM.
ULINE.
WRITE: 'SUM:', ITAB-F4.
ULINE.
ENDAT.
ENDLOOP.
<b>Reward if usefull</b>

Stop command not working

Similar Messages

Maybe you are looking for