Stop getting voice mail emails

I have a verizon pearl.  Is there anyway to stop getting a emails everytime I get a voicemail?  I think that the little tape icon is plenty and it is annoying to have to delete each email.
If this is not possible, is there a way to automatically delete the voicemail emails after the voicemails are listened to??

You could set up a filter against the BIS e-mail account to block the e-mail messages from the sender's address.

Similar Messages

  • Upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

    upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

    So now I went back to the screen that orginally asked me for my Apple ID and passort, and instead of entering my Apple ID i entered the email address associated with it and the new password.  It now tells me "You can't sign in because your account was disabled for security reasons.  To enable your account, reset your passwort at iforgot.apple.com"
    I have now changed my password twice and it still doesn't work.
    Until I get this resolved my tablet is useless.

  • My iPhone 4S has stopped recording voice mail messages. How can I fix?

    My iPhone 4S (sprint) has stopped recording voice mail messages. The phone is 2 months old and it stopped about a month ago, but it took me several weeks to realize that there was a problem as I initially thought that callers just weren't leaving a message. I have now tried to leave myself voice messages and confirmed that it's showing up as a voice mail but failing to record it. Has anyone ever encountered this problem and if so, what is the fix?

    No iPhone records voicemail messages.  Visual voicemail is simply an interface to the carriers voicemail servers.
    Contact the carrier to troubleshoot the issue with their voicemail.

  • EDGE is down.. how do i get voice mails?

    how can i get my voice mails if they are not showing up on my phone because the EDGE service has been down all day here in Minneapolis.

    You can also press phone > keypad > and hold down the
    1 key for a few seconds...that will dial into the old
    voicemail system.  
    I didn't know you could actually "hold down" a touch screen button. I thought it would just register a press but sure enough I tried it and it works. Pretty cool!

  • Can you block a number from ringing, however still get voice mail.  Is that possible???

    There are some folks that call so much and it seems at just the wrong time.  I'd like to able to block them so my phone doesn't ring and yet, still get the voice mails that I can check at a later date when it's convenient.   Is there a way to do that???

    Thank you. I thought there was a feature on the phone that allowed for that to happen.
    My next question is, however. If I'm texting another party, and the delivered sign is not shown. Is it a possibility that my phone may have been blocked from receiving any texts?
    Or, is it possible that the text message did not go through, yet?
    Thanks again for answering my inquiry.
    Dawn.

  • Why can't i get my verizon mail on outlook? It just recently stopped getting my mail saying I have the wrong username or password.  Both are correct.

    recently cannot get Verizon mail on Outlook (ipad) - always could before - can send but that's all on Verizon?

    There is no outlook on iPads.
    Check your email settings.

  • Stop getting Support Community emails

    I have been inundated with email since I joined this community today. Although I have changed all the notification preferences to NO, I am getting 20+ notifications seemingly every 5 or so minutes. I want to STOP getting all notificfations. HELP!

    Although I have changed all the notification preferences to NO
    That will only turn off subscribing to topics you post in or start.
    To turn off notification of everything already subscribed to, go here -> https://discussions.apple.com/people/kdinoregon?view=watches
    and check everything then click Remove selected notifications.

  • How do I get voice mail removed from my iPhone 5s

    I Don't want voice mail on my iphone5s how can I remove this

    Voicemail is provided by your phone carrier, contact them.

  • Cannot get voice mail to work properly.

    I have a Galaxy 5S,  I have deleted all my voice mail messages but the screen still says there is one. When I push 7 it tells me there r none to delete. I have shut my phone down 3 times hopi g rebooting would help, but doesnt

    Perhaps you can try to take out the sim card after powering down.  Wait a min or 2 and reinsert SIM then power on.  If that doesn't work, sounds like it is another of the widespread issues and bugs in 5.0, unless you haven't updated to 5.0 yet.  On a related note, but different phone, I had a similar issue and called my VM and slowly went through option 7 to delete messages just to make sure.  I also had to have a data connection, for some reason, for the icon to disappear.

  • Unity Express - Incoming calls wont get voice mail

    CUE works fine with telephones on my local network. Incoming and outgoing calls work fine.
    However when I get an incoming call via SIP trunk the call will not get forwarded to unity express after 10 seconds. The line goes dead.
    I searched for another post which suggested the following commands:
    telephony-service
    call-forward pattern .T
    voice service voip
    allow connections from h323 to sip
    I've double checked them and there's still something wrong.
    Here's my current configuration:
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    h323
    voice class codec 1
    codec preference 1 g711ulaw
    codec preference 2 g711alaw
    telephony-service
    load 7910 P00403020214
    load 7960-7940 P00305000301
    max-ephones 24
    max-dn 24
    ip source-address 192.168.20.1 port 2000
    auto assign 1 to 24
    system message Comtek
    voicemail 3000
    max-conferences 8 gain -6
    call-forward pattern .T
    moh music-on-hold.au
    time-webedit
    transfer-system full-consult
    transfer-pattern 2...
    transfer-pattern 3...
    directory last-name-first
    directory entry 2 2001 name Phone Two 7912
    directory entry 3 2000 name Phone One 7970
    ephone-dn 1 dual-line
    number 2000 secondary 441833000000
    call-forward busy 3000
    call-forward noan 3000 timeout 10
    no huntstop
    ephone 1
    no multicast-moh
    device-security-mode none
    mac-address 0017.0EF0.3642
    type 7970
    button 1:1
    So pros, any suggestions?
    Thanks

    I made a new dial-peer to handle incoming calls as follows.
    dial-peer voice 1000 voip
    description Incoming SIP
    translation-profile incoming SIPin
    voice-class codec 1
    session protocol sipv2
    incoming called-number .T
    dtmf-relay rtp-nte
    no vad
    The translation-profile puts the call through to my 2000 extension.
    This is my "show call active voice brief" when an external incoming call is ringing through to my 2000 ephone-dn.
    To me this seems to show the dial-peer "1000" matching and using the g711ulaw codec
    Telephony call-legs: 1
    SIP call-legs: 1
    H323 call-legs: 0
    Call agent controlled call-legs: 0
    SCCP call-legs: 0
    Multicast call-legs: 0
    Total call-legs: 2
    1715 : 552 596706500ms.1 +-1 pid:1000 Answer +441833696807 connecting
    dur 00:00:00 tx:0/0 rx:0/0
    IP 87.127.240.98:16188 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
    media inactive detected:n media contrl rcvd:n/a timestamp:n/a
    long duration call detected:n long duration call duration:n/a timestamp:n/a
    1715 : 553 596706510ms.1 +-1 pid:20001 Originate 2000 connecting
    dur 00:00:00 tx:0/0 rx:0/0
    Tele 50/0/1 (553) [50/0/1.0] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm
    Telephony call-legs: 1
    SIP call-legs: 1
    H323 call-legs: 0
    Call agent controlled call-legs: 0
    SCCP call-legs: 0
    Multicast call-legs: 0
    Total call-legs: 2
    This is the "show call active voice brief" for an external incoming call when the call is established.
    Telephony call-legs: 1
    SIP call-legs: 1
    H323 call-legs: 0
    Call agent controlled call-legs: 0
    SCCP call-legs: 0
    Multicast call-legs: 0
    Total call-legs: 2
    1731 : 569 597220040ms.1 +3730 pid:1000 Answer +441833696807 active
    dur 00:00:02 tx:105/16800 rx:104/16640
    IP 87.127.240.98:15162 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711ulaw TextRelay: off
    media inactive detected:n media contrl rcvd:n/a timestamp:n/a
    long duration call detected:n long duration call duration:n/a timestamp:n/a
    1731 : 570 597220060ms.1 +3700 pid:20001 Originate 2000 active
    dur 00:00:02 tx:0/0 rx:105/16800
    Tele 50/0/1 (570) [50/0/1.0] tx:16180/16180/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm
    Telephony call-legs: 1
    SIP call-legs: 1
    H323 call-legs: 0
    Call agent controlled call-legs: 0
    SCCP call-legs: 0
    Multicast call-legs: 0
    Total call-legs: 2
    Not too sure where to go from here.

  • How can i permanently stop getting "no sender" emails on my iPhone?

    i have been getting "no sender" messages almost every day through my .me account on my iphone.
    the only way to get rid of them is to go into settings on that account and turn the mail off and then back on.
    There must be a better way to have things set so this does not keep happening.
    Could my icloud be working incorrectly or is someone trying to hack my account?

    If I can not set up a second Contacts folder, does anybody have an alternative way of having contact information that a person could see the information from an Outlook Format available for viewing?

  • How to stop getting junk mail

    How do I stop the weekly US postal service mailings from AT&T U-verse?  Seriously.  I've contacted AT&T a few times, and nothing works.  AT&T has literally tried to steal money from me in the past, so I have no desire to ever be a customer, and I receive more junk mail from them than most other companies combined (about ~70 mailings per year).  You are wasting your time, money, and our resources with this crap. Seriously, how does one make the junkmail stop?

    Hi 
    Thank you for posting! I believe there might be some options to opt out of some or all mail, our team will be happy to help you with whatever we can! Please send us a private message by clicking here. Please include your full name, phone number, account number and the best time you can be reached.
    Please let me know if you have any questions.
    Thank you,
    Dmitriy

  • MacBook OS 10.7.5 stops getting Yahoo Mails from 1/13/15

    My MB kept asking me for YM password. I typed in a few times, got irritated I just canceled. That was on 1/13/15. I could not get YM from that on. My iPad has no problem in getting YM. I had deleted and added YM a few times, no luck. I also rebooted a few times, no luck either. Anyone has solution to this problem?

    Open Users & Groups preferences. Click on lock icon and enter your admin password. Click on the Add [+] button below the users list. Configure the new account and be sure to check the box for an Admin account. You also need to change the auto-login account which is done in Login Options. Log out of your account then log into the new one.
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Stopped getting Facetime and email message tones To notify me of them

    To ipad community,can anybody tell me what I can do I am not receiving FaceTime and email tones on my iPad 2 ios8.3

    They do unless their iPhone remains connected to a power source while the iPhone is not being actively used. The wi-fi connection being dropped unless the iPhone remains connected to a power source when not being actively used has been available to conserve battery use since the original iPhone.
    And not being able to receive a call when the iPhone is actively accessing the internet with Verizon's network is a limitation with Verizon's cellular network. No such problem with GSM carriers such as with ATT or T-Mobile.
    If a call goes straight to voicemail while your iPhone is being actively used when connected to an available wi-fi network, you need to take that up with Verizon first. It could be a problem with your iPhone but I would start with Verizon.

  • Can't get voice mail to activate

    I've recorded my voicemail but after four rings, the fax tone kicks in (the line is connected to a fax machine). Is there a way to have the phone line function as both a message repository as well as a fax line? Maybe by adjusting the number of rings before voicemail should kick in? Thanks!

    This only happens when you have Speaker turned on in Voicemail.  Turn off Speaker before lifting iPhone to your ear.

Maybe you are looking for

  • New iOS 4.1 is a battery KiLLER!

    As i bought my iPhone 3Gs I used the normal 3. ... iOS versions .Some weeks later i updated the iOS 4. Ok! nothing to say. But with 4.1 my battery is down on 55% after play 40 minutes, 30 minutes of music and 5 min at 3G internet. Also on Standby Mod

  • Sharing Authentication between different weblogic istances

    Hi, I'm using WebLogic 10.3.5. Is there a way to share only the authentication (getRemoreUser() info) between 2 distinct ear, each deployed on different weblogic istances (same WL domain) and with only one of them under my control? I done it successf

  • Mousewheel -- How to get Event in a mouseListener.

    Hi, i'm trying to scroll a table in a JScrollpane (with JViewport) by using the Mousewheel like you are used to in the windows enviroment. My problem is that the Button_Mask2 is only triggered when you press the mouseWheel like a Button. So which mod

  • Ristrict sales order creation at plant level through authorizations

    Hi  , I want to ristrict users to create sales orders for specific plants . Can anyone please tell me how to do it through authorizations. I am not able to find any authorization object for plant in VA01 and i have tried to  add object from other mod

  • NT Workstation datatbase creation failure

    Hi I'm installing Oracle 9.0.1.1.1 on NT Workstation 4.0 with SPK 6. It doesn't complete the install. It fails on creating a startup database using the Database Configuration Assistant. It also fails when I attempt to run it manually. I've tried this