Stop iCloud log in for every user.

Is there a way to stop the iCloud log in box from coming up every time a user logs into A mac with Yosemite.
This topic first appeared in the Spiceworks Community

Today, it’s hard to imagine a job that doesn’t touch some form of technology at some point, so we understand that introducing and implementing new technologies into your business requires much more stakeholder involvement and acceptance than it would have, even just 5 years ago.Building the case for change can be a daunting task but when it comes to tech enhancements, it’s normally well worth it.We understand that you’re probably considering Office 365 for all the right reasons; the collaboration opportunities, the built in security, compliance & privacy, with seamless device compatibility, the list goes on. By choosing the right technology Partner you could also benefit from a wealth of support too.To help you convince the decision makers it’s the right way ahead, we’ve put together3.6.5 reasons to choose Office 365, including how as...

Similar Messages

  • How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users?

    How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users? I and my wife have two Iphones (iOS 6.1.4) and we want to have use 2 iCloud accounts for one PC.

    Disregard the question. The solution has nothing to do with any "Firefox bug". Turns out that my session wasn't being managed properly. Or rather, I was accidentally deleting other users' information when new users logged in. So if I had user 1 and user 2, and user 2 logged in after user 1, some of user 1's information would be deleted, resulting in the errors.
    Oops; sorry about the false alarm. :)
    (Was hoping to retract the question, but it looks like others have a similar problem.)

  • How to create an default profile for every user on one machine? Deployment of configurations?

    On firefox 3.5.X i can copy an configured profile from an user-folder to the programm folder of firefox. \mozilla firefox\defaults\profiles.
    After an new user log in to the machine the default profile will get the actual profile of the new user. With all bookmarks, configurations and so on.
    But this doesn't work with the firefox 3.6.10? What changed? What will be the way i can get an default configuration for every user on one machine? I want to deploy the firefox with an default configuration in our enterprise? Why does the behaviour change?
    What to do?
    Thanks...

    No - there are no missing data, because nothing will be copied. The profile - folder does not work.
    There are the standard first start behavior.
    There might be another trick? Hint? Todo?
    Thanks.

  • How to Default what fields and assignment blocks appear for every user?

    Is there a standard way to default what users see in the webui? We'd like to display certain assignment blocks, fields, etc without having the user go thru the personalization process. There are certain pieces we need to display across the board for every user and would like to set this up in advance of them logging into the WebUI.
    Thanks in advance

    Hi James,
    With the business roles you can define what the user is allowed to see or do and not.
    So you create your special user business role e.g. Z_USER_SALESPRO and then you can create a business role specific configuration of the views (add/ remove fields) or overview pages (add/remove assignment blocks).
    If you want to you can also deny user with this business role the possibility to personalize their pages at all.
    If you want to show information to all user in the same way then just maintain the default configuration in the enhanced component. As the WebUI always looks for the most specific key found within the configurations available.
    Please make sure you work in default configuration of the enhanced component, else you change SAP standard cheat sheet.
    Hope this helps.
    Best regards,
    Thea

  • How to control the data to display for every users?

    Hello Experts,
    Im creating a module in ORACLE forms6i and I want to control all the data to display for every USERs. I have 1 Table and it has 5 columns.
    My module has 5 columns and 5 rows of records to display.
    Problems:
    For USER1, I want to display all DATA in column3 and column4 only and all remaining columns shoud be null.
    For USER2 , I want to dislplay all data in Column1 only and all remaining columns should be null.
    How can i control all the data to display for each columns? Can you help me please. Im using the Clear_Items but its not working only the first row are null but the remaining
    rows has its records.
    Thanks.
    Lala

    I understand that you want certain columns not to show at all on the canvas when a certain user opens the form. Then, in the when-new-form-instance trigger, you should set_item_property(x_item, visible, property_false) for each item you do not want to be dislayed, depending on the user.

  • WHY  PGA  IS  REQUIRED  FOR  EVERY USER  ?

    Good Morning Everyone ;
    I have a question  about PGA.
    WHY  PGA IS REQUIRED FOR  EVERY USER ?
    What i got from google ..
    Even though the parse information for SQL or PL/SQL may already be available in library cache of shared pool,
    the value upon which the user want to execute the select or update statement cannot be shared.
    I cant realize it   Can anyone show clear  example , if  possible ?
    DB Version is  10.2.0.4.0
    OS : oracle linux 5.5
    Thanks in advance ..

    Thanks aman and heok.
    My Question :
    Your explanation is clear. I think i am getting little bit confused.
    Could you please clarify little more ?
    >> session 1 :
    user is HR
    SQL>select * from tab1  ORDER BY name;
    >> session 2 :
    user is scott
    SQL>select * from tab1 where ORDER BY name;
    >> session 3 :
    user is USER1
    SQL>select * from TAB1 where ORDER BY name;
    >> session 4 :
    user is USER2
    SQL>select * from TAB1 where ORDER BY name;
    IS this right aman ?
    Already sql statements are avail in SGA ,Even though all above users needs same information.
    Oracle does sorting operation in PGA. If PGA exceeds , oracle will use temporary tablespace .
    Thanks heok and aman.

  • How to stop pwsswd  change option for Admin user id or SLD or monitor ID

    Hello frineds,
    As I know we do have one option to disable password change prompt using J2EE Admin tool ( Go to security provider->Usermanagement and search for the user
    Select the user and check "No password change required") but this option checked for all user users by default and it prompting password change after 90 days (default).
    Is there any other way to stop change password prompt for admin user ID's?
    Any help is a great help
    Thanks and regards,
    Venkat

    Hi,
    I think we  need to change the parameter value in the document type definition.
    Check this: http://www.atg.com/repositories/ContentCatalogRepository_en/manuals/ATG6.0.0/intframe/intframe0210.html
    Please check with your BASIS team regarding this.
    Thanks,

  • Hiding Links from Infoview (e.g Log off) for some users

    Hi,
    Can we hide links in Infoview (e.g log off) for some users in BO XI R2 ?
    Thanks

    Hi Vaneet,
    No we cannot hide links of infoview  for some users in BO XI R2.
    Thanks,
    Praveen.

  • Adobe Reader Pro 9 requires password for every user after seciurity updates?

    Everytime I installe any Adobe Reader Pro seciurity updates like 9.4.3 and 9.4.4 on our Macs 10.6.6 and 10.6.7,
    I had to input admin password for every user as reader is stoppng on install updates screen,
    We have some hotmacs that are shared so it's a bit of a pain. Users don't have admin acess
    to be able to install software on them.
    How do I resolve this?
    Here's what I tried. None of these things resolved the problem for me.
    Repair disk permissions.
    Restart the Mac.
    Repair Adobe installation

    Hi Sorry, the product in qusitons is Adobe Acrobat Pro 9.4.4 and 9.3.4 updates.
    If you launch Acrobat Pro as the admin user, then authorise when requested, does that fix the problem for all users?
    Or does this happen every time, for each user?
    It does prompt for password for every user, thefore my flustration we have multiple editors using a Hotmac.
    And we have to enter the password at least one time for every user after stupid seciurity update.
    Presumably, Acrobat is trying to write to a location that Standard users don't have permission for.
    Standard users don't have admin access to Mac but still I find adobe behevior very annoying.
    I think this is normal enterpirse practise.
    What happens if you allow write access to the Acrobat application folder and subcontents? Make sure you know what you're doing and how to restore it.
    Would try this but still I would expect adobe to fix it updates.
    Thanks,

  • Is it possible to save System preference settings for every user that logins to a Mac OS X?

    I work at a school and we have iMacs running Mavericks 10.9 in our environment.  We have them binded to our Windows domain so that way students can use their own login to access the Macs.  I have a number of System preference settings that I would like to take a effect, but I only see that these settings take effect for every user.  So even if I login as the Main administrator account and set settings in System Preferences, such as not allowing the Wifi symbol to show, the next user that logins will still see the wifi symbol because the setting isn't taking effect for their System preferences.  Does anyone know a way to get System Preference settings to take affect for every user that logins? Maybe a script?

    Modifying the user template is not supported. You can Google for people who have done it in the past. I would recommend going to official route, if possible. Here are a couple of training documents. I'm sure there is more available though more official channels.
    http://training.apple.com/pdf/wp_osx_configuration_profiles_ml.pdf
    https://www.apple.com/education/docs/l521219b_osx_deployment_guide_030513.pdf
    http://training.apple.com/pdf/wp_integrating_active_directory_mav.pdf

  • Setting up MPD for every user on the machine

    I'm having a few problems setting up MPD. What I want to do is configure MPD such that it starts automatically at login using the current user config file (so that it uses the correct db) and stops playing and exit (to free port 6600) on logout. This way when a different user logs in MPD will use the correct database and playlists dir.
    So far I've created all the needed files (.mpd/{.conf,.pid,etc}) in the home dirs of every user and followed this (MPD/Autostart with systemd/Current Setup) then I followed these steps for user1 (created the needed files in user1's home) Using systemd to manage your session (Should I repeat them for user2?). I'm using this service for mpd:
    [Unit]
    Description=Music Player Daemon
    [Service]
    ExecStart=/usr/bin/mpd %h/.config/mpd/mpd.conf --no-daemon
    ExecStop= /usr/bin/mpd %h/.config/mpd/mpd.conf --kill  #I expected this to stop mpd on logout
    [Install]
    WantedBy=default.target
    The problem is that when I log out the music keeps playing which means mpd is still running. If I log in as user2 I can see users1 database (using ncmpc) but I can't control the playback e.g:If I want to skip the current track it stops playing.
    Any ideas?

    rodrigomb81 wrote:ExecStop= /usr/bin/mpd %h/.config/mpd/mpd.conf --kill  #I expected this to stop mpd on logout
    That will stop mpd when the service is stopped, which will happen when the user instance of systemd exits. So logout should do `systemctl --user exit`. (This might be mentioned on the wiki, but that systemd/user page is a big mess.)

  • How to create different log files for different users in log4j

    I want to create different logs for different users, using different appenders for each user so that logs are created in his file only.
    Confusion:How to direct them to different files in my logger class

    Hi Avi,
    First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
    I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
    I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
    Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
    Thanks and Regards,
    Ravi.

  • How to specify default desktop and/or startup items for EVERY user login?

    Hi
    My work iMac is

    +Oops! User error! Anyway, here's the rest of my message...+
    The iMac I use at the university where I work connects to Active Directory for authentication - there are no local user logins (apart from the admin account of course).
    I'd like to know how to set the default items for all user logins. Specifically, I'd like the system to automatically create an alias on the desktop to a shared folder for every new user login, or automatically open that folder in Finder when logged in.
    Though I'm the main user, if I'm not around other people may require access to the stuff I do for the multitude of projects I work on for a department of 30 people, and as everyone else uses a PC and only a few are Mac savvy, I'd like to make it as easy as possible for the poor dears to find the files. (We have a shared network drive where I can put some stuff but unfortunately our allocation is not very big!)
    Thanks.

  • How can I share my a public calendar from iCal (through iCloud) with Outlook for Windows users?

    I have a public work calendar that I wish to share with colleagues in the office. No issues for those having a Mac or an iPhone, but how can I share the calendar with Outlook for Windows users?
    Thanks for the help!

    Hello ramirofromstrockholm,
    The steps detailed below explain how to go about publicly share a calendar (which doesn't require that one be an iCloud user to accept).
    Click the Share button to the right of the calendar you want to share, then select Public Calendar.
    Note:   You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
    To invite people to view the calendar, click Email Link.
    Type one or more email addresses in the To field, then click Send.
    The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
    In the sidebar, a shared calendar has a dark Share button.
    You can also resend invitations to one or more invited participants at any time.
    iCloud: Share a calendar with others
    http://support.apple.com/kb/PH2690
    Regards,
    Allen

  • To create a room for every user or not?

    My application requires that guest/participants do not need to login. They only enter names. Also the meetings are not scheduled. It's on walk in basis where host waits for the guests. In my case, I will have hundreds and eventually thousands of hosts. For every host, do I need to create a new room and allocate it to only that user? Is that how the rooms supposed to used or there is any other data structure such as groups which I can use? Are there limitations to how many rooms one application can create?

    Same answer, you can do both
    I wouldn't create a room per customer, but you could potentially create one room per agent. You'll need to build your own application that would allow your to select the correct agent given the customer needs, but you need to do that anyway.
    Once you know the agent, again, having the agent always enter his/her room and wait for customers, or have the agent enter a random room and then pair it with a customer is pretty much the same.
    Fixed rooms will save you to manage room creation/deletion (you will still need to create a room when a new agent joins a company and remove it when he leaves, but that can be part of the normal management of agents).
    One feature that we are planning to add is rooms that "autodelete" when the session terminate, so you can easily create a random room on the fly and don't have to remeber to cleanup.
    But basically I think what you do depends on a couple of workflows :
    1) A host (teacher, agent, advisor) has routinely scheduled sessions with customers (or students). In this case it may be easier to have a fixed room for the host and direct the guests to that room for the scheduled session (again, using external authentication you can guarantee that only users registered or authorized for that session can join that room)
    2) Two users (host/guest, agent/customer, two random users, etc.) wants to initiate an ad-hoc conversation. In this case it may be easier to create a room on the fly (or pick a room from a pool of existing rooms) and direct both users to that room.
    As I said in the previous post the serverIntegration modules are your friends here: they have all the methods to create/delete rooms, create authentication tokens and in general manage your account.

Maybe you are looking for