Stop Image Capture for iPhone?

I know I can stop Image Capture opening for all devices but is there any way of stopping it open when I connect just my iPhone? I find it useful opening up when I attach a camera but not my iPhone. I'm presuming not but just thought I'd ask.

that would be a nice feature, apple should take that as a feature request.
i wouldn't even need an option to configure all cameras, just two switches to configure launching image capture on/off when an iphone is connected, and when a photo camera (or cardreader with compact flash card etc.) is connected.

Similar Messages

  • Problems with Image Capture for Epson Scanner

    When using image capture for my Epson scanner, at the Image Correction, when I select Manual I get no menu options.

    There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
    Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
    If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

  • Stop image capture from opening when iphone is connected ?

    how do i get "image capture" to stop auto opening when i connect my iphone ?
    i have set image capture to open when i connect a camera, but i don't want it to open when i connect the iphone.
    is this possible ?

    Chenks,
    The way you have it set, Image Capture will open whenever it detects photos that have been taken with the iPhone. To prevent it, you can just import the photos you've taken with the iPhone to your computer and then erase them off the phone (you can then sync them back to the phone if you want them), or you can set Image Capture to not open when any camera is connected. That will apply to other digital cameras as well as the iPhone.
    Hope this helps,
    Jennifer B.

  • Image Capture from iPhone to OS X and File Permissions

    Hello.  I'm running Lion 10.7.3 and have an iPhone 4S and iPad 2.  When I use the Image Capture app to transfer pictures and videos from my devices to OS X it works great with the exception of one problem.  Every file that it copies over ends up with permissions of:
    (Me): Read & Write
    everyone: No Access
    This is problematic because when my wife is logged into her profile or anyone else tries to view these files via shared folders, they can't see them.  I'm putting them into a folder I created on "Macintosh HD".  The folder that they are in has permission of:
    (Me): Read & Write
    wheel: Read only
    everyone: Read only
    Each time I import I suppose I could drop into Terminal and run a command to fix the issues but there must be a better way.
    Any ideas?  Thank you in advance.

    Got a solution using Automator.
    Create a workflow like:
    This is an Image Capture Plugin. When you open Automator select Image Capture as the type of workflow and select these two actions.
    Copy Finder Items will take the image from Image Capture and copy to your disk. Select the folder you want the image to go to in the To: pulldown. You should select the /Users/Shared folder and any subfolder you wish. I made a folder named Images.
    In the second action make sure Pass Input: is set to as arguments and then add the chmod 644
    Then exit Automator giving the workflow a name. In Image Capture you should see the workflow you just created
    in the Import To: pulldown. Select it. Now when you import the fiels wil be copied to the folder you specified and the permissions will be set to 644 rw for you r for everyone else.
    good luck. post back if you have any questions.
    (and this is in the Lion list so my question about Aperture above is meaningless! )

  • Image Capture says iPhone has 0 items to import, but there are 4 movies

    I took four movies last night, and when I came home and plugged in my iPhone, iPhoto said there are 0 items. When I disconnected the iPhone, I noticed iPhoto did not notice -- it still said there are 0 items in my iPhone. I expected the iPhone icon to go away when I unplugged the phone. So I right clicked on the icon in iphoto and ejected it. Then plugged the phone back in. Now it does not show up at all. So I went to Image Capture. Image Capture sees the phone, but still thinks there are 0 movies.
    I think I solved this by restarting the computer last time, but I want to stop having to do that. Is there a file or something somewhere I can delete that is corrupt? I tried deleting the iPhoto cache.
    I also notice that although I told ImageCapture to open iPhoto when camera is inserted, it does not. ***? I guess I'll restart my computer, but what a PITA.

    Sure enough, after reboot, there are my movies in iPhoto ready to import. But of course, having to reboot to see my photos is very tedious. What is going on, Apple? It's not iPhoto prefs, it's not iPhoto cache, it's not ImageCapture prefs. ***?

  • Image Capture for Epson Scanner producing very dark results

    I recently upgraded to a new iMac running Mountain Lion. I have a new Epson Perfection v750 Pro scanner, which I use to scan film negatives. I had previously been working with this scanner on a Windows 7 PC. Using Image Capture, I am getting wildly different results -- the resulting scan is completely dark. Is there a setting that I am missing somewhere?
    I've attached a little preview picture that shows the difference between a scan of the same image, with my PC vs my Mac.

    There is no Epson scanner utility for Mountain Lion, it appears. Even Epson's FAQ defers to Image Capture and says it only provides software for image modification.
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=207953&foid=214278&cat=214269&subcat=214264
    Unfortunately Image Capture completely fails to provide the service it should be expected to. The 3rd party software VueScan seems like it would be adequate once I learned how to manipulate it a little more, but ultimately the only decision I can justify is to hook up the scanner to my Windows PC and use the TWAIN-based scan utility there.
    If there's anywhere I can make an official plea to Apple to get Image Capture in a workable state, feel free to point the way.

  • TS1394 image capture for Snow Leopard

    Which version of Image Capture should be in Snow Leopard Mac OS-X 10.6.8
    When my wife attempts to run Image Capture 3.0.3 on her system (her Imac cannot be upgraded to Lion unfortunately)  is unable to run.
    The error message is:  You cannot use this version of the applciation Image Capture with this version of Mac OS-X.
    Is there anyone out there who knows which version should be on her system please.
    Raymond

    For 10.6.8, Image Capture is version 6.0.1
    What your going to need to do is backup personal data off the machine and disconnect the drive.
    Pull out the 10.6.3 disk used to upgrade from 10.5 with, there is a bundled installer for programs, run that and see if that will update Image Capture.
    If not then your going to need to hold c or option key down to boot from the disk and install 10.6.3 over itself, it also installs the bundled programs.
    Reboot and immediately Software Update until clear, that will update OSX and bundled software to current versions.
    Some third party software won't function after this, they will have to be reinstalled and updated.
    You might also have other issues with that machine
    Step by Step to fix your Mac

  • Adding ZTIWipeDisk.wsf after image capture for reference VM

    Hi,
    For the automation of the reference VMs I want to add a task to run the ZTIWipeDisk.wsf script after the image capture is complete. This is because the creation of VMs is too "complicated" in this particular customer environment, so I want
    to wipe the disk to avoid the
    “Press any key to boot from CD or DVD….” message from derailing the automation for reference image builds/updates.
    I've added WipeDisk=TRUE in the customsettings.ini added a task at the end to run
    ZTIWipeDisk.wsf, but it doesn't run, nor does anything get logged, so not sure if it's possible to achieve.
    Has anyone tried this before?
    Cheers,
    Jeremy
    Jeremy Saunders

    Check the smsts.log file to confirm it was actually called.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Canon users, try Image Capture for cameras

    I have seen a couple of threads that cameras don't work. Mine didn't... I have a 790is. Just use image capture that is in your applications folder.

    If you have CanoScan Toolbox X installed (provided with the Canon 9950 Scanner) go to Advanced option after clicking on either the Scan-1 or Scan-2 button. To do this, Click on Scan in the popup menu that results from activating either the Scan-1 or Scan-2 button. This should put you in the ScanGear CS screen. On the right is a vertical menu bar. Click on the Advanced Mode and then click on Select Source. This gives you options for negative scanning.
    I found using the masks supplied with the scanner is helpful keeping the image square on the screen after scanned image is transferred to

  • How to automatically crop images in Image Capture for import into iPhoto?

    On my PowerBook G4 / Mac OS X 10.4.2, I'm using the Image Capture 3.0.3 application to capture images coming from scanning photographs with a CanoScan 8400F.
    Can I get the Image Capture application to automatically set the crop frame on the overview? Other applications do that, but with Image Capture it seems that after I do the Overview (preview), I have to manually set the crop frame by clicking and dragging, before I can click the Scan button to do the scan?
    P.S. It seems that iPhoto does not handle scanning, and you do have to use a different application to scan photos before importing them into iPhoto.
    PowerBook G4   Mac OS X (10.4.2)  

    If you hide the details pane Image Capture will scan immediately to a specified folder. Other way is to open printers and faxing from the system preferences , select the scanning tab of your printer and click Open scanner. It will start scanning immediately without opening Image Capture. To set other software as default you should open Image Capture, select your printer/scanner and click the scanner buttons. It will then let you chose which program should be launched when you scan a document.

  • Stop Image Capture from launching

    Image Capture launches whenever I connect a memory card. I knew I can disable the automatic launch in the preferences, but then it won't launch when I hook camera up. Is there a way to make sure it only launches when I connect a camera and not a memory card?

    Hi,
    just by pure coincidence I came across this article the other day which I think might be just what you need - http://lifehacker.com/5310161/cameras-improves-the-way-os-x-deals-with-connected -cameras
    Regards

  • Why did apple stop makeing ios for iphone 3g?

    i've been wondering why you all have stoped making ios for iphone 3's inpurticular because i can't get any up dateed stuff on my iphone?

    Because the hardware can't support it. The iPhone 3G is very old, it had to be dropped at some point. All later models are still supported as of now.
    This may assist in finding apps that work with iOS 4.2.1:
    Finding iOS Apps Compatible with Older Devices

  • Image Capturing for DnD via Robot

    Ladies n Gents
    I am attempting to enhance the drag and drop functionality of a certain jtable. Most of it works quite nicely, except, when I drag a row with no data; the image of the component physically under the jtable is captured and not of the row.
    For example, if the jtable appears on top of jbuilder, when I attempt to drag a empty row (row with no data), a portion of Jbuilder is captured.
    Is there a way to eliminate this unwanted behaviour? A related question may be, is there a way to capture a portion of the screen without using the robot class?
    Any links, ideas, suggestions are appreciated.
    Cheers

    thanks again for all the contributions.
    The beta player is a SONY BVW-75P.(http://www.videoplusfrance.com/fiche_location/134/magnetoscope--betacam-sp.htm)
    The video outputs i have at the back are:
    _1
    _2 (COMP/NON COMP)
    _3 (SUPER)
    _Ref Video
    _component 2 (Y/R-Y/B-Y)
    All of these are bnc outputs.
    I also have one dub/component 1 output.
    Audio is coming out of channel 1 and 2 of the audio output via xlr/rca adapters.
    I've started dubbing directly to DVCAM tapes because i still can't get the non-controlable device capture to work.
    i've looked as you suggested for an s-video output but can't find one on the deck. So right now video is outputting to the dsr through "Video output 1" with a BNC/RCA adapter.
    The dsr is set to video.
    As far as the beta deck settings go, i have
    TBC control set to local.
    TBC - bypass
    Video input - auto
    Rec inhibit - on
    Capstaan lock - 2fd
    Input select - composite
    The firewire works with the dsr no problem. I can capture the DV tape is just dubbed with no trouble.
    But just still can't capture now directly from the betasp deckk.
    cheers,
    tee.

  • Image capture for Imovie

    I'm looking for a tool to capture video from the net and allow me to edit
    it in Imovie. I've heard about flip 4 Mac, and Quicktime pro but I haven't tried them 'cause I'm a bit jaded. I'm not opposed to spending a little $ if the solution really works.
    And.....I was wondering about an audio microphone for Mac. In voiceover, the built-in mic produces a quasi-cheesy sound quality. Any suggestions?

    I'm looking for a tool to capture video from the net and allow me to edit
    it in Imovie.
    ... ehm, well not easy to answer... unluckily, there's no universal web-video format... actual counting: >4000 (read:fourthousand) codecs "available"…
    sooo, what are the usual suspects?
    * QTpro handles the most "usual" on the web and the latest, e.g. as h264…
    * for conversion of mpegs WITHOUT loss of audio, you use the free tool Streamclip
    * wmv is popular in the PC world, flip4mac handles that.. (mostly… there are many wmv-flavors…)
    * divx/ 3vix / xvid … need additional plug-ins..
    * to convert .flv (as on youtube.com), you could use for free iSquint
    * … for some other you get plug-ins....
    … if no plug-in work, Plan B) is a screen recorder as SnapzPro , but tricky to handle, because you never "catch" the right size => another conversion step => loss of pic quality…-
    I would still have to convert any clips to a format compatible with IMovie? What format is that?
    sure, iMovie is no all-purpose-all-kind-of-file-edit app... , iMovie is a video edit app meant to work with firewire connected miniDV camcorders, so any content HAS to be "dv"…
    sorry for long post, but video from the net is no trivial issue...
    helpful?

  • Image capture for web-browsers out-of-the-box -- really no hopes?

    Hi all,
    I planned to extend user's interface for my web2.0 app with a webcam. It looks for me like JMF is the only framework, which promises a multiplatform usage for web-surfers. Therefore, I tried some JMF code and some JMF samples already. However it looks for me now like one should rather forget about the installers providing an "out-of-the-box webcam support ready for housewives". I'd wish i am wrong.
    Would you believe one can really make a simple installer enabling browsers like firefox, ie, safari and opera to upload a webcam snapshot by a single mouse click?
    Thank you for your hints and comments,
    have a nice day,
    Valery.

    hi cat2014,
    Welcome to the forums and sorry to hear about your sound trouble.
    To check what's going on, can you provide these additional info:
    1. What's the model of your lenovo unit (eg. Y50-70)
    2. When you play a music file (ie. iTunes or YouTube), is the volume fluctuating but there's no sound comming from the built-in speakers?
       - Link to picture
    If the speakers are enabled and the volume is fluctuating, this means that the sound adapter is okay and there's most likely a problem with the speakers. To check, try to:
      a. Use an earphone or an external speaker and observe if you can hear a sound
      b. Press the Windows Key +X and choose Device Manager. On the Device Manager window, navigate to Sound, video and game controllers and uninstall the sound adapter (ensure that you delete the device driver). When finished, do a scan for hardware changes. Windows will now use a generic sound driver and observe if you can how hear a sound from the built-in speakers
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for