Stop in timeline - don't show all layers. How?

I am an experienced AfterEffects, FCP, and Camtasia user, but new to Captivate. Currently using Captivate CS5.5 and cannot figure why Captivate shows ALL the layers of content when the playbar stops rather than only the layers active at that point in time. Is there a way to defeat this behavior? This driving me absolutely NUTS!! Can't find the answer in other resources. - Thx!

Hello,
When editing the slide, you'll see all the objects that are on that slide. When you drag the playhead you'll see only the objects that are active at that point, but when you let the playhead all objects will be there again. Sorry that is the way CP is designed. This dragging is not creating a real preview, which needs a temporary creation of a SWF. That is only possible with real preview modes (F4, F8, F12). Captivate is not a video application, like Camtasia or AfterEffects. It has advantages to have all the objects visible like for aligning purposes; forget about the pure video where manipulating different objects is not at all easy. If you want to align the start of an object timeline with the playhead, use CTRL-L. Perhaps my blog post about the timeline will help you, it is aimed at starters in Captivate:
TinyTimelineTidbits
Lilybiri

Similar Messages

When i log onto the internet a box come up on the bottom "show all content" how do i stop this

When i log into windows a message comes up on the bottom of the screen "SHOW ALL CONTENT" how do I stop this message from coming up it is so annoying.
This question was solved.
View Solution.

Hi,
Close any open Internet Explorer windows.
Open windows Control Panel, open Internet Options, click the Security tab and click Custom Level. About half way down, under the heading Miscellaneous, there is an entry for 'Display Mixed Content' - click Enable and then Ok, then click Apply and Ok in the previous window.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Show all layers CS5

How do I show all layers as visible? If I have sub-layers turned off, they don't turn on when I use show all layers.

Works for me.
Hidden objects aren’t displayed by this command, only hidden layers and sub layers.
Show all layers can be found in the layers flyout menu, only can be found if you have a hidden layer.

I "showed all Bookmarks" how do you close "show all bookmarks" ???

I hit the "show all bookmarks', how do minimize them again.

There should be a close X in the top right corner of the Bookmarks Manager (Library) window.
You can also use the Ctrl+W keyboard shortcut or look at the bottom of the Organize menu.

Indesign CS5.5 can't select objects, they don't show in layers panel either

I received an .indd file from a client. There are certain objects that I can't select. I know they aren't locked because I can't select "Unlock all on spread." The weird thing is, the objects don't show up in the layer panel. If I uncheck the layer's eye, they disappear. But if I uncheck the eyes of all the individual objects within the layer, the objects I can't select are still visible. I'm attaching a screenshot. Can someone help please?

The items are on a mster page.
In the Pages Panel, go to the master associated with the page you're on, there you'll find the things you're after.

OVI don't show all phone numbers

I have a latest version of OVI Suite, PC Suite and Nokia 2700. In phone I added a contact with 3 phones type "Work" or "Mobile" (not important). But PC Suite and OVI Suite show only first phone number (only 1 phone number in each category/type). In my contact list over 200 records and it is very inconvenient to edit this list in phone, but in PC I can add only 1 phone of each category on 1 contact. How to bypass this limitation?
Sorry for my English, plz. Thank you.

THIS IS A BUG starting with IOS7. I wish to god I had waited to upgrade --waited a year.
I have the same issue, Jeffrey Lee4. My car music system ignores the "show all music" setting and of course it should not. Do I need to actually explain that if you do not want to "show all music" on your phone then you do not want it on your car music system?
Apple seems unaware of this bug and I don't see it getting fixed anytime soon. The problem is that when I am driving down the road, I do not want to sort through hundreds of songs looking for what is actually on my phone. I don't like taking my eyes off the road that long. I bought an iPhone primarily so I could play my music especially in my car. My iPhone has become just a phone.

The database migration report don't show all the erros at creation time

Hello experts,
I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
Another question: how to list the objects that the tool was unable to create in the oracle model?
best regards

HHerrera,
Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
Regards,
Turloch

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Addresses in mail don't show all that are in Address Book?

I have about 25 names listed in a group in Address Book. When I access this group in Mail, only 8 are shown. Any ideas how I can get all 25 as they used to show up in Mail and now don't.

Same here... When I receive invitations in mail (from either Outlook or other iCal users), the "automatically retrieve invitations from mail" no longer works since upgrading to leopard. Works on my wife's system, however.
Also noticed that sending invitations to other users running Outlook no longer works if they are in the Outlook client, but works if they are using the web interface to exchange. Very strange.
So close to making the Mac able to play nice with the office, but yet so far... I am not going to pay $400.00 for Office 2008 for Mac either.

How can I show all layers?

I have worked on a image, adding color, images, and type, each of which appeared as a separate layer. But when I was done, only the final image appeared--a single layer. I need to delete one of these layers. How do I display it in the column at the right? (I['m using Photoshop Elements 8.)

Hi Barbara--
No, I didn't save it as a JPEG. I saved it as a psd......
Thanks anyway.
Dan

Ipod 5th will stop in middle of playing, showing all songs as -0.00.

How can I get this ipod to play the songs short of going through itunes to reinstall everything?

mpcmt wrote:
Thanks for the info. I tried both links but could not find an answer to my problem. *Is there anyone else out there who has the same problem?*
I guess not!
I sent this ipod in once to Apple and they said there was nothing wrong.
take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you. *Show them* exactly what you are talking about.

My clips in the timeline don't show the adjustments pop-up menu

can anyone tell me how to reveal it

I didn't notice those little arrows were removed - it was one of my feedback requests to get rid of them. Yay.
Not just visual clutter, but clicking on them accidentally, when you just wanted to move or select a clip, was all too easy.

My printer (HP8500) is wi-fi connected to my imac and my macbook. works fine from macbook, but has stopped working on the imac--shows offline. How can I fix this? Thanks

I have an iMac and MacBook Pro, both running Snow Leopard at current maintenance levels. I have an HP8500 printer connected via wi-fi. All have been working well until just recently. Now, the iMac cannot communicate with the printer. The printer icon shows offline. The printer is still online to the MacBook. I suspect a related problem is that when I try to access files on the MacBook from the iMac, I get a message that they are unavailable, but re-clicking once or twice to re-try works and the files are accessible. The only problem is that I cannot modify them from the iMac, even though the sharing options are set for update capability.
Resetting the printer and re-booting the iMac don't help.

Yosemite is a big problem.
I recommend you factory reset the TC and start over.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Redo the setup from Yosemite.. it needs to be directly involved in the setup to remember anything.
Please use short names.. no spaces and pure alphanumeric. eg TCgen5 base station name. TCwifi as wireless name.
Set password WPA2 Personal security which is pure alphanumeric mixed case and numbers.
Please empty out all the old wireless names from your devices.. reboot them and rediscover the network.
If it still fails tell us.

My iphone 5s screen has stopped working for no reason at all? how can i fix this?

I was using it fine then locked it and tried to use it 5 minutes later and it stopped working? any ways to fix this or do i have to go onto an apple store?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

Stop in timeline - don't show all layers. How?

Similar Messages

Maybe you are looking for