Stop Insertion Process

Whenever I drag a clip into my timeline, FCP has this irritating habit of splitting the track below it, and I cannot seem to stop it. All I want to do is drop in the shot into an empty spot--leaving the other tracks alone.
Is there a preference I can choose to stop this behavior? The only way around this is to drag the clip to a no-track zone and have it create a brand new track. Then I can move it accordingly, but I would rather not have to do this. Any help would be appreciated.

Ditto what Jim said. But to answer your question... When you drag your clip down, you will see a little arrow either pointing down or to the right. If it pointing down then you will be doing an overwrite edit(what you want). If its pointing to the right you will be doing an insert edit which will push everything down.
I believe the closer you get to the bottom of the track you want to drop your clip on the arrow should point down. If you're in the top 1/4 of the track on the timeline you will get the insert arrow.
But it really is much more efficient to learn those shortcuts. I, O, F9, F10, and F11 can be huge timesavers when used properly.

Similar Messages

How to stop a process from running and display a message

I have a button that inserts data into a table based on bind variable selected on the page. I would like to add code to that button that will check to see if certain data already exists in the table, for that bind variable, and if that data already exists, stop the process and display a message that says "you have already inserted that information - bla bla bla". If not, continue inserting. What would be the best way to do this?
Currently, the button is a plsql that inserts the data.
Any help or examples would be greatly appreciated!
mholman
Edited by: user10488561 on Jul 27, 2009 8:48 AM

Use a validation process for that. If the validation fails (data exists) the processes will not be run. If it doesn't then the processing will continue.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

How to Stop The Process of oRecordSet.DoQuery()

Hi all..
I would like to ask 1 question.
When program is executing the query passed as a parameter to oRecordSet.DoQuery(), is there any way we can stop the process by clicking on cancel button or other events?
thx.
regards'
erwine

Hi all..
thx for your quick replies.
Coz currently im doing SDK module which requires to process alot of data..and the process of inserting and updating to DB is kinda complicated. So basically, i use transaction to start and when i encounter error, i will rollback.
Let's say if client run the program and suddenly realized that he/she gives wrong input and wants to cancel the whole process.What can i do? Client may say that button 'Cancel' is actually quite confusing because cancel is self-explanatory term to cancel process, but in SAP BO, it's actually to quit the form.
I once thought of using thread, however, the event to trigger thread to stop will have to wait until the process done. so it's quite complicated

How to stop the Process Chains?

Hi Everyone,
   I have a process chian which is running daily, but i want to stop in a particular day( for ex on wednesday).The process chain has to run on remaining days.So how can i stop the process chain on the particular day. Please do answer me.
Thanks
Veerendra

Hi Virendra,
After start process , insert a node of abap program and insert program with following code .
Report zntest.
data : lt_attr like CASDAYATTr occurs 0 with header line.
CALL FUNCTION 'DAY_ATTRIBUTES_GET'
EXPORTING
   DATE_FROM                        = SY-DATUM
   LANGUAGE                         = SY-LANGU
TABLES
    DAY_ATTRIBUTES                   = Lt_ATTr.
write : / lt_Attr-WEEKDAY_L.
read table lt_attr index 1.
if lt_Attr-WEEKDAY = '3' . "3 Stands for 3rd day of week i.e. Wednesday
message 'Process chains not to be run on wednesday' type 'E'.
endif.
Make sure that this ABAP program is linked to other processes only on "Success",
Hope that helps.
Regards
Mr Kapadia

How do i stop two processes that are running in activity monitor

how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

Select each one and Force Quit it.
But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
regards

How to stop message processing based on validation?

Hello experts,
I have a requirement to stop message processing in the graphical mapping based on validation results. Here is the scenario - messages are translated using graphical mapping and sent to the target system. An RFC lookup will be done to ECC to determine if the data in the message is good. If the lookup returns a negative result, message processing should be stopped right there.
I guess we can throw an exception from the mapping to force a failure and stop further processing, but that will cause the message to show up as failed on SXMB_MONI and cause alert emails to be sent out in PROD. Another option will be to supress creation of the root node itself, but I think the message will then fail in the subsequent "call adapter" step if the target schema has a min occurence of 1 for the root node (as in the case of IDocs).
Is it possible to do it without using BPM?
Thanks,
Michelle

Hi Michelle,
If your requirement, to stop message processing without sending an alert?
If yes, then you can have a alert rule, not to trigger alerts on a failure (And to raise an exception based on the result from RFC loookup).
If your requirement is not to make the message fail, then you have to go for the ccBPM route.
Best Regards,
Ravikanth Talagana

Not able to stop OPMN processes using OPMNCTL on AS 10.1.2.0.2

Hello,
When trying to stop opmnctl processes using opmnctl following error is coming
$ opmnctl stopall
opmnctl: stopping opmn and all managed processes...
================================================================================
opmn id=appsdev2.mpmkvvcl.com:6201
OPMN is terminating
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Unacceptable request: OPMN is terminating
HTTP/1.1 406 Unacceptable request
Content-Length: 168
Content-Type: text/html
<?xml version='1.0' encoding='ISO-8859-1'?>
<response>
<opmn id="appsdev2.mpmkvvcl.com:6201" http-status="406" http-response="OPMN is terminating">
</opmn>
</response>
$
I also tried opmnctl shutdown but still issue is same.
Please help thanks in advance

Looks like something may have been hung. Kill any process still running after a shutdown of opmn and then delete any left over pids files in the states directory. After that you can do a opmn startall.

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.

I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom

Unable to open PS Elements 11 once closed without Stopping the process in Task Manager

Photoshop Elements 11 will not open once closed unless I either stop the Process in Task Manager or reboot the computer. I have tried setting the program to run in Administrator mode but this did not work. I am running the program on a 64 bit Windows 7 laptop, the process I need to close each time is usually "Photoshop Elements Editor exe*32'?"
Can anyone help me please?

I have this problem intermittantly with Premiere Pro and have not been able to find a solution.

Cleanly stop a process in an XI adapter module

Hi,
I have a java adapter module that decides whether the process should carry on or not.
When I want to stop the process I throw an UnsupportedOperationException that is reported in Runtime Workbench -> system monitoring.
Are there any other means to stop the process (other exception....) from an adapter module?
Thanks
Yann

Hi,
I have a java adapter module that decides whether the process should carry on or not.
When I want to stop the process I throw an UnsupportedOperationException that is reported in Runtime Workbench -> system monitoring.
Are there any other means to stop the process (other exception....) from an adapter module?
Thanks
Yann

Problem in stopping the process for a while

Hi all,
I am facing problem in stopping the process when i call *.exe from java. here i am explaning my problem in detail.
main(){
m1();
m2();
m1(){
Runtime r=Runtime.getRuntime();
Process p=r.exec("solve1.exe");
// this exe file will create a text file (temp.txt), and it is creating it with out any problem.
m2(){
using temp.txt here.
problem is when i call m1() it will create temp.txt , but by the time i call m2() temp.txt is saving into the disk and m2() is not able to find the file.
here what i need is there should be some time gap to before i call m2(); and i tried even with
p.waitfor(); in m1() -if i use this the program is not exiting out of runtime??
any one kindly hepl me
bye.

A test app(if you don't have sol, then pick another app)
public class WaitForTest{
    private WaitForTest(){
        try {
            Process p = Runtime.getRuntime().exec("sol.exe");
            System.out.println("Waiting....");
            p.waitFor();
            System.out.println("Done waiting") ;
        catch(Exception e)
                e.printStackTrace();
        static public void main(String[] args){
            new WaitForTest();
}

How to stop a process chain tempararly

Hi
we have a process chain BI (7.0) which extracts data from R/3
scheduled everyday at 6AM. However, our basis team is
shutting down the R/3 server around this time for maintenance.
I want stop the process cain for this day and start regular
schedule the next day. Can some body please tell me the
steps involved in this process. we are using BI7
Thanks

hi srigant...
schedule your start process to run periodically (every day, hour, week...) at a particular time. If this schedule shall not be possible with the standard SAP scheduling, then schedule your start process to be fired "after event". Create an event in SM62. Then write an ABAP report raising this event with function module BP_ENVENT_RAISE. You can as well test this by raising your event manually in SM64.
so you need to write ABAP program for triggering an event based on the time and check condition...
hope it helps..
regards
ram'n

How to stop a process?

last time i selected all the files in a folder and expected them to open in one Preview window, but each opened a window and it took a long time. When this happens, how can i stop the process immediately?

Quit the application using CMD+Q. If that doesn't work, OPTION-click the app's Dock icon, and select force quit.

Stop Insertion Process

Similar Messages

Maybe you are looking for