Stop led when the battery discharge

when the battery discharge i my macbook 13 i don't see de led that it indicater the stop state. but when i connect the power source it returns on my last job. it's normal?
excuse me for the language....
by

Thanks - but it is not that simple. the sim cards are in the right phones. my phone recieves calls most of the time, but if it not available then my wife's phone picks it up. we have turned off blue tooth and hot spots and turned phones on and off and this seems to temporarially solve the issue, but then it reoccurs. it did not happen immediately after her sim card was in my phone - it is more recent. we do not have call divert on. it is just odd.

Similar Messages

Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.

Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.

You can leave the charger plugged in, as you cannot overcharge...charging automatically stops when your battery is full. Once every 2 ~ 3 months, its a good idea to drain the battery to about ~ 40%, then recharge to full. Otherwise, you can charge whenever you like & leave connected whenever you like.
Try to avoid full battery discharges, Lithium batteries don't like that & frequent full discharge/recharge cycles will eventually kill your battery.

ZBook 17 powers on automatically when the battery is removed and placed back

Hi all,
I am an IT engineer with a 15 years hands on experience and troubleshooting skills.
2 of the laptops I own are ZBook 17.
One is a UK import (F0V53ET, manufactured in October 2013) and the other is a US import (D5D93AV, manufactured in April 2014). Both of them are running the latest BIOS revision (v01.21).
The strange problem I encountered is as follows:
At the D5D93AV when the AC and the battery are removed (i.e. for upgrading the RAM), when the battery is placed back in, the system automatically powers on. Same applies if there is NO battery attached and the AC plug is attached.
At the F0V53ET, this does not happen (and the normal is NOT to happen).
What I tried to do so far to see if the problem is resolved at the D5D93AV:
1) I upgraded the BIOS to the latest version (v01.21) at both the ZBooks.
2) Ensured that BOTH the laptops have exactly identical BIOS settings.
3) Ensured that turn on the machine while on AC is UNCHECKED.
4) Ensured that there are no power on options enabled (like the timed power on, e.t.c.)
5) Tried to disable settings like "USB charge, wake on USB" e.t.c.
6) Tried to remove the CMOS battery, press the power button with no battery or AC to fully discharge, attach the CMOS battery after a minute to ensure the CMOS was cleared and placed everything back.
7) Tried to replace the OS from Windows 8.1 Pro to Windows 7 Pro to see if it has an impact to the UEFI Bios settings (i.e. any conflict with Hybrid sleep e.t.c.).
8) Tried to enable "Power on while on AC" to see if the system behavior changes. When the battery is attached and the AC is also attached, it will power on if the "Power on while on AC" is enabled (so this works as expected).
9) The problem gets reproduced ONLY when there is either no battery and the AC is attached, or when the battery is attached without the AC (i.e. after reassembling the machine after a RAM upgrade). Then it powers on automatically.
10) I also swapped the batteries between the 2 ZBooks but the issue with the US model is not resolved either. The battery works fine.
It seems to be either a BIOS issue, or a Power Board issue (hardware fault). The UK model behaves as expected, while the US model seems to have these issues.
Any ideas will be really useful.
So far this is what I did not try yet (due to lack of time):
11) To attach the US model to a docking station and see how it behaves.
12) To disable or enable the Hybrid sleep from the Bios (instead of leaving this to AUTO).
13) To replace the CMOS battery (swap them between the 2 Zbooks), although I don't think it might be the battery as the US unit is NEW with 12 hours of use.
14) To completely remove (or swap) the Optical drives and see if the problem still persists. I know there are some really rare occassions that the Optical drive might be partially faulty and short circuiting. It may sound crazy, but I have seen and experienced this more than 3 times espexially at desktop machines.
Any info or tips will be useful, although I am afraid I may have to escalate it to the 3rd line of HP as it is a really odd issue.

Hello, @panoulix
To get your issue more exposure I would suggest posting it in the commercial forums since the HP ZBook 17 Mobile Workstation is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP ZBook 17 Mobile Workstation.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Macbook resetting itself when the battery dies.

Hi all I am really hoping someone can shed some light on what’s happening to my Looney MacBook.
About two days ago I forgot to put it on charge when the battery was on 3% and it shut down, so I turned it back on when I had connected it to the power like normal and expected all to be okay. The computer had completely reset itself, time, date, Internet passwords, background everything. I put everything back to how it should and tried to connect to Facebook. The webpage was just the raw webpage, without its style sheet (is the only way I can describe it). So I was like okay that’s weird, and normally after a few refreshes it goes back to normal but it didn’t. It wasn’t because the Internet connection was slow either.
The next day it was still the same, deleted the cache reset everything on safari and restarted which seemed to fix it. I have just let the battery run down again (bad I know) and it did it all over again.
So I am turning to here to figure out what is going on! I hope it can be fixed, as I love my mac too much!
Appreciate any help!
Thanks

The next day it was still the same, deleted the cache reset everything on safari and restarted which seemed to fix it. I have just let the battery run down again (bad I know) and it did it all over again.
If you love your Mac, stop running its battery down the the point that it shuts off.

Helix keyboard stops working when dock battery reaches 3%

My other post has more details but the title says it all. My Helix keyboard stops working when dock battery reaches 3% even though the tablet battery has a charge. This seems to happen every time. A hard reset of the dock gets the keyboard working again. Any ideas on how to fix this?

This is my daughter's college computer so I have not used it. I just get the panic call when it locks up.
Is there any way to get a warning when the battery is low? I assume that it has a light on the base but I can see how she could miss it when focused on what she is doing. I am not sure it comes on since the tablet battery still has capacity. I find it odd that this happens when the tablet battery still has a decent amount of charge. Effectively it eliminates a fair amount of the battery capacity available for the computer.
I have other electronics that force you to shut done at low battery levels. I am surprise that a high end laptop performs this way.

I use my 7th gen ipod on bluetooth and when the battery dies while on bluetooth it wont turn on or charge and the computer doesnt find it. This is my 2nd nano in just over a month. The first one had the same problem. how can i fix this?

I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?

If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.

My phone seems to delete contacts and info when the battery gets low, is there a solution to this issue?!

After the most recent update, I've noticed a couple MAJOR changes! 1) The battery life can barely make it through half the day. I have to keep charging it no matter how little I use it. I've even turned off apps running in the background, it didn't make much difference. And 2) When the battery gets really low, at the 10% mark, it deletes contacts and settings. I've lost so many contacts all of the sudden and I constantly have to restore my iPhone. It's so frustrating! And when the battery gets low, it also deletes my e-mail account to receive e-mails on the phone. I'm tired of having to constantly reset my phone carry a charger with me, it's not reliable any longer and I'm not sure why. Help??

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen.

Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.

Drag the file into the audio window in the Document inspector...

When the battery of my macbook pro is finished, the computer shuts down and I have to turn it on again

Previously when my macbook pro battery reaches 0%, the computer entered hibernation state, and when connecting the power adapter a progress bar appeared and appeared my content as it was when turned off.
Dede a while back when the battery is depleted macbook off, and when connecting the power adapter I have to press the power button and the machine starts again and it was kept open applications or files that were in use.

You should not be completely draining your battery as normal use. I'm not sure if I'm following you correctly, but with a complete drain it is expected to have to hit the power button to activate the system.
Two good things to read:
Apple Portables: Calibrating your computer's battery for best performance
http://support.apple.com/kb/HT1490Apple notebook batteries – maintenance and troubleshooting

How can you tell when the battery is fully charged?

when done syncing, i have a totally green large battery icon- but thats what i always have- any other indication- or am i misreading the large green battery as an indicator to charge completness?
the little white battery icon never seems to change when using touch 2g?
what am i missing please
thank you very much
bob donchez

The small battery symbol has a lightning bolt symbol when the battery is charging and a electrical plug symbol when it is completely charged.
There are pictures in the users guide, page 27: http://manuals.info.apple.com/enUS/iPod_touch_2.1_UserGuide.pdf

Hi, I would like to ask you a question. a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day iphone is operating normally, but when the battery is empty, unfortunately I can not charge additionall

Hi,
I would like to ask you a question.
a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day my iphone is operating normally, BUT when the battery is empty, unfortunately I can not charge additionally my iphone with the "extra battery case".
Does that mean that you did not even create a new software that supports additional battery case or it is something else?
I need your help!!,
Thank you in advance.
Sincerely,
VK

The Mophie Air is a good battery case, but doesn't offer the protection she's looking for. I suggest sticking to the Lifeproof, the iPhone has a very good battery (2-3 days moderate usage for me).
To your 2nd to last paragraph, that is false. Verizon is allowing exisiting customers to keep Unlimited Data - but will lose it once they use a subsidized upgrade. So if you buy a 4S (or LTE device for example) outright, you will keep unlimited data. Mobile hotspot may use up a bit of data, but it is a separate add-on/feature. The new Family Share plans may change that, so it's one giant center of data all devices use.

Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?

Hello!
I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
Thank you!

Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.

What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS3700 music stops playing when the screen goes dark, but the earbud jack is flush with the iPod. The Jack is hard to push in now. what is the problem?

Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?

And you are positive the white part of the headset is flush with the body of the Nano?
Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
B-rock

Stop led when the battery discharge

Similar Messages

Maybe you are looking for