Stop markers that work under conditions?

I want to share a project as DVD and/or WebDVD. I have created a menu, I have placed proper Scene Markers, and I would like to place Stop Markers as well, but I want these Stop Markers to operate only when I visit the respective clip from DVD's menu (select scene option), and not to operate when I view the total movie (play all option). Is it possible? I use PrE9.

Neale,
Thank you for that information.
I have not used DVD Architect, as I have Adobe Encore. In that full-featured, authoring program, I would just do a Playlist for my Play All, and possibly Chapter Playlists, for my Chapters, if I did not have them on separate Timelines, as is my normal workflow.
Encore does not use Stop Markers, per se, but Timelines, Playlists and Chapter Playlists have End Actions, which can be set to many parameters. Tons of almost infinite control.
Always have to ask about capabilities and workflow, when discussing DVD Architect. I need to get Steve's book, even I just keep working with Encore, which I plan to do.
Does DVD Architect have a way to provide the viewer with non-linear control, like the Encore Playlists and Chapter Playlists?
Appreciated,
Hunt

Similar Messages

  • How can i close a windows application that works under vmware in am applescript

    Hi there,
    On my roof I have a set of solar panels. The daily score of these panels are only visible by using a Windows application.
    So I use vmware on my Imac to start Windows 7 on Bootcamp, this all by using a applescript in the automator app.
    In the script vmware is starting up and then i made a task in Windows that starts up the specific application after the Windows startup. After a delay of 180 seconds the script fills in a password an gives a return. That works well.
    Unfortunately it runs perfect the first tim a and then the second time, the specific application does not start. Only Windows starts up, the rest of the script does not work the right way, exempt closing the vmware, that goes as expected. So I think that the closing command that I give in the script:
    tell application "VMware Fusion"
    quit
    end tell
    causes a problem. The closing of the application within Windows is perhaps not done on a proper way.
    Therefore I am looking for a way to close that application first and then closing Windows 7 and then VMware.
    Thanks in advance for your help.

    As a completely different approach, I'd have a look at the raw network traffic with tcpdump or equivalent, and see if I could figure out how to access this data — if you're lucky, it's a fairly standard interface of some sort; HTML queries, possibly. 
    Start with a port scan of the controller for the panels (using Network Utility.app in OS X, or another tool), and see what IP ports are open and active.
    Is there a vendor and model associated with the controller for the panels?  That might turn up some software other than this Windows application/

  • Is there a version of techtool deluxe that works under Lion?

    Title says it all - wondering if there's a Techtool deluxe for Lion yet that I can get...

    Yeah, that's the 'Techtool Pro' version, but up until recently anybody under applecare could get a free version of the software (still from micromat) called 'Techtool Deluxe'.  The link that used to work to download this directly from Apple (http://support.apple.com/techtooldeluxe/) now gives some sort of recursive link error instead :-(

  • I used to have a vi "Beep+.vi" that was able to make a beep with different frequence/duration on WINDOWS 3.11. It worked with the systemspeaker (no soundcard). Is there a similar vi that works under WINDOWS NT?

    Kaba Gilgen AG
    Prüffeld
    Christian von Allmen
    Freiburgstrasse 34
    CH-3150 Schwarzenburg
    Switzerland
    tel: ++41 (0)31 734 43 02
    fax: ++41 (0)31 734 43 79
    mailto:[email protected]

    "Beep.vi" has not worked on my PC for as long as I can remember (First Win95 & now Win98). I decided to track the problem down. I started with the NI knowledge base article on the subject and looked into my "Sounds" control panel and found that I did not have a "Default sound" event at all! I checked another PC and it did have this event, so on that second PC I searched the registry, found where "default sound" existed in it and exported that section of the resistry. I then compared that exported section with the registry on the machine that did not have the event and determined the differences, created a ".reg" file to correct the machine and merged it into the registry. Now it too has a "Default Sounds" event and the "beep.vi" works.
    The "Add
    default Sounds.reg" file that did the job for me is attached
    Attachments:
    add_default_sound.reg ‏1 KB

  • Anyone have a Nokia phone that works under Arch [Linux!] ?

    Hi,
    Just got myself a Nokia N95 would like to get it hooked up via usb
    Bus 002 Device 002: ID 0421:0070 Nokia Mobile Phones
    shows up in lsusb but gnome does not mount it
    It is possible even if I can get transfer to phone memory?
    Thanks
    MrG

    It turns out that N95 is not supported by gammu or gnokii atm.... I can use bluetooth although Its a little hit and miss but I have manged to get usb connection working which means I can transfer files to and from phone...
    Well its a start :-)
    Last edited by Mr Green (2008-04-23 15:21:38)

  • Video Doesn't Work Under 2.0

    Videos that worked under the oriignal OS now fail to play with the update to 2.0 When I try to play the movie, all I get is one of two messages:
    An error has occurred
    or
    Free up resources by closing applications.
    Plase tell me how to fix this. Playbook without movies is pretty ordinary.

    I had this. I have a 16GB playbook which means it starts with less than 12GB when first set up with OS2 (problem no. 1).  I then added a 3.5GB wmv video which played. Then added a few more videos much smaller and the big one will not play. I can only assume 7GB free disk is not enough workspace to play it, or it's another bug. Try freeing off space by deleting all but the one video and report back.

  • Message.saver is not working under 10.6 - anybody know of an alternative?

    Message.saver 1.5.2 (http://www.apple.com/downloads/macosx/icons_screensavers/message.html ) is not working under 10.6. It is a screensaver that allows you to put a text on the screen as the saver kicks in. IMHO a excellent piece of software that worked fine under 10.5 but not under 10.6.
    Does anybody know if there is something like it? and that works under 10.6?
    Thanks.

    Hi
    i have the same messages on 10.6.4 and with the sonic xx170:
    28.06.10 11:39:04 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:07 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:08 racoon[489] IKE Packet: receive success. (Information message).
    28.06.10 11:39:10 pppd[488] IPSec connection failed
    28.06.10 11:39:10 racoon[489] IKE Packet: transmit success. (Information message).
    28.06.10 11:39:10 racoon[489] IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
    any ideas?
    waiting on 10.6.5, 10.6.6 ....?
    regards, Arthur

  • Samples don't work under Oracle 10g w JDeveloper 10g

    I have downloaded and attempted to use 3 different samples, and not a single one of them works properly without modification. These were all developed a couple of years ago, probably tested under earlier versions, but do not work under the most current. Does Oracle have any plans to update these samples to work with the most current products, or would the company rather leave its customers frustrated?
    For reference, I am running Oracle 10g (version 10.2.0.1.0) on a Windows 2000 workstation. I'm simply trying to set up a demo application, so I haven't put it on a more powerful server as of yet. I am using JDeveloper 10g (version 10.1.2.1.0 build 1913). The three samples which I have tried to use are:
    Oracle Label Security - Illustrating Ols Function API
    Oracle9i JDBC Sample OCI Connection Pooling and Middle-Tier Authentication Sample
    Oracle Connection Cache Sample Application
    The OLS sample does not even compile properly if not modified. It is necessary to add "jsp:useBean" declarations in order to get past the compiler errors. The documentation for this is also in error. The text describing the application indicates that Figure 3 will show the details for EMP_OPN (the same as for Figure 2), but the actual figure shows the deatils for EMP_RESCH. Thus the resulting discussion and the figures do not match. At least I could finally get this application to work.
    The other two I have not yet figured out the proper drivers or calling sequence. The drivers that work for the first application do not work for the latter two, or the calling sequence are wrong. I get lots of connection errors, loader errors, and others. I am about ready to give up on using the samples, as so far they have wasted more of my time than they have helped.
    All I want to achieve is a demo that shows a database that uses connection sharing or pooling (for performance reasons), does middle-tier authentication, allows the application set a user context and then make database queries, having OLS enforce the access control policy based on the user context (vs. the user used for the shared connections). If there is other sample code that demonstrates this that works under the configuration described above, I would most greatly appreciate knowing about it, or receiving such sample code via email.

    Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
    It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
    Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
    That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
    Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
    If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
    What happens if you ask for a simple image like
    http://URAN:8080/i/bottom_left.gif

  • Numpad stopped working under gnome

    Somehow my numpad stopped working under gnome. It does work under GDM etc so somehow a setting must have been changed.
    Problem is, I can't find that setting  :x
    Someone any idea before I start deleting my gnome config files ?

    You can just copy your files to other location
    btw gnome (i think every gtk enviroments) uses keyboard settings from xorg.conf - maybe somethig is wrong with that file? Look at this, but i think first you may copy your gnome configuration to other place so you'll be sure if that is in your config or it is system error.

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works.  However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled.  Help!

    The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works.  However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled.  Help!

    It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
    Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
    Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
    jake

  • My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desktop.

    My external HD stopped showing up on my desktop, but shows up in my Disk Utility..
    I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't.
    Either way, it wont eject or mount, and still doesn't show up on desktop.
    There are no ticking noises coming from the hard drive, and it lights up still, and i have tried replacing the cords, and restarting/shutting down the computer, and have tried it on a mac desktop also - same problem.
    Any help would be great!!!

    and have tried it on a mac desktop also - same problem.
    Try this on one of the Macs ...
    Open a Finder window. From the menu bar click Finder > Preferrences
    Select the General tab then select:  Show External Disks

  • HT1923 This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

    This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users.  My iPhone 4 will now sync with iTunes both in its USB-connected  mini dock and over Wi-Fi.  It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process. 

    I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

  • My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

  • [svn] 4610: Commit Josh's patch for 3. x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil .toString() working with QNames.

    Revision: 4610
    Author: [email protected]
    Date: 2009-01-21 12:48:01 -0800 (Wed, 21 Jan 2009)
    Log Message:
    Commit Josh's patch for 3.x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil.toString() working with QNames.
    QE: Yes, please add a test case to ObjectUtil tests for this scenario.
    Doc: No
    Checkintests: Pass
    Bugs:
    SDK-17367 ObjectUtil.toString(QName) causes RTE
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17367
    http://bugs.adobe.com/jira/browse/SDK-17367
    Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.as

    VPN-User,
    Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.   
    Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those.   This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
    Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
    Thanks for your patience
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for