Stop Motion for Final Cut?

Hello,
I'm a stop motion animator and I am having the worst time ever trying to capture my frame by frame animated work in final cut pro. Every time I try to capture now, it will capture a little bit of the footage but once the animation starts (which i did stop, record, stop, record as fast as I could on my camera) it will stop capturing and say "searching for media" what am I doing wrong?

Please detail your workflow...
-What format is the media?
-What cam/deck are you capturing from?
-Is the animation already single frames on the media, or multiple clips of short segments?
-How did you acquire the animation on your media...in camera, exported out of another program?...etc
-If in camera, how did you achieve single frames...is that a camera setting? (some cams have this feature, others don't)
Have you tried Capture Now, using non-controllable device? (doing this will create new timecode, so you may not want to do it that way)
More info will help us help you.

Similar Messages

WHAT IS THE BEST VIDEO CARD FOR FINAL CUT PRO and MOTION?

Hello folks,
I have found a lot of posts regarding all kinds of troubles with ATI READEON X1900 video card.
When I talked to people from Apple, trying to decide which videocard to install in new MAC PRO, Ati Radeon X1900 was the one they did recommand for FCP and Motion. So are there any other cards which would actually suite better for Final Cut Studio2, or is Ati Radeon X1900 really the one to go with?
Thanks for any suggestions,
Kootenay

Techreport has some more information on the new 55nm Radeon (X3000) which should be another "mid November" releases, as well as an updated 8800 GT that still is under wraps.
So seems Intel and everyone else is trying to get new products out before the end of the year, if possible.
Drivers for graphics controllers may or may not need the work that sometimes seems to plague companies.

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove wires/rig? Are there any rig removal plugins for final cut pro? Thanks!

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove them? If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them. Thanks!!

In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this. But I don't know anything in Motion 4 that will do it. You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

Where I can find a free plugins for final cut pro or Motion

I will like to know if is a web site that we can donwload free plugins for final cut pro. I found some web sites but they jave some samples but when you loud these to final cut pro it will have the name of the company that sell it or is will say Exanple or Trila versiona a cross the screen.

go to proapptips.com (Dave Slater's FINE site) scroll down the page and look on the left site for links and follow through to plug in vendors. There are a bunch of freebies on various sites, all compiled by Dave, just for you.
Some of these freebies ask for a small donation. Worth it if you use them!

Is there a way to run Motion and Final Cut Pro on Separate Machines?

Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
-Matt

I do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!

Clean install Leopard or Tiger for Final Cut 2 on my g5?

Hi, I currently have the previous final cut on my g5, on a Tiger operating system. I just got the new Final Cut 2, and I'm going to do a clean install of the OS to have everything running as smooth as possible. Will Leopard speed things up (or slow things down) for Final Cut 2, or should I just reinstall Tiger with Final Cut 2?
Thanks

My biggest concern isn't rendering, it's overall playback performance in final cut pro.
Also, I'm curious as to how much slower motion 3 will be then motion 2 will be, and if motion 3 would run faster or the same in leopard and tiger. If I'm not mistaken I believe motion performance is quite dependent on the graphics card. I have an ATI 256 meg card that ran motion 2 acceptably in tiger, though I'm wondering how motion 3 in leopard will be in comparison (with the same video card and g5)
Thanks

Sharing stops at 33 % final cut pro x

Hi, i have a mac mini OS X 10.7.5, my video is 54 seconds long, 1080p Final cut pro x. I have tried to share as i have done in the past by sharing to master file but when it starts it goes well until it hits 33 %. I tried to upload to youtube and the same thing, stops at 33%. I tried to dvd and same thing stops at 33%. when i press Render All it stops and stops, i press Play but it stops and stops.
what can i do? I dropped the audio track and a couple of video tracks onto the editor instead of importing and thought that this was the problem but i have done videos before where i dropped tracks and they shared just fine, (perhaps mising link to video/audio file?
i am doubfounded and any help would be greatly appreciated. many many thanks in advance.

Hi Leavethegunand takethecannoliproductions,
I would recommend viewing the progress details to see if that helps indicate where the issue is:
Final Cut Pro X: How to view progress when sharing files
http://support.apple.com/kb/HT5614
To view the progress of shared items (entire projects, a selected range of a project, or individual clips), open the Background Tasks window. You can open the window by doing any one of the following:
Choose Window > Background Tasks
Press Command-9
Click the Background Tasks icon in the toolbar.
Beyond that, here are some basic troubleshooting suggestions for Final Cut Pro X in general:
Final Cut Pro X: Troubleshooting basics
http://support.apple.com/kb/ts3893
I hope this helps get you on the right track!
- Ari

Code for Final Cut Pro 2 not being accepted by FC Studio 2

I upgraded to OS X 10.4.11 from 10.4.2. The FC Studio 2 icon would bounce a few times and stop, but nothing else would happen. 10.4.2 was reinstalled, erasing everything. An attempt was made at starting FCP 2, but the OS is not finding the files necessary in OS 9.
Upgrades Final Cut Pro 4 and FC Studio 2 were made since purchasing FCP 2 as a full package approximately 7 years ago, but FC Studio 2 is not accepting the code for Final Cut Pro 2. How do I correct the problem short of buying the full FC Studio 2 or buying a new hard drive?
Thank you.

It doesn't make sense to me either. As Thomas stated, the crossgrade that required you to send in your old FCP install disc was for Final Cut Studio version 1 (which included FCP 5.1) - NOT version 2. And regardless of the fact that you sent in your install disc, you should still have the serial number for FCP 4. It was printed on two stickers that were attached to the "Installing Your Software" booklet that was included when you purchased FCP 4 (upgrade or full retail versions).
There is NO need to have the old software installed in order to install and upgrade to FCS 1 or 2. All you need is the serial number form the older version; you'll be prompted to enter it during the install process for FCS 1 or 2.
FCP 2 may install on an OSX version, but will NOT run on ANY OSX version - it only runs on a full installation of OS 9.
-DH

Help for Final Cut Pro X training book.

Hello everyone!
I've recently decided to study to get the Apple Certification for Final Cut Pro X level 1, so I bought the book "Apple Pro Training Series: Final Cut Pro X" by Diana Weynand. Due to a mistake of mine, I bought the edition released on October 2011, knowing later that there is a 2012 version and a new one coming out in just a month.
I'd like to know if I can still handle the exam studying this book released on 2011, or if I necessarily need to get the latest version coming out sooon.
Thanks in advance for your help!
- Alex

I understand. I don't feel like waiting so much time, so I need to choose.
1 - Start studying my old 2011 book since I have it here, and see if I can make it before the exam is updated (I have no idea how much time it'll take me to study the entire book though, even if I study everyday).
2 - Buy the Motion 5 book and get that certification while waiting for the new FCPX book to come out.
3 - Just waiting for the new FCPX book (which means wasting time waiting).
Thanks for your answers and patience.

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? i´m from Mexico i speak spanish

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? how i can install this app in Final Cut? this app cost me money and not is working to me, i am disappointed sorry if a write bad, i´m from Mexico i speak spanish

This is a user2user board for FCPX - maybe better you discuss your issues with the makers of that 'plug in'
Seems for me a bit 'fishy', isn't it? - other professional plug-in makers deliver with an installer... That advice at AppStore, how to install it, is ... rare:
How install it ? – click the launch button. Motion 5 will start itself. When Motion is open click save as. Write a generator name - Lens Flare and choose category RGB HOUSE or make it. Click Publish and you are done. If you don’t have Motion 5 look at support site - how to install in FCP.
How it works ? – In Final Cut Pro you will find in Generators RGB HOUSE group, where will be Lens Flare. Drag this generator above all clips in timeline. When it’s there remember to change blending mode to Screen (in video section). You can adjust color, steak color, glow, intensity, scale - apacity and blur of artifacts, position. Any parameter could be stored as a keyframe, so You can easily animate the flare.
so, I don't speak Spanish, lets have some fun with translate.google...:
Cómo instalarlo? - Haga clic en el botón de inicio. Motion 5 comenzará Misma. Cuando el movimiento está abierto clic en Guardar como escribir un generador de nombres -. Resplandor del objetivo y seleccionar categoría RGB CASA o hacerlo. Haga clic en Publicar y ya está. Si usted no tiene el movimiento 5 vistazo a sitio de soporte - cómo instalar en FCP.
Cómo funciona? - En Final Cut Pro se encuentra en el grupo generador RGB CASA, donde serán destello de lente. Arrastre este generador por encima de todos los clips en la línea de tiempo. Cuando es allí te acuerdas de que cambiar el modo de fusión a la pantalla (en la sección de vídeo). Usted puede ajustar el color, color carne, brillo, intensidad, escala - falta de definición apacidad y artefactos de su posición. Cualquier parámetro podría almacenarse como un fotograma clave, por lo que puede animar fácilmente la antorcha.
Hope it makes at last a little sense... I don't trust these automatic translators
(the German translation is ... awesome funny!)
Finally: it's from 2012! Needs probably an update - contact the dealer!

Where can I find a good, free effect for Final Cut Pro of electrocution?

Where can I find a good, free effect for Final Cut Pro of electrocution? I'm using it for a taser sequence.
Thanks!
Matthew

Open Motion, look for lightningin the generators. From there, it's a question of figuring out how it works and what you need to do to make it work for your sequence. That's about as free as it gets and it will ony be as good--even if someone else did the work for you--as the amount of time you're willing to invest.
bogiesan

Plug-ins for Final Cut Studio

Please post your recommendations for plug-ins for FInal Cut Studio (Final Cut Pro and Motion).

film leaders clips can be downloaded online if you dig around a bit ... Peter Wiggins has a nice Motion Template clock he offers for free (which is a bargain by anyones reckoning)
easy enough to create your own film leader style countdown with a few back to back text generators separated by clock wipe transitions
color bars can already found in your fcp video generators bin
color bars and a film leader style countdown can also be auto generated during output (print to video and edit to tape)
distort faces and license plate like they do on tv? ... ok i give up, what do you mean? if you mean you want to disguise them (Mosaic, Blur etc) then you can have a bash with my Region Blur plugin
Message was edited by: Andy Mees

An Excellent Tutorial for Final Cut Pro X

I am fairly new to Mac and I am learning Aperture and Final Cut Pro X.
Just wanted to share an excellent video tutorial for Final Cut. Its free but there is an "extended edition" of sorts for a reasonable price.
http://www.izzyvideo.com
Cheers!

I thought there would be some plugins for Quicktime, like Final Cut studio, which made from Quicktime---> Quicktime Pro. And under Final Cut Studio there was also some Protoolkit installed. No longer necessary?
I just want to be 100% sure, that FCP X and Motion 5 is a completely self-contained app, that need no installation. But up to now, nobody can tell me 100% if it really is so.
I thank you for your answers and hope that you understand my thoughts, about having a Dvd where I can install it from or where I can save the self-contained app, if it is so.

Looking for good "Lower Third" plug ins for Final Cut

Does anybody have any sources for good "Lower Third" plug-ins for Final Cut Studio?

Why deny yourself the joy and pleasure to create your own,
It is far easier and faster than it may sound. Use a combination of applications like Motion, FCP, AE, Photoshop etc.
Use the tools don't make them use you. Manuals, the forums and a few selected tutorials can help you if you feel not confident with any of the software mentioned, but if you are passioned enough there's nothing more rewarding that learning while nurturing your creativity.
Just thought you may want to consider that as an option,
Message was edited by: gogiangigo

Problems with Canon EOS MOVIE Plugin-E1 for Final Cut Pro

After about two weeks of using the Canon EOS MOVIE Plugin-E1 for Final Cut Pro, I've found some clips are cut short when they are transcoded to Prores and appear in the browser. Has anyone else had this happen?

Yes, just started using this and noticed pretty soon afterwards. Seems to happen when I start clicking around or doing anything that uses the processor more than just surfing the web, but that's just anecdotal. I immediately stopped and started using MPEG Streamclip, but I really want the timecode.
Most recently, I had Log and Transfer open, transcoding some 7D footage, and a few of the clips didn't come in—they were left with the red stop-sign symbol/exclamation point. When I clicked to "retry," it stopped importing the current clip and started on the clip I retried. I clicked "retry" on another unimported clip, and again, the clip import stopped and the new clip began processing. I let it go through and, after the checking the footage, I discovered it had been incorrectly named the first clip's filename! Needless to say, I hand-checked every file to make sure it was the right duration (a few weren't), deleted the files from the Capture Scratch folder, and reimported—making sure I didn't touch the computer.
I hope they fix this bug, whatever it is.
BTW, I've experienced it on two separate Mac Pros.

Stop Motion for Final Cut?

Similar Messages

Maybe you are looking for