Stop Navigating from Basicdata1 tab to Basic data2 tab in MM01/MM02

HI,
In MM01/MM02 after giving the 1st screen details and selecting basic data1 and basic data2 .
And navigating to the second screen there in Material Grp field is not a mandatory and if user does not provide any MATGRP it can navigate to the Basic data2 tab.
But now reqmt is to check the material grp is blank or old matrieal grp is entered. If user provides an old materila grp or blank in the field it should not navigate the user from Basic data1 to Basic data2 and should prompt an error.
Could anyone help me in achieveing this functioanlity.
Thanks.

Closed.

Similar Messages

How do i stop Bing from coming up in a new tab on Firefox?

So, I installed some software that made Bing default on all my browsers which i went back and manually removed, but the one thing i couldn't get rid of was Bing's website coming up on any New Tab I opened.
I looked all over this support forum, but finally found the answer I needed elsewhere. Any potential answers on here missed the point or were way overly complicated and closed from future answers. So I'm attempting to make a new thread, since the answer is simple and I nearly punched my monitor and how aggravated I had become. :P
Here's the easy solution:
- Open Firefox
- type "about:config" in the URL bar - obviously, you will be careful ;-)
- type "browser.newtab.url" in the search bar
- (you'll see under "value" that nasty bing.com address it keeps sending you too)
- right-click on the selection and 'reset' the entry
Result: you will get Firefox' standard tile configuration with most used URL's
Yay! Now go be free people!

Hi.
Thank you very much for that information, glad to see that your problem has been fixed.
What we may do is capture this in a Knowledge Base article to help other people that may have the same issue in future.
Freedom is good, freedom is very good.
Thanks again.

How can I stop ITunes from starting up on the Radio tab?

Hi, at my workplace web radio sites are restricted. I like to connect my phone to the computer to charge and to listen to my playlists through the computer's speakers. It also gives me the ability to control the volume and tracks with my keyboard or on my desktop without having to reach for my phone all the time.
So, when I am connected to the network and try to open ITunes it immediately crashes and I think it is because the Radio tab is activated on startup. If I disconnect from the network and open ITunes it works fine. I can then choose the Songs tab and reconnect to the network. Is there a way to disable the radio tab or have it start on another tab?
Thanks!

Go to Start>All Programs and look in Startup. iF iTunes appears there, remove it.
If iTunes is not in startup, do you have any iTunes widgets? If you don't know what they are you probably don't have any.
Some iTunes Widgets can be configured to start when you start your computer and that could cause iTunes to appear.

How do I stop Firefox from crashing everytime I close a tab?

Ever since I downloaded Firefox 4.0, it crashes anytime I close a tab or a window.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

When I open Firefox another tabed wed site opens aswell, I don't want it to how do I stop this from happening? So only one tabed home page opens?

when I open Firefox another tabbed wed site opens as well, I don't want it to how do I stop this from happening? So only one tabbed home page opens
== I bookmarked a sight

I'm sorry I've never done that before - just tell me how to reach about:config!
Karen

How do i stop firefox from opening multiple tabs on startup

on startup firefox loads my home page and opens a new tab how do i stop that from happening

Do you have a MySearchDial extension showing in Firefox/Tools > Add-ons > Extensions?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Can you post the content of the user.js file in the current profile folder?
You can open the user.js file for inspection via the right-click context menu (do not double-click the file).
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)

How do I stop firefox from switching to new tab when opening bookmarks in new tab

When I open a link in a new tab it does not switch to it automatically. I had to reinstall firefox to stop it from switching to new tabs automatically since the option being unticked didn't stop it from happening anyway. Now only when I open a bookmard in a new tab it still switches to the new tab and I do not want it to. Why is it doing this with the option unchecked and a fresh install with no add ons of any sort? And how do I make it stop?

Try to set the Boolean pref browser.tabs.loadBookmarksInBackground to true on the about:config page.
*http://kb.mozillazine.org/about:config

Stop safari from opening in new tab or window

Ok so just installed some update to my mac book pro OS X 10.9.2 and now I dont see how to stop safari from opening new tab or windows when I do a search in yahoo and I click on a item it opens in a new tab or window. Under the preferences and tab options I dont see how to just get it to open on the current tab or window. It drives me crazy to have a bunch of tabs or windows open.
Thanks

I tried that and still the samething a new tab opens. Its seems from the options there is no option to no allow this. Any other ideas?

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling, but it is no longer installed as an add-on

I downloaded iMesh and I can't stop it from automatically popping up each time I request a new tab. I have uninstalled the program, but I want to stop it from defaulting as a new tab. I tried uninstalling the add on and plug in, but it is no longer installed as an add-on or plug in. How do I get the "new tab" request to simply open with a blank address in the address box instead of www.imesh.com.

Ok, I finally managed to get rid of it.
First I did the thing with the about:config but I flitered for imesh instead and managed to reset two thing but when I got to the keyword.URL I got the same thing as lolbabe98 did with the "An attempt to change your search engine or homepage was blocked."
Then I did a search on my C: drive for iMesh and discovered some things that hadn't been removed even though I had unistalled both the toolbar and the actual program. After that it worked fine and I now have a regular "untitled" tab when I open a new tab.
One last thing, when I tried to remove some of the files there was one that said it was in use, it was called datamanagerUI or something rather. The only thing I had to do there was to open Task Manager and kill a process called DATAMN~1 and I was able to remove it. Hope this helps.

I just updated to 9.0.1 and now I get 4 tabs opening every time. (Welcome to Firefox, Mozilla Firefox Start Page, Plugin Installed & The Personas Interactive Theme) I can not stop them from opening.

I just updated to 9.0.1 and now I get 4 tabs opening every time. (Welcome to Firefox, Mozilla Firefox Start Page, Plugin Installed & The Personas Interactive Theme) I can not stop them from opening. Please advise.

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Problem in Navigation from one tab to another

Hi All,
In my forms, I have three tabs. In one tab, i have a set of records displayed(like table) in which all columns are bound to a table. I want to sort the records in the tab based on one column. So i wrote the following code in WHEN-TAB-PAGE-CHANGED trigger in form level. It works fine when i click on the particular tab. But when i try to navigate from one tab to another tab which i want to sort, the records in the tab are not sorted. The buton i used to navigate from one tab to another is tab in key board.
DECLARE
l_order_by VARCHAR2 (70) := '(select code from emp)';
BEGIN
IF (:SYSTEM.tab_new_page) = 'PAGE1' OR :SYSTEM.cursor_block = 'BLOCK1' THEN
SET_BLOCK_PROPERTY ('BLOCK1', order_by, l_order_by);
GO_BLOCK ('BLOCK1');
EXECUTE_QUERY;
END IF;
END;
please help asap.
Thanks,
Gopi.

Gopi,
Based on your sample code, the only data block that you are modifying the sort on is "BLOCK1". Rather than combine all of your logic into the When-Tab-Page-Changed (WTPC) trigger, I suggest you simply use the WTPC trigger to set the cursor to the block associated with the selected tab page and then set your block properties and query your block in the When-New-Block-Instance (WNBI) trigger for each block. For example:
/* Sample When-Tab-Page-Changed trigger */
DECLARE
   tp_nm    VARCHAR2(30);
BEGIN
   tp_nm := :SYSTEM.TAB_NEW_PAGE;
   IF ( tp_nm = 'PAGE1' ) THEN
      Go_Block('BLOCK1');
   ELSIF ( tp_nm = 'PAGE2' ) THEN
      Go_Block('BLOCK2');
   ELSIF ( tp_nm = 'PAGE3' ) THEN
      Go_Block('BLOCK3');
   END IF;
END;Bare in mind, that clicking on a Tab Page does not move the navigation cursor the block associated with the tab page displayed. You must manually perform the navigation as demonstrated above. Now, in your WNBI triggers you would write something like the following:
/* Sample When-New-Block-Instance trigger */
DECLARE
   l_order_by VARCHAR2 (70) := '(select code from emp)';
BEGIN
   SET_BLOCK_PROPERTY ('BLOCK1', order_by, l_order_by);
   EXECUTE_QUERY;
END;You could combine this code into the WTPC trigger if you don't want to seperate the code and orgainze it according to your data blocks. The key, however, is that cursor navigation doesn't occur when you click on a tab, you have to perform the navigation yourself.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Stop Right Clicks from automatically Opening link in new tab?

So Normally I would right click a link, scroll down to "Open link in new tab" or "Open link in new Window" ect ect. But now, before I can choose which option I want (tab or window) it automatically opens the link up in a new tab. it does it for every single link... Even if I just want to copy a link (left click and highlight) it will automatically open the link up anyway.. How do I stop it from doing that?!?! It is extremely frustrating.. I don't want everything I right click to be opened in a new tab
Thank you ever so much for any help!

Tried in Safe mode already and the problem still occurs.. I recently re installed windows on my laptop, and the only ad ons I have is flash block, ad block and adobe flash player. I tried with all disabled, as well as disabling all the extensions.. still same issue..
I'm sorry this might have been important issue but I am using a USB mouse. the touchpad/clicker on my laptop works normally.. I can right click with the touch pad and it gives me options instead of automatically opening it.. could it be an issue withe the USB mouse? Ive never had issuse with it before I re-installed windows. the usb ports are kept clean and the mouse has fresh batteries..

Stop Firefox from starting a new tab when a new window opens?

This might be answered, but I cannot find a solution. I will give a scenario for my issue.
I am on the UPS website and click a button to print a shipping label. This opens a new FireFox window, BUT... the new window defaults to a generic tab that ALWAYS opens in circumstances like this. It does NOT open to the tab with my label. The print menu opens, but I cannot switch to the tab with my shipping label. No right click to print either. So I have to go to another browser. Absolutely annoying.
So how can I STOP Firefox from starting this generic tab when a FireFox window opens? BTW, the tab has a search bar at the top and several boxes that I can click on for Facebook, Instagram, etc. Thanks!

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I stop websites from opening unwanted windows/tabs?

I am using the latest updated version of Firefox on my MacBook. The MacBook has Snow Leopard OS with all updates installed. Recently I have been using a website to watch TV shows on the computer (http://http://streamallthis.me/). It has the nasty habit of opening tabs in the background while I watch the show. The site it always opens is http://http://www.putlocker.com/file/B119FD2BAC80777D . I have the prevent pop-up option checked but that doesn't stop it. Once it opened 61 tabs in the background. Sometimes it opens so many tabs so quickly that Firefox hangs. It even has frozen the computer while doing it's thing. I have checked and have no viruses or malware installed. I tested Safari also and it does the same thing there. Does anyone know a solution for this problem?

I finally decided to Reset Firefox when an excessive number of tabs (31) and windows (6) were opened with ads. To make things worse, the ad websites now popped open a dialog box telling me I have AdBlock installed and should get a paying account. This dialog would stop the video and had to be dismissed before continuing the video. Often the website would create additional ads while the dialog box was displayed and so overwhelmed Firefox that it hung. So I reset Firefox. You were right, reset and reconfiguring takes much time but I felt I would have a clean experience. I first tried the offending website with no preferences changed and no add-ons installed. Dozens of tabs immediately started appearing. I reinstalled all the add-ons as before and then scoured Firefox add-on for something which would prevent additional tabs and prevent the JavaScripts used to open the offending tabs. I found many choices like Disable Anti-AdBlock, AdBlock's own blocker and many more. Some stopped everything from happening. I tried options for hours and finally have Disable Anti-AdBlock and NoScript installed. After configuring them to block/stop offending sites, the pop-ups seem to have ended. I will update this question with additional information when I get it. It is obvious to me that they know how to circumvent Firefox's blocker. Thanks.

Opening a new tab opens my history on the left. How do I stop this from happening?

when opening a new tab in safari, it automatically opens my history in a column on the left. How do I stop this from happening?

IF you change the view of the left column to "Bookmarks" or "Favorites" this is what will be shown rather than "History".
There is no way to prevent this column from being shown but it can be dismissed by touching the "Book" icon at the top-left of the screen.

Stop Navigating from Basicdata1 tab to Basic data2 tab in MM01/MM02

Similar Messages

Maybe you are looking for