Stop Playback Looping During Editing

Can't seem to find where to set the loop/don't loop option. At the end of the timeline, the playback goes to the beginning and starts playback again. I want it to stop at the end and not loop (during editing). Can you help me find the setting to stop it from continuing playback from the beginning of the clip (stop playback looping during editing).
Premiere Elements 10
Win7(64)

There is no direct way to stop playback AT the last Frame.
Does the End key not work on your computer?
Once playback has been stopped, the PageUp and PageDn keys will take you to the first Frame of the last Clip, or to the first Frame of that last Clip. The Cursor keys will also step you, Frame-by-Frame, inside the Clip.
Good luck,
Hunt

Similar Messages

Why does my video skip on playback/preview during editing?

I thought I knew how to edit video...... I had a family reunion this summer and I'm trying to take all of that video (captured on my Samsung SC-HMX10C HD video camera) and edit for an eventual DVD output. I've got it all imported in Imovie, but when I add music (from I tunes),trim the video or add transitions then press playback it is all skippy. It plays for a few seconds correctly, then the video freezes (but I can sometimes still hear audio) and then suddenly reappears 5 or seconds down the clip.... then keeps happening. OVER & OVER & OVER....HELP! I have about 3 hours of video to do and it has taken about an hour for about 1 minute of clip because it keeps freezing up. Sorry if this has been asked before, but I've been reading these discussions all day and didn't find this exact question. By the way the video clips are MP4's. Thank you!

You would get better results if you convert the MP4 ciips into Apple Intermediate Codec before editing. After editing you can render them back into MP4 if you want.
MPEG Streamclip (free) will do this conversion. Or get iMovie 09 and it will do it.

Playback loops to beginning: How to stop?

I'm working away in PP CS6 and one little thing has slowly turned into a major annoyance today:
I'm building my sequence a shot at a time, and when I play back the last cut to check it, the playback of the timeline it will sometimes loop back to the first shot of the show, so I have to stop playback and hit "end" to get my current position indicator back to the end of the timeline where it should be. It doesn't do it all the time, just sometimes, and it's driving me batsh*t crazy.
Has anybody else seen this and if so, please, for the love of all that's holy, tell me how to stop this behavior.
Chris Conlee
Mac Pro (4,1)
OS X 10.7.4
24Gb RAM
nVidia GTX 285 (CUDA 4.2.10)
Dual Monitors
Matrox Mini Max
PP 6.0.1

Chris,
It sounds that this Preference setting needs to be disabled: "Playback work area after rendering previews".
1. Premiere Pro > Preferences > General
2. Uncheck "Playback work area after rendering previews"
3. Click on OK
This is the first Preference i change beacuase of this "sometimes-jump-back-to-start-behaviour". Maybe that's the solution for you, maybe not. Try it and see if it helps.
/Roger

On fcp6 - all of a sudden my titles and images disappear when timeline stops. Can't edit or see titles.

titles and stills work fine in playback, but disappear when timeline stops. Can't edit titles. Can't find how to bring things back. restarted FCP and Mac.

Second image shows outline of title over background image. All images are .jpg finished in Photoshop as I normally do. They worked fine during the first half hour of editing.

Can I stop two-finger scroll from stopping playback in 3?

Does anyone know if it's possible for Soundtrack 3 NOT to stop playback whenever a two-finger scroll occurs, no matter how miniscule?
I'm afraid my habit of editing, developed under Soundtrack 2, involves almost constant two-finger scrolling. Making matters worse, I'm still adjusting to the no-button track pad on my new MacBook Pro, so I sometime leave my thumb where the button was on my old machine. Even a little move that doesn't even reposition the window stops playback. I actually thought that playback was randomly stopping, so I restarted twice before I realized what was happening.

Same problem here.
Also, when horizontal scrolling with two fingers, the slightest inclination of the gesture up or down starts zooming in or out while moving. SInce zoom centers on the playhead, it keeps jumping back there at the same time. Very frustrating.
It is so bad that the interface feels better when I set scroll wheel to "Scrolls window content" in prefs. The drawback is that this makes my USB mouse's conventional scroll wheel do nothing, unless I am holding shift for horiz. scroll. And it still does not solve the problem that playback stops on any 2-finger scroll, even in the now disabled up-down direction.

Stopping Timed Loop inside a Reentrant VI

I just converted a project over from 8.5 to 2009 and I found that some of the funtionality that was working in 8.5 no longer works in 2009 (probably for good reason...).
Anyway, I found that if I tried to use the stop timed loop vi to stop any timed loops in reentrant vi's that I get a -804 error. The stop timed loop sub vi was in the same reentrant vi in the application, but I found it also did not work if it was outside the reentrant vi.
It does get a little hairy when thinking which loop you are trying to stop because of the reentrancy, but if the names passed into the instances are different for the loops then it shouldn't be a problem right?
See attached for a very simple example of this occuring.
Note: Just running in windows...not in RT
Solved!
Go to Solution.
Attachments:
Stop Time Loop.LLB ‏41 KB

I resorted to using an alternative way to stop the loops as well. Does anyone at NI know if this is a feature or a bug or if there is anyway to use the stop timed loop function with a timed loop in a reentrant vi?
Thanks.
Whoops... Just read your post. Thanks for the update.
Message Edited by klessm1 on 01-06-2010 10:55 AM

Stop Playback After Current Track

I hate to stop the music in the middle of a track, so i would love some way to make Spotify stop playback after the current track.
Right now I can simulate the desired behaviour by right-clicking an empty playlist, (that i have created for this purpose only) and selecting "Choose as Current Playlist" and making sure that the play queue is empty. While this is a nice workaround, I think that it would make sense to include a real "Stop Playback After Current Track"-function in Spotify.
Update (2015-02-01):
The previously suggested workaround doesn't even work any more as Rapti has pointed out in a comment. At one point it could even make Spotify crash completely.
I would like to point out that a saner, more flexible queuing system could allow even finer control over when to stop playing. Thus people who like this idea might also like:
Make entire play queue editable (I have added my own comment to that idea about how Google Play Music seems to work)

I've also wanted this feature for a long time, and I made a little userscript to do this using the Spotify Play Button. I wrote a blog post about it in Norwegian a couple of minutes ago. Here it is, run through Google Translate. A couple of the translations are a litle corny and weird, but I think you'll get the point, though. However, if you're fluent in Norwegian or JavaScript, these two links might help you clear things up a bit: Blog post in Norwegian, Spotify Break After at userscripts.org. Thank you for your time. :)

How do I mark and play audio clips simultaneously without stopping playback in the source window?

I do a lot of editing to music and I liked the function of being able to mark audio clips by tapping M while the song was playing. I was able to do this in CS4. When I upgraded to CS6 qnd I pressed the m key it would leave a marker but stop playback. Any idea how to customize this would be greatly appreciated.

Open the file from the Project Window.

How to stop while loop when a specified function is terminated?

I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
To do that, I should make a 2 independent loops, but there comes a problem here.
I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
Please let me know. Thank you.
Attachments:
help.JPG ‏200 KB

Is the upper loop commanding the lower loop at all? I would think you would have some type of communication between the loops. Just use that communication to send a stop command. Or the next best way is to just simply use a notifier.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

What is the best way to stop parallel loops at the same time, from any loop?

If there is a vi with two or more parallel while loops, what would be a good method to simultaneously stop parallel loop execution, from any of the parallel loops? My intent was to try and do this without local variables, so I used notifiers. This seems like an ok method for two loops, but how about for n loops?
In addition, my code has a flaw. I use an OR block to compare the stop status of each of the loops. This works fine most of the time, but if both loops are triggered to stop at the same time,the boolean result will be false, causing the loops to never stop. How can this be avoided?
Thanks,
Curt
Attachments:
parallel_loop_w-stop.vi ‏54 KB

I think you have the right idea, notifiers are one of the better ways to stop parallel loops. You can simplify things by using 1 notifier for everything. I modified your VI to use 1 notifier, it will set the notifier to True ONLY if the loop is stopping, then it stops. The other loop will read the notifier status, and stop based on it the next time it executes.
I also changed the second loop to stop and notify if it has an error (that is usually a good idea, especally if you have I/O or other things that can cause problems)
I also changed the switch mechanical action, that will eliminate the problems for your second question.
The VI's attached are written in Labview 7.0
P.S. If you have 7.1, the Queues are polymorphic, meaning that the typecast operat
ions are NOT needed!
Attachments:
parallel_loop_w-stop7_0.vi ‏45 KB

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to show Append Changes previous value in text box during edit

Hi,
I am using multi text column with append mode, all feature of append mode is working fine,but when any other field has been changed on that time append text box take blank value.
when using same list with ssrs ,report shows the current data,but after approved by manager current item change in blank and current data come in history.
is any way to do ,if any body change the any item same data appear during edit time in same column.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Hasan,
According to your description, my understanding is that the multi text column with append mode is not working fine in your SharePoint 2010.
For reproducing your scenario, I created a new custom list , turned on its version feature and added a multi text column with append mode. But it was working fine when I change the values of both the
multi text column and other columns.
For your issue, could you create a new list to verify the multi text column with append mode works correctly.
Best Regards,
Eric
Eric Tao
TechNet Community Support

I have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

i have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

Hi fais,
Following through with what JB suggested. The steps involved in replacing the inner for loop with a while loop are outlined below.
You can replace the inner for loop with a while by doing the following.
1) Right-click of the for loop and select "Repalce" then navigate to the "while loop".
2) Make sure the tunnels you where indexing on with the for loop are still indexing.
3) Drop an "array size" node on your diagram. Wire the array that determines the number of iterations your for loop executes into this "array size".
4) Wire the output of the array size into the new while loop.
5) Set the condition terminal to "stop if true".
6)Drop an "OR" gate inside the while loop and wire its output to the while loops condition terminal.
7) C
reate a local of the boolean "stop" button, and wire it into one of the inputs of your OR gate. This will allow you to stop the inner loop.
8) Drop a "less than" node inside the inner while loop.
9) Wire your iteration count into the bottom input of the "less than".
10) Wire the count (see step 4 above) into the top input of the less than. This will stop the inner loop when ever the inner loop has processed the last element of your array.
Provided I have not mixed up my tops and bottoms this should accomplish the replacement.
I will let others explain how to takle this task using the "case solution".
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

MASTER/SLAVE PATTERN: how to stop slave loop without stop main loop

Hi All, I am studying the master/slave loop and saw an examples are like this (only master block shows)
From this case, as I understand, if we click "set" button, slave loop will run. If we click this button again to mak it "Flase", the slave loop will be stopped as well as the main loop will be stopped as well.
Now if I have a multi-function main loop, I just want to start or stop slave loop when click "set" button, how can I do it? Thank you very much!

bhl3302 wrote:
From this case, as I understand, if we click "set" button, slave loop will run. If we click this button again to mak it "Flase", the slave loop will be stopped as well as the main loop will be stopped as well.
Your understanding is completely wrong. There is nothing in the image you show that would stop either loop. In this situation the "set" button would normally have a latching mechanical action, meaning that when it is pushed, it will stay true until it is read once, at which point it will return to false. Placing the control terminal inside the event case causes the terminal to be read and resets the button to false. With a latching mechanical action, there will be only one event generated even though the boolean will change value twice (from false to true, and from true to false). You'll never have a situation where you push the button once to set it true, and again to set it false. However, even if the mechanical action is switching, not latching, it still won't make a difference here - the event case does the same thing whenever the value changes, regardless of whether it's true or false.

How to stop while loop for particular time

                public void test()
               new Thread(new Runnable()
                    public void run()
                         //Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
                         System.out.println("test");
                         //System.out.println("test ..."+i);
                         try
                              Thread.sleep(3000);
                         catch (InterruptedException e)
               }).start();
        public void startTest()
                while(i < marquee_Str1.length)
               marLbl1.setValue(marquee_Str1); //set value to textbox for perticular id
               marLbl2.setValue(marquee_Str2[i]);
               marLbl3.setValue(marquee_Str3[i]);
               test(); // call thread function
               i++;
in this code while loop don't stop
plz help me to stop while loop for certain period by using thread or other technique

Yes.. the original problem would be your test() method put the sleep in an entirely separate thread of execution. So the thread is created then the method just keeps waiting. The while loop should directly call Thread.sleep... which you have apparently figured out!

Stop Playback Looping During Editing

Similar Messages

Maybe you are looking for