Stop Printing Automatically from SQ report

Hi Gurus,
I need suggestions on how to stop auto printing of my background SQ report. I run report from SQ00 and in background with Variant and once executed it creates a spool request and goes to LOCL printer.
I do not need to get the print out but I need to get the list in spreadsheet.
Kindly suggest with your valuable comments.
Thanks in advance!
Bawa

1) In SU3, Defaults tab, uncheck the checkbox "Output immediately"
OR
2) Instead of "execute immediately", use "schedule" option and then in transaction SM37 change the job from "print immediately" to "send to SAP spooler".

Similar Messages

  • MY envy 5330e has stopped printing anything from online sources.

    MY envy 5330e has stopped printing anything from online sources but will print from on board documents or pictures.

    Hey @youngfmly,
    Because your HP ENVY 5530 e-All-in-One Printer is producing blank prints from three computers when printing from the the internet I'm wondering if there may actually be a hardware ink system issue occuring. I understand that this may sound odd as everything else appears to print fine. However, when printing from your computers colour ink is used to enrich the black ink when printing in certain programs. Primarily when the computer 'sends' the print job to the printer as an image file. Therefore, just to ensure that your printers ink system is functioning properly, I am going to have you print a standalone Print Quality Report.
    How to Print the Quality Report:
    Load plain white paper in the paper tray.
    On the printer control panel, touch the Settings icon (), and then touch Tools. The Tools Menu displays.
    Touch Print Quality Report. The printer prints the test page.
    If this report prints perfectly: Than the issue that you're experiencing is not related to the printer. Rather, there is likely a setting that still  needs to be checked under Google Chrome. If your modem/router was causing this issue all prints would be affected.
    If this report prints with quality defects or missing colours: Than the Google Chrome printing issue that you're experiencing is being caused by your printer. To resolve this print system issue can I please have you click here. Once the support document opens please run through Solution six, Solution seven, and Solution eight. This includes any sub-steps under the listed Solutions.
    Please let me know the result of printing this standalone Quality Report. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Remove Printer Name from Crystal Report

    How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
    Here's the scenerio.  When I first create a Report and don't go into Page Setup, PrinterName property is blank.  If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected.  If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank.  But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

    I'm still not sure what is unclear about my first question.  And I'm not sure how any of the info you are requesting is going to make any difference in answering my question.  And I'm not sure how your analogy fits here but ..
    Version of CR = 11.0.0.895
    CR Service Packs applied = None
    Web or Win app? = Win App
    OS? = Windows XP Service Pack 3
    Development language?  = Both Visual Basic 6 and C#.Net 2008
    Method of CR files deployment = email the .RPT file to a client
    Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
    What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
    So here are the exact steps so you can understand what is going on:
    I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
    1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
    2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
        Dim m_crApp As CRAXDRT.Application
        Dim m_crReport As CRAXDRT.Report
        Set m_crApp = New CRAXDRT.Application
        Set m_crReport = New CRAXDRT.Report
        Set m_crReport = m_crApp.OpenReport("Test.RPT")
    3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
        ie. crReport.PrinterName is equal to ""
    4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
    5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
    6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
        ie.  crReport.PrinterName is equal to ""
    7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
    8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
    9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
        ie.  crReport.PrinterName is equal to "
    MyNetwork\MyPrinter"
    PROBLEMS:
    1. The client needs the report to go to the default windows printer of their machine
    2. If the "No Printer" Option is checked, the Report does not print at all
    3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply.  As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
    4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
    5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
    All i want to do is either:
    1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
    2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

  • All in One Printer C5180 stopped printing/scanning from mac 10.6.8

    Hi
    My All-in-One C5180 has stopped printing and scanning from mac 10.6.8. It had worked for the past few years but after not using it for 8 months (out of country) it hasn't worked since I came back. I have done as a few suggested, carried out a software update on mac and also downloaded a new driver from this site. Neither worked. The message appearing is " printer off-line" and the printer symbol has red exclamation mark. 
    Would really appreciate any help.
    Thanks in advance
    Anne

    Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

  • Getting error while printing PDF from ABAP Report

    hi everyone,
    I am trying to print PDF form from a report. But the output i get is an error msg on the Paper
    ERROR: limitcheck
    OFFENDING COMMAND: PDF Parser: Damaged PDF file, failed reading trailer STACK:
    thanks.

    Some additional information:
    In the defaulttrace, I can see this:
    Service XMLFormService: Native process (PID=15892) E:\usr\sap\PEP\JC00\j2ee\os_libs\adssap\XMLFormService\bin\XMLForm.exe terminated abnormally with error code 128
    Processing exception during a "Render" operation.
    Request start time: Fri Mar 06 10:11:55 CET 2009
    com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE
    Exception while connecting to <SERVER-IP>:3533
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method

  • InfoView not defaulting print settings from Crystal Reports XI

    I have a form/report created from Crystal Reports XI published to InfoView that has the print settings set for the manual tray when printed. When running the report in InfoView, it does not default to the manual tray when printing. I am publishing directly from Crystal Reports. I have the Process/Print Setup 'Set layout to: Report file default' and the Schedule/Format 'Use options saved with report' checkbox checked. I am not finding any other settings to tell InfoView to use the report page layout/printer settings. Anyone know of any other options I should check? Thanks!
    Edited by: Kelley Freelove on Oct 22, 2009 3:09 PM

    That would be the correct forum as this one is for SDK issues only.
    If you are not getting helped on the other BO forum you may want to consider creating a case if you have a valid support contract.
    Jason

  • Can't Print Landscape from Crystal Reports Viewer XI

    Post Author: conrad
    CA Forum: General
    Product: Crystal Reports Viewer XI, version 12.0.0.r130_v20070725 and
    Crystal Reports XI, version 11.0.0.1282
    Patches Applied: none
    Operating System(s): XP Pro SP2
    Database(s):
    Error Messages: noneSteps to Reproduce:
    Download and install Crystal Reports Viewer XI
    Open a Crystal Report that prints landscape.
    Save report with data.
    Open that report with Crystal Reports Viewer XI.  Report will display landscape.
    Click Print..OK
    Viewer will attempt to scale output to fit on portrait paper, with varying degrees of success.
    Checking the properties of the report from Viewer (File...Report Properties...) shows a "Page Orientation" of "Landscape" and a message "Page Orientation and size defined by the application (no page information set by report author)."
    Any ideas on how to get the report to print landscape?  It prints that way from Crystal Reports XI.

    Hello Glenda,
    as you refer to the legacy technology I recommend to post this query to the [Legacy Application Development SDKs|SAP Crystal Reports - Legacy SDKs; forum.
    This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Legacy Application Development SDKs queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Does anyone know how to discard printer information from a report?

    Hello all,
    We've got several reports in which printer info is saved in the report.
    We would like to remove that info programmatically from the report.
    Does anyone how to do that and to save this modified info to the report?
    I would be pleased to be given a code example.
    I guess it should be something like the fragment below, but saving this to the report doesn't seem to be doable.
    printOptions.SavedDriverName = printOptions.DriverName = "DISPLAY";
    printOptions.SavedPortName = printOptions.PortName = string.Empty;
    printOptions.SavedPrinterName = printOptions.PrinterName = string.Empty;
    printOptions.PaperSize = CrPaperSizeEnum.crPaperSizeDefault;
    printOptions.PaperOrientation = CrPaperOrientationEnum.crPaperOrientationDefault;
    printOptions.PaperSource = CrPaperSourceEnum.crPaperSourceAuto;
    report.ReportClientDocument.PrintOutputController.ModifyPrintOptions(printOptions);
    report.ReportClientDocument.PrintOutputController.ModifyPrinterName(string.Empty);
    report.ReportClientDocument.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
    report.ReportClientDocument.PrintOutputController.ModifyPaperOrientation(CrPaperOrientationEnum.crPaperOrientationDefault);
    Thanks,
    Henk Spaan.

    Hello Henk,
    You could simply check the 'No Printer' option in the report.
    From designer check File --> Page Setup --> No Printer.
    Or do it programatically.
    http://scn.sap.com/community/crystal-reports-for-visual-studio/blog/2010/09/15/how-to-check-no-printer-on-a-crystal-report-using-the-ras-sdk-in-net
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Stopping printer icon from appearing in the dock

    Hi,
    We have a problem where our students (network homes, managed by WGM) are clicking on the printer icon in the dock once they have sent a job to print, and are pressing the 'Stop Jobs' icon, thus holding up the queue for other students to print.
    Is there a way to stop the icon appearing in the dock?
    Thanks,
    Jonathan

    Are you using
    a dedicated print server ?
    a print server as part of the server OS ?
    or simple printer sharing, maybe Apple Printer Sharing, or Bonjour, or CUPS or another ?
    Simple Printer Sharing, or a network printer without dedicated print server software is always going to allow users to stop printing, even if it holds up others.
    Even with dedicated print server, you may want to allow users to stop prints - holding up the printer - if they need to change paper, ie. pre-printed stationery, acetate or different paper weights instead of blank 80g/sq m paper.
    But a dedicated print server may allow you to restrict job access to only deleting the print job.

  • How to stop printer (6500e) from mixing color to get black

    I'd like to know how to set up the printer to stop printing black if the black ink cartridge is empty (ie. not mix the other 3 colors together to get black).
    any help would be appreciated.
    sc

    Hi,
    Please check this (same series of your printer):
      http://h30434.www3.hp.com/t5/Other-Printing-Questions/How-do-you-stop-printing-test-page-everytime-y...
    Hope it helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to print automatically from Reports6i?

    Hi all,
    How to print from Reports6i automatically once it is generated?
    Thanx in advance
    ranjith

    Set the destype to PRINTER, hide the parameter form, run the report and it goes directly to the printer.

  • How to print smartform from a report

    Im displaying a report, which contains several documents, whereby which ewch document is connected to a smartform.
    The page displaying the report contains a button 'Print'
    When clicking on the Print button, all the documents in the report should be printed.
    But my program is creating a spool file of the report, which will be printed further - its not what I want
    I want the program to print the smartforms of each documents on the report directly.
    heres my code and I dont know what I should do to be able to print the smartforms directly
    Get the function module name of the smartform.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname = '/EU000/FI_PRINT_DEBIT_NOTE'
          IMPORTING
            fm_name  = g_fm_name.
    gw_options-tdnoprev = ' '.
    gw_options-tddest = 'LOCL'.
    gw_options-tdprinter = 'LOCL'.
    gw_options-tdnewid = 'X'.
    gw_options-tdimmed = 'X'.
    gw_control-preview = ' '.
    gw_control-no_dialog = 'X'.
    write: text-006,' ', text-007, ' ', text-008.
    write:/.
    For all the documents
        LOOP AT gi_all_data INTO gw_all_data.
          write: gw_all_data-gjahr(4), ' ',gw_all_data-belnr,'     ', gw_all_data-belnr.
          write:/.
    CASE SY-UCOMM.
    WHEN 'PRINT'.
    Call the smarform
          CALL FUNCTION g_fm_name
            EXPORTING
              gw_all_data = gw_all_data
              user_settings = ' '
              output_options = gw_options
              control_parameters = gw_control.
    WHEN 'BACK'.
    LEAVE SCREEN.
    ENDCASE.

    DATA:   x_control_parameters TYPE ssfctrlop,
            x_output_options TYPE ssfcompop.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_prin LIKE usr01-spld.
    SELECTION-SCREEN BEGIN OF LINE.
    INITIALIZATION.
      SELECT  spld
              FROM usr01
              INTO p_prin UP TO 1 ROWS
              WHERE bname = sy-uname.
      ENDSELECT.
    START-OF-SELECTION.
      x_output_options-tdimmed = c_x.
      x_output_options-tddest = p_prin.
      x_output_options-tdnewid = c_x.
      x_output_options-tdreceiver = sy-uname.
      x_output_options-tdcopies = '001'.
      x_control_parameters-device = 'PRINTER'.
      x_control_parameters-no_dialog = c_x.
      x_control_parameters-langu = sy-langu.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
         formname                 = 'Z_SMARTFORM'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        fm_name                  = f_name1
      EXCEPTIONS
        no_form                  = 1
        no_function_module       = 2
        OTHERS                   = 3
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    IF P_PRI = 'X'.
      CALL FUNCTION F_NAME1
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
          wa_header                  = wa_zmexh51
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        TABLES
          tab_item                   = TAB_ZMEXD51
          tab_item1                  = TAB_ZMEXS51
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ELSEIF P_PRE = 'X'.
      CALL FUNCTION F_NAME1
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
      USER_SETTINGS              = 'X'
          wa_header                  = wa_zmexh51
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        TABLES
          tab_item                   = TAB_ZMEXD51
          tab_item1                  = TAB_ZMEXS51
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDIF.
    Check the above code its just similar requirement  it may helpful to you.
    Thanks,
    Phani.

  • Data missing when Exporting or print preview from ALV report

    Hi
    I have a alv report which is showing fine but when i try to export it to say excel sheet or do print preview some of the data is missing. Can anyone tell me how to fix this. or at least point to some document that discuss this problem.
    Here is my ALV CODE
    *  CALL_ALV
    form call_alv.
    *  v_repid = sy-repid.
      perform build_field_catalog using field_tab[].
      perform build_eventtab      using events[].
      perform comment_build       using header_alv[].
      perform build_sorttab       using gt_sort[].
    *  perform build_layout.
    *  v_variant-variant = '/TEST3'.
    * Call ABAP List Viewer
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = v_repid
          i_callback_user_command = ''
          i_structure_name        = 'REC'
          it_fieldcat             = field_tab[]
          it_special_groups       = gt_sp_group[]
          it_sort                 = gt_sort[]
          i_save                  = v_save
          is_variant              = v_variant
          it_events               = events[]
    *      is_layout               = gd_layout
        tables
          t_outtab                 = REC
        exceptions
          program_error            = 1
          others                   = 2.
    endform.
    From my Catalog this data is missing
    * BUILD_FIELD_CATALOG
    form build_field_catalog USING pt_fieldcat type
                                   slis_t_fieldcat_alv.
      data:  ls_fieldcat type slis_fieldcat_alv.
      clear: fieldcat, pt_fieldcat[].
      ls_fieldcat-tabname        =                'REC'.
      ls_fieldcat-edit           =                ' '.
        ls_fieldcat-fieldname      =                'PERNR'.
        ls_fieldcat-seltext_s      =                'Employee #     '.
        ls_fieldcat-seltext_m      =                'Employee #           '.
        ls_fieldcat-seltext_l      =                'Employee #           '.
        ls_fieldcat-datatype       =                'C'.
        append ls_fieldcat to pt_fieldcat.
    There r coupole that's missing
    But there couple that show's up like this one
        ls_fieldcat-fieldname      =                'STIME'.
        ls_fieldcat-seltext_s      =                'ST   '.
        ls_fieldcat-seltext_m      =                'St Tm     '.
        ls_fieldcat-seltext_l      =                'Start Time          '.
        ls_fieldcat-datatype       =                'C'.
        append ls_fieldcat to pt_fieldcat.
        ls_fieldcat-fieldname      =                'ETIME'.
        ls_fieldcat-seltext_s      =                'ET      '.
        ls_fieldcat-seltext_m      =                'Et Tm           '.
        ls_fieldcat-seltext_l      =                'End Time             '.
        append ls_fieldcat to pt_fieldcat.
    I always reward points.
    Thanks

    hi Anwarul,
    Try the following code:
    *  CALL_ALV
    form call_alv.
    *  v_repid = sy-repid.
      perform build_field_catalog using field_tab[].
      perform build_eventtab      using events[].
      perform comment_build       using header_alv[].
      perform build_sorttab       using gt_sort[].
    *  perform build_layout.
    *  v_variant-variant = '/TEST3'.
    * Call ABAP List Viewer
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = v_repid
          i_callback_user_command = ''
          i_structure_name        = 'REC'
          it_fieldcat             = field_tab[]
          it_special_groups       = gt_sp_group[]
          it_sort                 = gt_sort[]
          i_save                  = v_save
          is_variant              = v_variant
          it_events               = events[]
    *      is_layout               = gd_layout
        tables
          t_outtab                 = REC
        exceptions
          program_error            = 1
          others                   = 2.
    endform.
    form build_field_catalog USING pt_fieldcat type
                                   slis_t_fieldcat_alv.
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    exporting
    I_PROGRAM_NAME  = sy-repid
    I_STRUCTURE_NAME = 'REC'
    changing
    CT_FIELDCAT          = pt_fieldcat.
    When you export to excel, the character fields and numeric columns gets re-arranged, but all the fields will be displayed in this case.
    hope this helps.

  • Print Automatically from a Tethered Camera (Event Printer)

    I Have My Camera Tethered - So I shoot, and it automatically Imports and applies a preset.
    Now I want to take it a step further and Automatically Print as well.- I use an Event Printer (Dye-Sub printer)
    Basically, I would like to run Lightroom for a PhotoBooth Event and every time I snap a shot I want lightroom to print it Automatically.
    Any Help would be appreciated.

    Would it then be possible to direct aperture tethered shoots to a folder where aperture will hot import, from which I can use action after import via the scrip as you mention?
    I've seen it being done with my own eyes but I wasn't able to inquire more...

  • Deskjet 5440 stopped printing wirelessly from my MacBook Pro after upgrading to OS 10.8

    My home printer is connected by cable to a desktop Mac (Power Mac G5).  I have always printed wirelessly to it from my MacBook Pro laptop through our home wireless network.  However, just recently I upgraded the operating system on my laptop to 10.8.2.  At the same time, I upgraded the HP driver software (from HP) that is supposed to allow the 5440 to work with the new OS.  Since then, I can print from my laptop if it is connected by cable to the printer, but not wirelessly.  When I attempt to print wirelessly, get a message that says the printer is not connected.

    So you are using Printer Sharing on the PowerMac?  If so, on the PowerMac, go to System Preferences > Print & Fax and delete the printer with the '-' sign at the bottom of the printer list.  Re-add it with the '+' sign.
    Make sure that Printer Sharing is checked and that in System Preferences > Sharing that Printer Sharing is also checked there.
    Now, on the MacBook Pro, go to System Preferences > Print & Scan and click the '+' sign to add the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for