Stop rebooting half way through

My phone stopped rebooting over half way the rebooting process. The line is just sittng there

Please try to boot your handheld in safe mode, using procedure given in below URL
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB17877&sliceId=2&cmd=displayKC&d...

Similar Messages

My 80 gig ipod color stops updating half way through

My ipod 80 gig color stops updating half way through the synch process. I have tried to restore it and it still fails and gives me an error message saying it cannot read or wrtie to the ipod after it is half way loaded after trying to load 5000+ songs only it gets to about 2,250 and stops.

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resultings numbers and we can verify what the next steps to take.
B-rock

IPOD CLASSIC STOPS SYNCING HALF WAY THROUGH

my ipod classing stops syncing half way through and says could not be synced can anyone help me please?

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resultings numbers and we can verify what the next steps to take.
B-rock

IT tunes music - some, a lot, of somgs stop playing half way through. the files are all ok and complete? ive tried downloading / updating but no joy?

IT tunes music - some, a lot, of songs stop playing half way through. the files are all ok and complete? ive tried re - downloading / updating but no joy? can anyone help its most annoying

Yes, in theory re-converting would lessen the quality further. However, I have heard people claim (unsubstantiated) that if you are encoding with the same encoder at the same bit rate, then since it will use the same algorthymn, it won't really change the file. I have absolutely no idea if that is true or not.
But... I figure some slight loss in quality re-encoding is still better quality than a song that only plays half way and then stops, right? I suppose you could always tag those files in the comment section with something like "Re-Encoded" and then later if you gain access to your old CDs, you can then make a Smart Playlist to gather those songs and then re-rip them again from your CDs.
Cheers,
Patrick

8900 Keeps Rebooting half way through a Reboot.

Hi,
I use my BlackBerry for Business, it's my primary phone for both work and personal. Recently I got a brand new 8900 and worked great. One night while away on business it froze for the first time, I pulled out the battery and rebooted it and it kept rebooting half way through. I could not connect it to a PC at all.
T-Mobile offered no help and sent me to a third party repair guy who told me it would fix it for 60 dollars. This is frustrating as this phone for one is expensive and brand new and should not fail, and secondly, t-mobile offers no support.
Now for the kicker, my roomate has the same phone and went and got the Droid. He leant me his 8900, also brand new sub 6 months where my first one is sub 3 months old.
Well tonight, I installed the new bbm and it rebooted the phone and guess what....same thing. Now I have no phone and of course, no support from my carrier. What in gods name is going on with these phones?

If there is no error message on the phone display that indicates what is going on ("AppError", "JVM Error", both with codes), then we must guess. You might have some luck with this article:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
As for support, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help - PC Rebooted half way through an N80 FW Upgr...

Hopefully someone will be able to help!
I was updating the Firmware in a brand new N80 and the PC decided to reboot half way through the process. Now the phone will not even power on.
rgds
Jim

09-Jul-200711:28 PM
planetf1 wrote:
So question. Isn't it about time at least the basic loader was doubled up, and/or refreshed from phone ram rather than this potentially unreliable process which seems to -- not infrequently -- result in bricking.
Good idea - but remember one thing - if you read the title of this post "Re: Help - PC Rebooted half way through an N80 FW Upgrade" it states that the PC rebooted - and Nokia has no control over this element of the proceedings unfortunately.
You could make a point that Nokia should have make the NSU more capable of recovering a phone in case of a previous failure, and this could indeed come in future incarnations of the application, but the PC will always be an element of the proceedings which are a "wildcard" in the sequence of events.
I'm pretty certain for every user who has reported a problem upgrading their firmware, there's probably about 6 or 7 (if not more) that have upgraded without problems - the trouble is that you don't hear about it because they haven't experienced any issues !
I myself have upgraded my firmware on the N70 and N95 two or three times without any problems.
Regards,
Edward

My Mad Men shows stop downloading half way through. Why is that happening, and how do I fix it?

I bought mad men and the shows stop downloading half way through. Help!

Do you get an error message when you try to download the items? If so, what does it say? (Include error message numbers if you're getting any, please.)

I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR

Why do songs stop playing half way through?

My husband downloaded a new playlist to his iphone, but many of the songs end half way through and then go on to the next song. How can we fix this?

Hi ktrib76,
In my experience, the songs that are skipping may not have transferred over to your husband's iPhone correctly. I would advise you to uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to the iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from the iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following articles:
iPhone and iPod touch: Songs or other audio content are skipped during playback
http://support.apple.com/kb/TS3159
Troubleshooting songs that skip
http://support.apple.com/kb/TS3217
Cheers!,
Matt M.

My nano just switches off and stops playing half way through a track

Tried resetting several times ... still stops after approc a minute
I switch it back on and press play and it continues right were it went on pause.
Attempted to check if the MUSIC SETTINGS had some timeout ... but cant succeed.
Any advice?

Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
i

Media Encoder CS4 stops encoding half way through

I am going a little bit insane.
Running PP and Media Encoder CS4 on Windows 7 and attempting to export a 5 minute film on preset 'Download NTSC Source' (but this happens no matter what settings I use): Media Encoder runs for approximately 5-6 minutes, loads the sequence, begins to encode and then stops.
It doesn't spit out an error message, it finishes the file (a 6MB .wmv file (on these settings) that plays a blip of white and then ends) but never gets further than four minutes through what should be a 35 minute encode process.
I've trashed the prefs, I've run all the updates, I'm using XP Compatibility mode ... I literally cannot figure out why the process should just ... stop.
Help??

Welcome to the forum!
Do you have any titles, graphics or MOV files near the beginning of your sequence? I think there was a bug in CS4 that would trash the encode if they were there. It was eventually solved -- either through an update or in CS5. Make sure your copy of CS4 is fully updated.
Jeff

Nike Amp: stops connecting half way through workout

I've been using the Nike Amp with my ipod for the past two months. It's a great piece of kit, and I've come to depend on it to change music, pause a workout when I need to wait for traffic etc. Now it loses it's connection to the ipod mid workout which is rather frustrating. Does anyone else have experience of this problem and any advice as to how I may resolve it? Thanks

This happens to me in a roundabout way. I suspect the watch is just not a very good transmitter. I've had 3 watches replaced now and they all do the same thing.

Was watching a video I downloaded earlier today, and it worked fine. Tried watching it now and it stops about half way through. Solutions to this issue?

This happened just today with the only two videos I downloaded from iTunes. They seemed to stop working after I synced my itouch, but I don't know how that would have caused the problem... Both videos will play about 2 minutes on the itouch, then stop.

In case you do not know, to redownload videos you have to contact iTunes.
How to report an issue with Your iTunes Store purchase

I bought an album but 3 of the songs stop playing half way through, it's just silence. Can I get a refund and if so, how?

Recently, I bought the Adam Barnes album and I put it on my iPod. When I started listening to it and it was great. But when it got to track 4, it played the first minute and then it was just silence for the rest of the 3 and a half minutes song. It did this again for tracks 5 and 6 too, but the other tracks are fine. I checked my iTunes and it doesn't work on there too. Has this happened to anyone else? Can I get a refund? If so, how can I get one?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Creative cloud installer stopes installing half way through. No error. The window just disappears.

No issues downloading the DMG. but I cant actually run the installer all the way. Im running 10.10 and there dousnt seem to be any trace of cc on my Mac?
Help please.

Spdj86 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to reinstall the Creative Cloud Desktop application.

Stop rebooting half way through

Similar Messages

Maybe you are looking for