Stop showing error message

I have a script that execute some sql.It produces some error and the error message is shown in the page.I want to stop showing error on the page.What should i do?

Or, if you'd prefer to suppress only this particular error message, so you can still see others in the future (which seems safer to me), you can preface the culprit line of code with the @ operator, which will suppress errors generated within that single line.

Similar Messages

  • ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  Why?!

    For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  I am using Windows 7 on my 64-bit computer.  iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups.  It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me".  Why can't I sync these photos, and what can I do?  Thanks so much for the help, I really appreciate it!

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

    Two months ago, I bought a new computer that uses Windows 8.  I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason.  Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message.  I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details.  I've tried installing it as an administrator, but got same failed results.
    Any help?
    Thanks, Mike

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • ITunes has stopped working error message while downloading iOS 5

    I am having issues with iTunes stopping while im in the middle of the new iOS 5 download. It never fails while im just using itunes for anything except downloading the new software. Im not sure how to fix it and im hoping someone else might be able to help me out. This is what my problem report states when i open it up.
    Problem Event Name:    APPCRASH
    Application Name:    iTunes.exe
    Application Version:    10.5.2.11
    Application Timestamp:    4ee0844d
    Fault Module Name:    msvcrt.dll
    Fault Module Version:    7.0.6001.18000
    Fault Module Timestamp:    4791a727
    Exception Code:    c0000005
    Exception Offset:    00009f13
    OS Version:    6.0.6001.2.1.0.768.3
    Locale ID:    1033
    Additional Information 1:    57ac
    Additional Information 2:    97b6ca588eb69f9a752c1d44acafdfa9
    Additional Information 3:    9518
    Additional Information 4:    0f4b683d85bb934e783b2cc9ae8a1ee3

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • "iTunes has stopped working" error message during syncing

    I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • ITunes has stopped working error message on opening iTunes.  How do I get passed this

    Every time I open iTunes I get the error message "iTunes has stopped working" and all I can do is close the program.  I have uninstalled iTunes and re-installed it but I get the same error.  I am working on windows 8.  Can anybody please help me to solve this problem.

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • How to show error message in a report program

    Hello Guys,
    I am making a report using smartforms. I am successful in showing data  but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
    So i used related error msg here like
    if sy-subrc ne 0.
              message e357.
               endif.
    But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
    Thanks,
    Rosaline.

    >
    Rosaline. wrote:
    > Thanks all for reply.  Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
    >
    >
    if it_final[] is not initial.
    >*             if sy-subrc ne 0. ---> "Remove this condition check, it not required
    >            Message e000(8i) with 'Parameter value not found'.
    >            endif.
    > *            endif. ---> "remove this
    >
    Hi,
    Sy-subrc doesnt need to be validated here, remove that If condition and check again.
    Regards,
    Karthik D

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • How to show error message on page #NOTIFICATION_MESSAGE#?

    Hi,
    Is it possible to show error message on a page, where apex substitutes #NOTIFICATION_MESSAGE# at page template, with a javascript call? My requirement is to report error messages which i get from ondemand process, these on-demand processes were called from my javascript code. If any error message is returned by on-demand process, as of now, I'm reporting the error message to user by javascript based alert dialog box, but it would much better if i could keep the error message reporting by my application in a consistent manner. So any suggestion please?
    -Krishna

    Hi Roel,
    Thanks, jumping in for help.
    I tried your given code, i found that the page html source doesnt has any element with a name '#messages'. As per my understanding, its the apex engine which checks for any error, if found it shows it by adding an element id '#messages', but here on my requirement its not the apex engine which has detected the error, its my functional logic which wants to report a message. On a normal and error free page condition, we usually dont find '#message' element. I'm curious on how apex inbuilt engine is reporting an error to a page?

  • How do I stop MobileMe error message without a Preference Panel?

    This MacBook running 10.6.8 has no MobileMe preference panel and no "ByHost" folder, so I can't follow the instructions found elsewhere here to stop the error message "You entered an invalid MobileMe member name or password. Verify your MobileMe member name and password in MobileMe System Preferences."
    The error message keeps popping up and I can't figure out what program is producing it. I have removed the MobileMe account from iMail. I've checked iCal and Address Book, and they don't have MobileMe syncing turned on.

    Removing the MobileMe account from Mail (not iMail) won't remove the account's setting for Outgoing Mail Server (SMTP). Look at the list in your remaining Mail accounts and delete the one for MobileMe. Otherwise, everytime you open Mail, that server connection will attempt to connect.

  • When deploying the webdynpro java application , showing error message

    Hi Masters,
    when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
    But Iogin to sdm tool ( remote gui .sh) with same password, which password  i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
    URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
    Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
    Deployment exception : The deployment of at least one item aborted
    Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

    Hi Sujana,
    For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
    Your error show that J2EE_admin information is not correct.
    So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
    Hope this will helps you.
    Thanks
    Arun Jaiswal

  • Adobe reader has stopped working error message after installing reader XI on windows 7

    Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
    Does anybody know why ?

    Dear Pat,
    Thank you for your reply.
    It is Ver. 11.0.06 for Acrobat XI
    No, I can't open the Reader at all.  The error message box popped up immediately when I run the Reader

  • Show error message when Install SM7 in step 4 execute Service

    Hi All
    Show error message when Install SM7 in step 4 execute Service.
    Anyone can help me fix the problem pls!
    Regards
    Kevin
    Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
    Information for SAPInst:
    sid=SMD
    number=98
    2009.06.08 11:16:59
    Task completed with status 0
    INFO 2009-06-08 11:17:00.0
    Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.250
    FSL-02077  File system export (share) saploc does not exist.
    INFO 2009-06-08 11:17:00.484
    Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.718
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:05.265
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO 2009-06-08 11:17:05.609
    Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:05.875
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:08.187
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:10.531
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:12.859
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:15.156
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    WARNING[E] 2009-06-08 11:17:20.281
    FSL-01002  Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
    INFO 2009-06-08 11:17:20.562
    Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:20.781
    Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:22.312
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
    INFO 2009-06-08 11:17:28.828
    Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:29.093
    Node C:\WINDOWS\system32 already exists.
    INFO 2009-06-08 11:17:31.0
    Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:32.390
    Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
    INFO 2009-06-08 11:17:33.171
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.203
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.250
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.281
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.328
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.375
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.421
    Nothing to do. User privileges are an empty string.
    INFO[E] 2009-06-08 11:17:35.703
    FSL-01027  Account user="hk-is-000818\SAPServicePAS" does not exist.
    WARNING[E] 2009-06-08 11:17:40.796
    FSL-01002  Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
    WARNING[E] 2009-06-08 11:17:40.796
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-06-08 11:17:40.843
    FCO-00011  The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

    hi Subhash
    tkx it work
    but I got another error when install afterwards. do u know how can fix , many tkx
    Kevin
    WARNING 2009-06-09 20:39:02.421
    Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    ERROR 2009-06-09 20:39:02.468
    FCO-00011  The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

Maybe you are looking for