Stop slider prompts for shut down, start, and wake up?
Is it possible to stop the annoying slider prompts during shut down, start, and wake up?
Brand new iphone
Thanks.
Mac
Thanks.
Similar Messages
-
why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?
Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
My one month old macbool pro shut down unexpectedly and is not starting up the magsafe led is faint orange and flickering what to do now???will I be charged by apple istore ??? I'm very panicked please reply
Welcome to Apple Support Communities
It seems like your logic board is damaged. As your computer is in warranty, you will get your MacBook repaired for free if you take it to an Apple Store or reseller. Furthermore, you may receive a new MacBook -
Computer from Sleep now starts up and shut downs, starts up shut down, ...
Computer had been running this morning and I was away for a couple of hours. When I returned I found that my HP S5780t was shutting down then starting up again, then shutting down, starting up, ... Power supply LED shows green, disconnected hard drive and DVD drive and same condition exists. BIOS screen does not show up. All three fans working properly. Monitor shows initial HP screen but machine shuts down before anything can happed. Tried F10 but machine still shuts down. Machine will continue in this mode until I press and hold the power button for several seconds. Looks at some other messages regarding this issue but did not find anything that solves my problem.
Thanks,
This question was solved.
View Solution.I called tech support regarding repair options and they mentioned $299 to fix it no matter what the problem. This does not sound like a bad deal.
I'll wait until my new computer arrives, move the information from the dead computer's hard drive to the new one and then send in the unit.
Thank-you for your help. -
hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)
How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad. -
Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?
Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart. -
Hey, constantly since I installed the iOS 7.1 upgrade, my iPhone has been constantly shutting down and I think it's really frustrating and I whant to know how I can stop my iPhone from shutting down so I can downgrade to iOS 7.0.4?
7.1.1 is certainly compatible with the iPhone 4. Just try a reset first.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!
My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.
You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support. -
The screen of my iphone turned to blue and then shutted down. And it couldn't power on for few days.
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More > Frozen or unresponsive iPhone -
When I open email it shuts down immediately and goes back to my main screen. Any suggestions?.
When I open email it shuts down immediately and goes back to my main screen. Any suggestions?.
Double tap your home button to bring up the most recently used apps (task bar). With your finger hold it on any of the those apps until they all start to jiggle. Each app will now show a in the upper left corner. Touch the minus on the Mail App to fully close it. Touch your home button once again to stop the apps from Jiggling, then again to get back to your home screen.
I would then Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.
Try the mail app and see if you can navigate again.
If neither option helps, it sometimes helps to delete the mailbox, then reinstall it. -
SCM / APO shut down start up; (restore) activities,procedures,best practice
Dear ALL,
What are the generic steps that need to be followed from a Functional Consultant perspective?
I am not sure if this must be part of a Basis thread
Anyone can share & enlighten the forum on this
Some of the steps module wise are
FUNCTIONAL steps
1. DP
1.1 Downloading of CVC's
1.2 Backup of all infocubes / remote query cube
1.3 Download of Planning book data
2. SNP PPDS
2.1 Download Product Master, PPM, Resource data of '000'
2.2 Download 'all order data' from the product overview
TECHNICAL steps
0. Complete off line back up of the system
1. Lock users except admin
2. Stop CIF
3. Stop live cache
What are the restore steps
Anything missed out functionally / technically is welcome
Points would be awardedHi Sridhar,
During shut down & start up of APO system, functional part
involvement is mandatory and it is not an isolated work of
basis alone.
Moreover, in addition to the steps that you have mentioned,
the following are some of the steps that you can follow it up.
1) DP:-
Before shut down:-Copy of data to other simulation versions
from active versions if required. Locking users, Postponing or
rescheduling of jobs accordingly
After shutdown:- Time series consistency checks
Validation of data, Scheduling jobs, unlock users
2) SNP PPDS:-
Before shut down:- Jobs postponement or rescheduling,
Informing users to take the necessary deliveries from stos
from snp for execution
After shutdown:- Download of planning data and validation,
Scheduling of jobs, Order conversions,
3) Technical Steps:- (CIF / Livecache)
Before shutdown:- Rescheduling of integration model jobs
if any,
After shutdown:- Scheduling of integration model jobs,
releasing locked users, Livecache consistency checks,
Delta report, Monitoring and clearing inbound/outbound
queues etc.,
Regards
R. Senthil Mareeswaran. -
When I launch PH in CC, I get a window that pops up saying, PS has stopped working, this it shuts down. Is there a fix.
These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840 -
Please help! I updated safari and yes it is an older desktop, but now all of the sudden tabs I have open will freeze on me. I can see what is going on, but am unable to type anywhere on the page! I have to shut down safari and then open up a whole new window to even attempt to get it to stop! It is driving me insane not to mention I need my desktop to work properly. I beg for someone to help me with this.
Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069 -
It's a brand new laptop and when i downloaded silverlight to stream netflix, it worked for like half an hour and then my computer just shuts down. i turn it on again and delete silverlight but a couple minutes later it shuts down again and this time it won't turn back on.
If it won't bong, then try an SMC reset.
http://support.apple.com/kb/HT3964
Can you boot in Safe Mode?
http://support.apple.com/kb/HT1564
Did you uninstall it this way?
http://www.microsoft.com/getsilverlight/get-started/install/removing-silverlight -mac.aspx -
My imac shuts down unexpectedly and now a fan is running??
Hello,
I have been working on my iMac all morning and it shut down twice within a half hour and I had to press the start button on the back to get it going again. Now their is a loud fan running and I have no idea what is going on. Help much appreciated. Thanks in advance!Hi ebeugs,
Thanks for visiting Apple Support Communities.
If your iMac shut down unexpectedly, and the fan is running unusually fast or loud, you may need to reset the System Management Controller.
I recommend following this troubleshooting method:
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
If the iMac unexpectedly shuts down again, or the fan continues running unusually fast or loud, follow these steps:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find these steps and more information about resetting the SMC here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Best Regards,
Jeremy
Maybe you are looking for
-
Installation Issue - Acrobat 9 Pro Extended
I'm trying to install Adobe Acrobat 9 Pro Extended on a system that currently has CS4. A9PE will not install saying that I have a more functional product already installed, then it terminates install. What's up with that? Is there a way I can still
-
What's the max number of E1 on 3845 and max number of E3 ports ?
kindly support me witjh the refrences that provide max number of E1's on 3845 and number of E3?
-
Hello gurus, I am trying to use the SUMMING command in SAPScript to output a total on each page of a transfer order. According to the sap help, I need to declare the summing total variable within the print program using the TABLES statement, I'm tryi
-
HELP! My iPad can't sync due to an unknown error.
When I try to sync my iPad 2, I get an error alet saying "The iPad cannot be synced. An unknown error occurred (1140)". I restored the iPad to its original settings. It then tried to restore my apps, video, etc. from my back up. Before completing
-
Needs to open history records for all the equipment installed and a mechanism to upgrade the machine history record from the job orders.. I need to know if there is any break down or any spare parts changed can it be displayed??? and can it updated f