Stop / start buffering from tv to films

hi all im new and if this has been covered apologys .
i have a 1phone 4 ios 5.0.1 -- 04.11.08 on the three uk all you can eat data plan . data speed on avarage 3G 4.6mbs - 6.7 mbs
i try and belive me i really try to watch catch up tv / filmon / netflix / ..and face a constant issue of stop start / buffering .
all i get is the progress meter and volume level i press the screen it disapears and somtimes starts to play for a matter of seconds
and then stops yet again .
i have tested my conection time and time again and gone to great leanghths to be 100% sure three arnt throtteling me .(they are not )
i have tethered my iphone to my laptop and no problems at all it just plays and plays and plays maybe once in a blue moon it may buffer normally
at peak times .
three have been very helpfull and spent a large amount of time trying to sort this problem for me to no avail .
they have sent me so many new micro sims just incase thats the coaurse .
im on to my 3rd iphone 4 still the problem arrises its not a mast issue as i have this problem nation wide .
i have used differant phones for example htc desire hd and it plays none stop with my micro sim card + adapter cover .
i recently sent a email to saga regarding sonic all starts racing game for the iphone 4 as it has conection issues over 3g and keeps droping conection.
they sent me a responce back saying we are aware of a conection issue regarding the iphone 4 on the IOS 5.0.1 .
apple are investigateing this issue and as are we .
we intend to release an update that should help with this problem .
we have been informed by apple that a update is forthcoming in the next few months .
i hope this ansewrs your question .
this kind of ansewrs my next question but want to be sure is this a well know issue you guys are facing as well ?
any body have a solution or fix around .?
thanks very fed up mailroomman

If your loop continues, why not just do a time check in that data acquisition loop? If the time expires, stop and let the outter loop reset everything.
Another thing to be aware of, since you are using USB, make sure your power settings for the bus is for Windows to never shut down the USB hub power. By default, Windows has this "power saving" feature set to turn off the USB hub if it doesn't certain activity. That might be what is causing your DAQ to hang.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

HT1379 How do I stop a program from opening at start up(iPhoto)?

How do I stop a program from opening at start up? (iPhoto)
Also, my mac recently shuts down completely while in sleep mode. Any reason why this happens?

If the app is opened when you shut down the Mac, untick Restore windows when logging back in. Open System Preferences > Users and Groups > Login Items and delete iPhoto

How do I stop extra tabs from open on start up?

How do I stop extra tabs from open on start up? When I save new tabs the next time I open I have the new saved tabs. On the next opening after that are the same 7 tabs I don't want and didn't save. edit

Make sure that the pages aren't set as multiple home page, see
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
See also:
* http://kb.mozillazine.org/Preferences_not_saved
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore

When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Stop and then start Listener from OEM

Hi,
I am new to Oracle. I notice after stopping listener using OEM on Windows XP, the TNSLNR.exe is terminated as I expected. At that point, all connections include OEM, iSQL*PLUS and SQL*PLUS should close connection.
If this is right, how can one start listener from OEM? One needs listener work before using OEM to config something else. What is the purpose of Start button for listener on OEM? Even more perplexing me is that iSQL*PLUS is still works! Does iSQL*PLUS not use listener for connection?
Your help will be appreciated,
-Hong

Hi
i think its not possible to start the listener from oem, because the oem use the listener to communicate to the db.
Regards
Mirko

Stop/Start service of Ear application from Jboss AS using JMX Mbean API.

Hi Frendz,
Please help me on this issue :)
I would like to stop/start my ear applcation from JMX Client which is deployed on jboss server 4.2.0.
Code:
ObjectName name = new ObjectName("jboss.j2ee:service=EARDeployment,url='rr-jms-ejb3.ear' ");
MBeanServerConnection connection = (MBeanServerConnection) ctx.lookup(invoker);
connection.invoke(name, "stop", null, null);
I can see the status(stared/stopped) on JMX Console based on my operation(stop/start).
But my application is always running irrespective of operation i have provided to invoke method.
My ear has both web and ejb modules and i would like to stop both modules services.
Any idea? ...please help me on this.
Cheers,
Cap

wow, you waited all of half an hour before becoming inpatient when noone dropped what they were doing to come at your beg and call?

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

How to stop the executable from starting when opened

Hi Guys,
I am building an exe with the application builder. I am not able to find a way to stop the exe from running when opened. I dont need the exe to run. I know I m missing a very basic step here but I m not able to do that.
Could anyone explain me how to do this.
Regards,
Nitin

Hello,
This is Dominic L. from Applications Engineering at National Instruments. This was reported to R&D (CAR#41DAPUQU) and was fixed in LabVIEW 8.2.1. Here is a link to the current evaluation software download for LabVIEW:
http://digital.ni.com/demo.nsf/websearch/14f9ce475127ade786256ac60070926c?opendocument
This particular bug actually renders all the build options for source file settings unusable. While the other options can be set manually in the source VI properties, the start-up VI will always run when an executable is opened.
Here are three different workarounds to this:
Option 1 - Upgrade to 8.2.1.
Option 2 - Check "Enable debugging" and "Wait for debugger on launch" in the Advanced page of the build specification. One side effect is this will include the block diagrams of the VIs and extra code for debug tool support. Note that if you don't protect the source code (block diagram), it kind of defeats the purpose of creating an executable.
Option 3 - Use a dummy startup VI to launch the desired startup VI.
For the third workaround, the attached "Dummy Startup VI.vi" uses VI server to open the desired startup VI's front panel and then closes. To use the Dummy Startup VI follow these steps:
Add the Dummy Startup VI to the project.
Open the Dummy Startup VI and change "Main VI.vi" to the VI you would like to open but not run in the project and save.
In the source files page of the build, select the Dummy Startup VI as a startup VI and the VI you would like to open but not run as a support VI.
Build and run.
I hope this helps.
Have a great evening!
Best Regards,
Dominic L.
Attachments:
Dummy Startup VI.vi ‏12 KB

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

Can't start listener from OEM. It appears as Stopped although it is not.

Hi,
I can't make the EM show the listener as running, it always shows it as stopped. I checked it with lsnrctl and it is running, but in EM appears as stopped. I refreshed the screen and nothing; I tried to start it from the EM, and it displays a message like "The listener has been correctly started", but when I check the status in EM it is still stopped. And when I check the details, it shows an error "Access denied", NET_ADMIN_ERROR,REMOTE_OP_ERROR,No such file or directory. I think I have the right credentials (I'm in the administrators group, and I have log on as batch job)
I would appreciate any help on this.
Thanks a lot
Ricardo

Hi Nicolas- here's the SQLNet and listener file:
-----------------LISTENER
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
jon =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
-----------------SQLNET
# sqlnet.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
#SQLNET.AUTHENTICATION_SERVICES= (NTS)
#NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I can't see any excess protocols in the listener. As per some metalink entries - I've commented out the "SQLNET.AUTHENTICATION_SERVICES= (NTS)" line from the SQLNet file.
Still the same problem.
To be honest - all replies to postings for this error have not worked. I've contacted some guys with the same problem - and their resolution was to completely reinstall XP and then Oracle again. Just removing and reinstall Oracle was insufficient. So - i guess i'm going to have to follow suit.
Any last minute suggestions before this bit of drastic action?!

Why has my new ipad stopped saving photos from Facebook? Problem could have started when I downloaded the new OS.

Why has my new IPad stopped saving pictures from Facebook. Worked originally and problem may have started when I downloaded OS 6.

You are correct that the behavior started when you installed iOS 6 - but as Chetan6518 explained - you now have to configure it in the settings.
Along with the suggestion above, there is also a Photos setting in Privacy and that gives access to approved apps for photos as well.
Last of all, make sure that you haven't set a photos restriction in Settings>General>Restrictions>Privacy>Photos

I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

# Question
I can't stop the Firefox Start page from opening - in addition to my default page - each time I open Firefox

Is this the Firefox branded Google page? If it is, Firefox can store multiple home pages and you may have 2 home pages set. Follow the instructions to set a single home page in this link - https://support.mozilla.com/kb/How+to+set+the+home+page
If it is the Firefox has just updated page that keeps on appearing, there may be a different problem, for details on fixing that see https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

I can't download Lion 10.7.2 from the App Store. It starts downloading but stops after anything from 5 mins to 5 hours! Help!!I can't download Lion 10.7.2 from the App Store. It starts downloading but stops after anything from 5 mins to 5 hours! Help!!

I can't download Lion 10.7.2 from the App Store. It starts downloading but stops after anything from 5 mins to 5 hours! Help!!

I'm having the exact same problem with a dual core iMac. Absolutely driving me nuts...cleared out all my caches before starting; have restarted MANY times after every failure; plenty of RAM, plenty of GBs on HDD; all else updated and my broadband working fine.
Can anyone help on this?

How can I stop power point from opening each time my Macbook Pro starts?

How can I stop power point from opening each time my Macbook Pro starts?

Remove it from the list in Startup Items (System Preferences).

How can i stop my mbp from starting up in target disk mode

how can i stop my mbp from starting up in target disk mode

It should only do that if you hold down the T key at startup. Otherwise the PRAM battery is probably near death, or the T key needs to be cleaned so it doesn't think it is being held down. To clean the keyboard properly, you will probably need to bring it in for service.

Stop / start buffering from tv to films

Similar Messages

Maybe you are looking for