Stop/Start IGS

Hello !
Is there someone who know how to stop and start the IGS? I think i have to do it, but i can't find how this has to be done.
Thanks & regards!
Chris

did u tried with tcode- SMICM
go to administation -> local J2EE instance -> soft shutdown -> with restart.
This will restart your Java engine.
Also to the integration engine configuration please refer to the link :-
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714f55ffc11d5b3ea0050da403d6a/content.htm
This will help you configure the integration engine as well as you can carry out your maintainance activity and start/stop IE.
Pls : Reward points if helpful.
Vishal

Similar Messages

How to stop and start IGS(internet graphic server)

Hi Techies
How to stop and start IGS(internet graphic server) in Solaries
IGS is 7.0 1patch
Is this the command to stop and start IGS
stopigs and startigs
If this correct will there be any issues if i stop the IGS from the above command
Thank You
Haroon

Hoi Haroon
On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
I then opened an oss and got as answer:
"To start and to stop the igs there's only the offical way by stopping and starting the sap system".
However I found a solution to start and stop:
start:
nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
e.g.:
nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
stop:
--> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
Hope this helps.
Regards Patrick

How to start IGS

Hello
I wander how to start IGS on an running BW3.5 server. I am pretty new in this areas. It is unix/oracle platform

Hi Jan
The IGS server (Internet Graphics Server) component displays and generates the graphics used by SAPGui HTML users. For example, the BW users accessing reports via the internet use the IGS server. The ITS server also channels graphics through the IGS server. The IGS server is installed as a started service on each server.
Starting the IGS instance
1.       Log on to the appropriate server as <sid>adm.
2.       Type the following:
cd /usr/sap/<SID>/DVEBMGS00/igs <enter>
./bin/startigs -p . <enter>
3.       You may log off the server.
Stopping the IGS instance
1.       Log on to the appropriate server as <sid>adm.
2.       Type the following:
cd /usr/sap/<SID>/DVEBMGS00/igs<enter>
./bin/stopigs<enter>
3.       You may log off the server.
Regards
Chen
Edited by: Chetan Seth on Mar 17, 2009 5:56 PM

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Essbase Dimension build error and Unable to Stop/Start Application

Hi All,
I am trying to build the dimendion in the ASO application it is throwing the Error meaasage " Dimension Biuld failed , ther may be problem in allocating memory".
While i am trying to and Start/Stop my respective Application it is throwing the below error meaasge
I tried to debug this issue by checking the Locked objects, and asked my Admin to close my sessions forcebully if any running and also checking all rules files . But i didn't get any clue/solution from them.
Please help me out from this issue
***ess-dev.ASOAPP     Stop application     April 15, 2009 4:15:08 PM IST     Failed***
***Error: 1013018 Cannot unload database [Sample] while user [ASDF] is performing database operation. Wait for user [ASDF] to complete the operation, or ask the user to abort it. Log out all users and then unload the database.***
***     MaxL Command     April 15, 2009 4:40:52 PM IST***
***Error: 1053012: Object [Sample] is locked by user [ASDF]***
***Error: 1013100: User [ASDF] is Active on Database [Sample]***
***Error: 1013132: Cannot build dimensions. There are other active users on database [Sample]***
***Error: 1241101: Unexpected Essbase error 1013132***
***Error: 1053013: Object [Sample] unlocked by user [ASDF]***
***     MaxL Command     April 15, 2009 4:43:28 PM IST***
***Error: 1270040: Data load buffer [2] does not exist***
Regards

Hi,
Thanks for your answer friend. My admin has successfully killed my session forcebully. And he doubted that i may not have enough rights to Stop/Start application and he provided me the required rights. After that also the error is repeating as below. we two are not getting where we went wrong.
ss-dev.ASOAPP     Stop application     April 15, 2009 8:19:35 PM IST     Failed
Error: 1013018 Cannot unload database [Sample] while user [ASDF] is performing database operation. Wait for user [ASDF] to complete the operation, or ask the user to abort it. Log out all users and then unload the database.
Help me out from this issue

HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync!

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

How can I get a stop/start button the multimedia flash player in Acrobat 9 pro

I have successfully embedded a flash movie in my pdf. It starts when I click on it but does not stop until I reloaded the pdf. Is there a way to add stop start buttons?

There is not currently a shortcut for this. That's a good feature request, though. You can submit feature requests here.

Sequence of stopping starting Primary and standby DB

Hi,
what are the sequence of stopping starting Primary and standby DB ?
To stop, which one ,primary or Standby, should be stopped first ?
To Start which one first ?
Thank you.

Hi,
what about the 10gR2 logical standbys? When I read the Note:278643.1 to apply the patch for logical database, it seemed that the sequence to stop and start the primary/logical standby was to stop the logical standby first before the stop of the primary one. Please advise me, for a simple situation just to stop and start the primary/logical standby to support a Unix server bounce, what is the sequence we should follow ? Do we have to run some commands to stop/start the SQL apply?
Any idea or suggestion will be greatly appreciated.
Thank you very much,
yKe

Stop/start logical standby db

Version 10203 on AIX
Have to stop/start logical standby db, new to data guard, Please confirm these are the steps to do that
on primary db
SQL > alter system switch logfile ;
SQL > alter system archive log current ; ( to make sure current transactions come thru)
check tail of alert log of standby to make sure these redologs shipped & mined
standby db
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY; (stop SQL Apply)
SQL> shutdown immediate;
Lsnrctl stop listener_corp_remrpt-haprimary db
SQL > shutdown immediate ;
Lsnrctl stop listener_corp_remprd-ha
Dont shutdown abort for any case, if both dbs are going down, first stop SQL apply on standby, take primary down and then take standby down)
Startup
primary
SQL>startup;
Lsnrctl start listener_corp_remprd-ha
Standby
SQL > startup
SQL > alter database start logical standby apply immediate ;
Lsnrctl start listener_corp_remrpt-ha

Hi
As you posted ,you are using Real Time Sql apply,So,it is LGWR who transfer changes to standby site.It is very safe to follow these steps for new user.
1.Stop logical standby apply(Standby Database).
2.Shutdown Primary Database.
3.Shutdown logical standby Database.
At startup
1.Start Logical Standby Database.
2.Start Primary Database.
3.Start logical standby apply.
At the case when primary database is taking long time to shutdown processed ,You can also use
shutdown abort,but before doing abort be sure you have stop logical standby apply.When your primary database started,it automatically perform instance recovery.Primary site have to resolve gap in this case.
At the case when you must have to perform shutdown abort at primary database,you can do it.By doing it you will not loose anything.Primary database has to resolve gap and it will take time to be consistent with primary site.
Tinku

Stop/Start OGG

hi,
I am using OGG and is working well (two-way replication)
Every night, my databases are stopped and started (for snapshot backup)
my question:
is it better to stop/start OGG with the database
or let OGG running all the time ?
Thanks for your help

Ideally, it would be better to stop GoldenGate and here is why:
1. You know for sure that all transactions in the source have been replicated/applied to the target. You won't have source at SCN 123 and the target at SCN 119. You won't induce a synchronization problem.
2. What if scenario - suppose while the databases are closed, something happens to the trails?
3. What happens to a long-running transaction? Do you want to deal with bounded recovery issues? (answer: no)
4. You won't be adding/generating irrelevant errors to GoldenGate processes, those about not being able to connect to the database. It just adds clutter to detail reports, and if you have any monitoring built-in, you can avoid generating irrelevant alerts.
You can use the event marker infrastructure (i.e., send a message to GoldenGate to stop replicat or other processes), or if using regular scripting, check for lag being 0 after extract is stopped.

Stop/Start service of Ear application from Jboss AS using JMX Mbean API.

Hi Frendz,
Please help me on this issue :)
I would like to stop/start my ear applcation from JMX Client which is deployed on jboss server 4.2.0.
Code:
ObjectName name = new ObjectName("jboss.j2ee:service=EARDeployment,url='rr-jms-ejb3.ear' ");
MBeanServerConnection connection = (MBeanServerConnection) ctx.lookup(invoker);
connection.invoke(name, "stop", null, null);
I can see the status(stared/stopped) on JMX Console based on my operation(stop/start).
But my application is always running irrespective of operation i have provided to invoke method.
My ear has both web and ejb modules and i would like to stop both modules services.
Any idea? ...please help me on this.
Cheers,
Cap

wow, you waited all of half an hour before becoming inpatient when noone dropped what they were doing to come at your beg and call?

HT2729 I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well. What settings can I change to

I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR.

Stop/start in PGW active/standby mode

Hi all
My VOIP Network has 2 PGW in active/standby mode. But when we add more telco, the state of ss7path is OOS. i must stop/start the PGW and ss7path is IS status.
Now PGW is running services. it processing many call with other telco.
i have question need to support.
When we stop/start PGW,has PGW disconnected all call or not?
Thank for supporting
PhaiLQ

If you restart the service on active pgw, calls are disconnected. If you don't want out of services you must pass the control to the standby server first.
From mml console of active server use the command:
rtrv-ne    to check the status, the output is:
    MGC-01 - Media Gateway Controller 2010-09-07 16:53:42.655 MEST
M RTRV
   "Type:MGC"
   "Hardware platform:sun4u sparc SUNW,Sun-Fire-V240"
   "Vendor:"Cisco Systems, Inc.""
   "Location:MGC-01 - Media Gateway Controller"
   "Version:"9.6(1)""
   "Platform State:ACTIVE"
sw-over::confirm to swich control to standby server
now restart the service
/etc/init.d/CiscoMGC stop
/etc/init.d/CiscoMGC start
P.S. If I remember the right way, the OOS (out of service) state of new ss7 path can be set in IS (in service) via mml command line without service restart.
set- your ss7 path ::IS   use tab for help
Regards.

SLD server has stopped; start the SLD server in Administration

I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
"SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
Thanks
Srinivas

Thanks for the replies!
I still have the same problem.
When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
When I open this item, I see the following error message:
"2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
Is this something related to SLD configuration.
Thanks
Srinivas

Stop/Start IGS

Similar Messages

Maybe you are looking for