STOP Status in Outbound Queue

Dear experts,
We have the following queues in our outbound SMQ1 in the ISU-CCS system.
Queue Name
MASS_CRM_CONNOBJ*
R3AD_CONNOBJ*
Destination
NONE
CMQ60TRUST
The queues are stucked when we try to perform initial download from CRM, to extract data from ISU. The further error message that we got in the outbound queue is:
Set by Host name: usahstxu; Transaction: ; Report: SAPMSSY1
Please help!! I'm desperate! This is really urgent Points will be rewarded!!
Edited by: homoSAPien on Jan 7, 2008 8:30 AM

oh well
there is another note too!
SAP note: 574774
well why we need to apply that note to CRM server need to be find out.. me also.. has the same question but never care to figured out... but now i ll do that..
this is my mail address : [email protected] if you found it.. please let me know if i found it then i ll mail you..
Regards
Naeem

Similar Messages

Outbound queue in NOSEND status

Dear All
We are doing integration between CRM2007 and lotus domino server (6.5)
And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
Regards
Subbaraju

Subbaraju,
We too are running CRM2007 with LotusNotes/Domino 6.5.
The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself.
To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue: SE16 table = ISPQTAB
I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning. If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status. Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
I also recommend sticking to the precise versions of required software:
SUN JDK or JRE 1.4.2 or higher
Sun Java Mail (sap recommends 1.3.1)
Java RunTime 1.4.2
JavaBeans(TM) Activation Framework 1.0.2
Hope this helps.
- Brian.

No Change Document in outbound queue for customer status in table VBUP

Hello all,
we face the following issue. A customer status (UVP04), changed by a customer program, is not written in the outbound queue (lbwq) to transfer it in the business warehouse.
I checked several Function modules (VERKBELG_WRITE_DOCUMENT, MCEX_UPDATE_CALL_11.....) without success.
Any help would be appreciated.
jg

Solution found: Dummy change with VA02, that generates a new record in the outbound queue.

Outbound queues are in ready status

Hi,
In our system outbound queue are getting stuck in READY status. They are not getting executed automtically from READY status we have to manually exceute them in SMQ2.
How i can clear the queue which are in READY status.
Thanks & Regards,
Koushal Solanki

Hi,
Please check if there is any standard background job available to schedule it to run for every 5 or 10 minutes so that it will check the queues with Ready status and then execute them automatically. Also, check the reasons why jobs are coming to Ready status.
Regards,
Sharath

Help with status of inbound/outbound queues

Hello SDN XI experts!
I hope one of you can offer some assistance with an XI issue we have, as we currently have no XI resource on site and we're stuck in dire straits!
We have had some problems with our inbound and outbound queues in XI, and a search of the net and SDN hasn't helped yet. Basically, if I go in to transaction SMQ1 or SMQ2, I can see that there are files (or do you call them messages?) are building up in our queues with the status READY. To process these files through XI, I am going in to transaction SMQ1 and SMQ2 periodically, and activating the queue. This sets the status to RUNNING, and the files/messages are processed successfully.
What I'm after is how do I either:
a) set the queues so that they are always in status RUNNING;
b) schedule a job to activate the queues periodically; or
c) is there some other thing I am missing?
Sorry if this is a bit vague, but I have no experience of XI at all. If I haven't provided enough info, please ask some questions. Anything you can do to help would be great as I'm manually doing this ten times a day and it's getting tiresome!

Thanks for all your help guys, it's much appreciated as I have ZERO experience with XI...
I have uploaded a screenshot of SMQR to the web, apologies for the quality, but I only have MS Paint on this desktop:
http://img405.imageshack.us/img405/7202/smqrws8.jpg
Luckily, some files have started to queue up again, so I could take some more screen shots! Here is the view of SMQ2:
http://img166.imageshack.us/img166/7086/smq2mv6.jpg
And then when I double click a queue, you see this screen with the queue in the status READY:
http://img248.imageshack.us/img248/3935/smq22ed6.jpg
Until I go in to SMQ2, double click the queue, highlight it and press activate, the files/messages will just stay in XI. After I press the Activate button on the application toolbar in the third image, the files are processed successfully. i.e. If you go in to SXMB_MONI they have a little chequered flag next to them.
Thanks for all your time guys, points will be awarded if you can help me out!

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi A

Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped

Reg:Outbound Queues are strucked in CRM

Hi All,
After Extracting Data from CRM source system,the rercords are still displaying in the outbound queues of the CRM Source system.what might be the issue?In outbound queues the status is NOSEND or is it maintaining one more copy of the records.what happens manually if the queues are deleted.if any queues are deleted the posting to BI is stopped.If any data is missed by deleting the queues ,shall we recover the data back.what are the steps to schedule the those jobs in BI.
Thanks & Regards,
MD.Kalim.

Hello,
I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
My guess is
Customer Relationship Management
Billing
Country-Specific Functions
Official Document Numbering
Transfer Official Document Numbers to Accounting Documents
Check whether there is an entry somewhere there forcing the System to behave the way it does.
Lutz

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Deleting an outbound queue SMQ1

HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
Mike

Hello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues

Urgent help- How to open Outbound queues

Hi,
I am new to SCM-APO, we have SCM 5.0 having CIF to R/3 4.7 Enterprise.
In SMQ1 i can see lot of outbound queues present with status NOSEND in R/3.
I want to push these queue manually how shoild i do it
Please guide me as i m new to this area.
Thanks
Amit

Hi Amit,
Go to Transaction /n/sapapo/ccr i.e.CIF Comparision/Reconcillation of Transaction Data. then Click on
Execute Comparision/Reconcillation Tab. Then Enter Parter System i.e ECC,then Proudct & Location.then Select Document to be checked like Production Order i.e Mfg Ordrs(with Reqs/Receipt , with Opernations),Planned Order,Purchase order etc. which you want to Transfer in ECC concern to the Product.Then Execute the Transaction.
You will find Transaction data & result Documnet.Open the Transaction Data i.e Mfg Orders or Planned Orders.Then double click on Requirements/Receipts or Operations.You will find the objects in right hand side.Select all the objects & push in to R/3 with Push button R/3.
Hope so it will help you to solve your problem.
Regards
Sujay

Deleting Outbound Queues in SMQ1

Dear Experts,
System landscape: ECC 6.0, SRM 5.0
I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
If I need to delete the queue, can you please let me know how to delete this outbound queue.
Points will be rewarded.
Thanks in advance,
Bob.

Hi Bob,
I'm not sure if I completely understand your question.
You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
Hope this helps!
Thanks,
Aravind

Detected Blocked Outbound Queues

Hi All,
We have found detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
400 R3AUBUPA0008063715       RP1CLNT400                               4 CPICERR A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
400 R3AUBUPA0008063722       RP1CLNT400                               4 CPICERR A3A4177004E04F3031E9148F 06.02.2012 20:02:49
400 R3AUBUPA0008063751       RP1CLNT400                               4 CPICERR A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
400 R3AUBUPA0008063753       RP1CLNT400                               2 CPICERR A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
Status shows CPICERR ,Error when opening an RFC connection .
But i have checked RP1CLNT400 test connection is successful .
Kindly suggest .

Hello,
Check the following notes:
[378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
[430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
Regards,
Eduardo Rezende

SMQ1 outbound queue

Hi Experts,
Could you please let me know the purpose of SMQ1 and SMQ2.
Because when i saw the transaction SMQ1 i am able to see even the queues for
0FI_GL_6
0FI_GL_7
1_CO_PA333ZPAC4.
But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
Regards,
Sunil Kumar.B

Hi,
SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
You can get more help from following link :-
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Navesh

Filtration BP date in outbound queue.

Hi experts!
I have a question. I need to stop data refering to BP in outbound queues. Information about content outbound queue, i receive from FM 'TRFC_QOUT_GET_CURRENT_QUEUES'. Now i must to stop data BP (not copy to ERP system).
Can anybody tells me, how i must do it?
Thanks.
Regards Kostya Khveshchenik
Edited by: Kostya Khveshchenik on Dec 26, 2008 12:13 PM

Hi,
Pls. mark the thead as closed if it's resolved.. if possible share the solution too..
Cheers,
Sumit Mittal

STOP Status in Outbound Queue

Similar Messages

Maybe you are looking for