Stop the carousel from moving

I've added navigation buttons to this carousel of items that
will move the carousel either left or right, however I would like
the carousel to STOP anytime an icon is at the center X point. When
a nav button is pressed, the carousel moves until the next icon is
at center X, etc.
AS and XML code posted below:
Example SWF here:
http://www.dattoli.com/temp/PlayerApplication2.html
Any help is appreciated. Thanks.
-Christopher C. Keeler

Yes, well this is the base of two of his tutorials, and I
just combined them together. I have posted the same question there
as well. I will add this disclaimer so you know that I did not
write the bulk of this: Most of above code was origianally written
by Lee Brimelow at www.gotoandlearn.com.
Thanks for pointing that out.
-Chris

Similar Messages

  • How do I stop the ruler from moving along with my guide line as I move it?

    Hello everyone,
    I am new to muse and may well be missing the obvious here, but I have a little problem, which until it is solved is a big road block to me.
    I am trying to move a guide lower on the page and can not do that because the left ruler is moving along with the guide!
    How do I lock the ruler itself, so the guide can be moved to a different position on the ruler?
    Totally weird. I have tried searching "locking rulers" both in this site and in google, but got no results at all.  I don't think the rulers are supposed to move in the first place, so am worried that nobody out there may have an answer to this.
    So I am stuck for now & I can't finish my project unless this is solved.
    Thanks for reading,
    Pat

    I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
    You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
    What happens if you uncheck rulers from top view options ?
    Thanks,
    Sanjit

  • How to stop the cursor from moving on its own when file button is pressed and then each button drops down until it stops on the far right

    wireless keyboard and mouse were switched with a usb mouse and keyboard and problem still persisted
    Problem is off and on with no set time
    problem occurs with or without internet connection
    using mt lion and have not gone to maverick

    Could you provide some more information? Is this in any specific application or all applications? Have you tried a restart? Have you installed anym new software recently?

  • HT1146 Hi, I would like to know if there is anything i can do to stop my emails from moving from the sender once i have forwarded it to some one else?

    Hi, I would like to know if there is anything i can do to stop my emails from moving from the senders name, once i have forwarded it to some one else?

    No there is nothing you can do to correct it. It is a hardware fault and only Apple can correct it by replacing parts in your Mac. More then likely the Logic board has failed. Specifically the GPU which is soldered to the Logic board so the complete logic board must be replaced.

  • Can stop the Bottomline from scrolling down or up when I moved it manually down.

    Can stop the Bottomline from scrolling down or up when I moved it manually down. It kept on scrolling until i forced a program quit.

    I Use a Mac Pro 2x28 Quad OS 10.9.3 and A Wacom Intous3 Driver 6.3.7-3
    Thank you for the fast replay.
    Mit freundlichen Grüßen,
    Michael Stubbs
    PROEXPOCONSULT
    Idstein, Germany
    Am 23.05.2014 um 22:49 schrieb Zak Williamson (Adobe) <[email protected]>:
    Can stop the Bottomline from scrolling down or up when I moved it manually down.
    created by Zak Williamson (Adobe) in Adobe Muse Bugs - View the full discussion
    Mac or Windows? What input device? If it's a Wacom tablet, do you have the latest version of the driver?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6404952#6404952
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Stop the report from firing until the user clicks the Go button?

    Hi All,
    Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
    Thanks

    Thanks for the replies,
    In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
    It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
    Thanks

  • Is there a way of stopping the battery from charging?

    Dear Apple Community,
    Recently I installed iStat Menus and found that, over the course of this year, my Macbook's charging capacity has dropped 5%. I know this isn't a massive number, but battery performance has become a concern for me. I use my Macbook as a desktop replacement, on the main. It's sitting on a mStand, connected to a large monitor on my desk. I use my Macbook to play games, surf the internet, do work and all that good stuff - basically, I use it for everything. I rarely use the Macbook without it being plugged in. I read on the Apple website that they do not recommend leaving the Macbook on charge permanently and that I should use it on battery at least one a month. As I use my Macbook as a desktop replacement, I don't actually have a lot of opportunity to do this.
    My question to you, the community, is: is there a way of stopping the battery from charging, either with the use of an app or a physical device? Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
    On the other hand, am I just worrying about nothing? Will my battery be damaged further if I leave the Macbook charging permanently?
    Thanks for your help!
    Jeremy Reid

    Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
    The charging characteristics are handled in firmware.  There is no app that would be able to do this.  You actually would not want to do this anyway.  Regularly discharging your battery to 10% will greatly decrease the life of your battery.  While it is true that you should not use your system exclusively plugged in, allowing it to run on battery a few hours a week should be fine.  Letting the battery regularly run down to (or below) 10% will cause you to use up cycles more quickly than is necessary (thereby reducing the life of your battery).  It's really a only a matter of disconnecting your Magsafe connector once in a while.
    Leaving it plugged in does not result in it being charged "permanently".  It will charge until it is full and then charging will stop.  It will only begin recharging when it reaches about 95%.

  • How do I stop the Finder from seeing SMB (Windows) shares on the network?

    I have the OPPOSITE problem most people have -- Windows Sharing works TOO WELL.
    I've donated a refurbished eMac to the local homeless shelter. I figured I'd made the system secure, and prevented any monkey business. Turns out the windows machines on the network are COMPLETELY insecure (guest access to everything is enabled). The problem is that the Mac is TOO friendly -- it automatically connects to the server as a guest, and happily presents everything to the user.
    I've tried a dozen different things (I've removed the 'Shared' section from the sidebar in the Finder windows (Go->Network is still there, Doh.), tried to turn off File Sharing, and even disabled the mount_smbfs command in the /sbin directory with "chmod 0 mount_smbfs".)
    I've asked the folks there to call in a PC tech and fix their security problem -- but it's a good question to which I've found no suitable answer... How to I stop the Mac from connecting to SMB Shares on the local network?
    Thanks.
    -JD.

    Same problem, keep getting a pop up with connection failed you do not have permission to access the server. The server is a windows 7 box, Starting happening after an up grade to windows 7. Nowhere can I find how to stop trying to connect. I am sure its at the unix level of samba but what to do is another question

  • How do you stop the phone from attempting to logon to a deleted email account?

    When I first got my phone Skype video was not available so I opened a Yahoo email account so that I could use them for video calls.  I got frustrated with the phone in that about half of the time that I turned it on it would tell me that it couldn't connect to the Yahoo servers due to an invalid password.  Other times it would connect successfully.
    I went to the default email app and found an option to delete the Yahoo account.  I even went to the Yahoo web site and deleted the email account from there. 
    I thought that I had successfully deleted the account but now I get a message that the phone can't access the Yahoo servers every time I turn the phone on.  Any ideas on how to stop the phone from attempting to access the Yahoo email servers?
    I've checked and the email app doesn't list Yahoo and I can't find any reference to Yahoo in the apps section.
    Thanks.

    Nevermind, I fixed it (I think).  I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically).  I selected it and it had an optiion to delete the account, which I did.

  • How do I stop the cursor from spontaneously going to Line one space one in Notes?

    How do I stop the cursor from spontaneously going to Line one Space one in Notes?
    I am currently working on a MacBook Pro connected by Wi-Fi or Blue Tooth to my 16GB iPhone 4S; and supposedly to iCloud.  I install every upgrade on each computer till the computer can take no more.  My current MacBook Pro continues to accept upgrades.
    I have been dealing with Address Book foibles since it first came out and the problems seem to get worse rather than resolved.
    Problem #1: When a Company Name is checked to take precedence over a personal name the record/file does not surface during searches.  This has happened for years on all my Macs, including most recently my MacBook Pro and its predecessor PowerBook G4.  How do I fix this?
    Problem #2: The Printing Defaults for Address Book Files are not useful and I can find no way to change them to my own preferences once and for all.  I must reset them for every file every time I choose to print a file.  Is there some way to set the defaults to MY preferences and only occasionally reset them according to my needs?
    Problem #3:  When entering information in "Notes" the cursor randomly and spontaneously goes to line one space one as I am entering information.  How do I stop this?  Then when I cut and paste the misplaced text to where it belongs it may or may not return to once again begin at line one space one and following.
    Problem #4:  When Printing a Record/File from Address Book I would like to use the whole 8.5" x 11" page.  Instead it prints on an 8.5" x 11" page in three columns.  Is there a way to format the output?  I have not found one and the Mac 'Geniuses' do not know of any.
    Problem #5:  Subsequent to one of the upgrades in the last year or so, the search feature does not work.  (I have had this computer since May 2011).  No matter what I type in the search line I am stuck in the 'All' Directory.  To find anyone or anything I must scroll through the address book manually.  Is there a fix to this?
    Problem #6:  Sometimes, when I try to sync my MacBook Pro and my iPhone, the records simply duplicate.  How d I undo this without manually deleting the duplicates?
    Problem #7:  Does anyone know of a third party Address-Book-type App that is better than the Apple version and can easily import over 3000 contacts information?

    '''I had the same problem when I updated to firefox 4. This is how i fixed it:'''
    The problem seems to be caused by the 'New Tab Homepage' add on. So:
    # Disable or remove the 'New Tab Homepage' add on and restart firefox.
    # Download and install the firefox add on called 'NewTabURL' and restart firefox.
    # Click on the Options button for NewTabURL and uncheck 'Select location bar after loading new tab'
    # Under the 'Default URL for new tabs' heading, choose 'Home Page'
    # Click on the Save button.
    Hopefully, problem solved!

  • How do i stop the screen from rotating on my iphone

    how do i stop the screen from rotating on my iphone when i move the phone from horizontal to vertical

    You can lock your screen from rotating. Double-click the home button, then slide your finger to the right until your get to the iPod section. There you click the icon on the left and that will lock your screen. You can unlock it the same way.

  • When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

    When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

    In Logic:
    Preferences/Audio Set Recording Delay to 0 <zero>
    This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
    On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number.  It's actually a bug in Logic, as it should always display the waveform.

  • Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.

    Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
    As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
    VERY ANNOYING.  Can I open apps in the background?

    Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works.  I found a solution that I can use in the dock from another post. 
    Annoyed by Mac OS
    Works great and allows me to maximize those multitasking minutes.

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • How to stop the Dialog from being dragged

    I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
    while a dialog is showing.
    When it is visible I can still click and drag the Dialog
    I want to set it so you can not drag it until the dialog has be closed.

    If you don't have access to the parent frame, a "hack" that usually works:
    Frame frame = Frame.getFrames()[0];
    if (null != frame && frame instanceof JFrame){
    JFrame jf = (JFrame)frame;
    JDialog jd = new JDialog(jf, "title");
    ... code here ...
    As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

Maybe you are looking for

  • Data Federator Steps

    Hi, I need some help in Data Federator. How to create Projects etc and connections? What are the steps and how does it work with InfoView, WebI and Universe? I will appreciate steps and charts besides guides. Thanks Bashir Awan

  • ITunes will not install properly on my Windows 7 PC, it keeps saying that I need Windows 8.1, what can I do without purchasing Windows 8.1?

    When I opened iTunes today it asked to run an upgrade and when I did, I was unable to access iTunes, a message kept popping up saying that iTunes was no longer compatable with Windows 7 and said I needed to install Windows 8.1, What can I do to re-do

  • Process Monitor process terminated abnormally

    Hi, I have got the following error on my live oracle8.0 database. Error Code: ORA-00472 PMON process terminated with error Cause: The Process Monitor process terminated abnormally. Action: Check the accompanying messages, and the background process t

  • Fed up with this issue

    Since i purchase my Nokia c5-00 3.2 mp(older version) i am using the memory card which i got along with the handset box.sometimes it shows there ar 100-200 mb free generally after hard reset.and after 1day it shows 30-40 mb free and finally 10-15 mb.

  • WD view Problem

    Hi all,    Iam using Adaptive RFC model in webdynpro.we have structure inside other structure in back end.so i executed that bapi that result is populated into table.Inside structure elements are getting by on clicking the outside structure.I want di