Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Similar Messages

  • How to show the data in table format when user click the Graph

    Hi,
    I have a graph in my report. If user click the graph is there a way to show
    the data behind it?
    Thanks.
    Regards,
    Jun

    Hi All,
    Any idea how to do this?
    Thanks.
    Jun

  • Copy select value in the textfield from LOV and allow user to edit it

    Hi,
    I have a datablock with 20 records and each record has comments (say field_comments) fields. I would like to allow user to choose predefined comments populated from LOV (say lov_comments) and to append some extra comments after they choose the value from LOV.
    I have created a LOV and added Return type “field_comments” in the column mapping properties. When user clicks on a button, LOV opens up. They select the value from the LOV and the value goes to “field_comment” field. The problem with this approach, user can’t add their comment after selecting from LOV.
    I tried this way too. I created another non-visible textbox (say dummy). In the LOV, I added “dummy” field as returntype. In the dummy field, I have created “POST-CHANGE” trigger which basically says :block. field_comments = :block. Dummy.
    But, the user has to click on other field to view the selected value from the LOV. The values in the “field_comments” is not updated as soon as user click on “OK” button in the LOV.
    I would appreciate it if somebody could give me some input and help to solve my issue. Thank you for your help.
    Thank.

    Well, I tried exactly what you posted and it allowed me to SELECT from LOV and then CHANGE/APPEND new text in front of returned value in the field. It saved to the database and queried without any problems.
    Is your item allowed to INSERT/UPDATE ? If not, then set "Update/Insert Allowed" properties to Yes and attach your LOV to the item and set "Validate from list" to No.
    You may also see if you have any validation being performed on WHEN-VALIDATE-ITEM or POST-CHANGE trigger which will fail since you are editing the values populated from LOV.
    Hope it helps!

  • While running the report from oracle apps

    Hi,
    While running the report from oracle apps i am getting the below error.
    First time when i ran it it works fine in the second time it is giving the below error like
    MSG-00001: After SRWINIT
    MSG-01000: Label sets failed
    MSG-01000: ORA-06502: PL/SQL: numeric or value error
    REP-1419: 'beforereport': PL/SQL program aborted
    Can anyone please give your kind advice on it.
    Thanks
    Surya...

    what is the application version ?
    is it seeded report ? or customized
    regards

  • How do I stop iTunes (10.7) from automatically launching upon restart?  "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups.  I am using a MacBook version 10.7.5.  Thank you!

    How do I stop iTunes (10.7) from automatically launching upon restart?  "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups.  I am using a MacBook version 10.7.5.  Thank you!

    Thanks for the response gakker, but I've double-checked the camera / iPhoto / Image Capture scenario, and I'm 100% positive it's got nothing to do with that.
    Plugging in my iPhone has no effect on anything related to this.
    The other thing I should have mentioned is that when iTunes on my Mac is NOT running, then nothing happens on my iPhone screen when I plug it in to my Mac. I only get the "Sync in progress" message when iTunes IS running.
    It's interesting though that you say you also get this "Sync in progress" message, albeit only for a second or two though.
    Can I just double-check something with you however... When you say:
    +"at no time was my iTunes playback interrupted"+
    do you mean the iTunes on your Mac? Because the problem I have is that the iPod-playback on my iPhone is interrupted.
    So can you clarify that for me, please? If you have music playing on your iPhone, and you then plug your iPhone into your Mac when iTunes is running on your Mac, does the music playback on the iPhone get interrupted?

  • How do I stop the Finder from seeing SMB (Windows) shares on the network?

    I have the OPPOSITE problem most people have -- Windows Sharing works TOO WELL.
    I've donated a refurbished eMac to the local homeless shelter. I figured I'd made the system secure, and prevented any monkey business. Turns out the windows machines on the network are COMPLETELY insecure (guest access to everything is enabled). The problem is that the Mac is TOO friendly -- it automatically connects to the server as a guest, and happily presents everything to the user.
    I've tried a dozen different things (I've removed the 'Shared' section from the sidebar in the Finder windows (Go->Network is still there, Doh.), tried to turn off File Sharing, and even disabled the mount_smbfs command in the /sbin directory with "chmod 0 mount_smbfs".)
    I've asked the folks there to call in a PC tech and fix their security problem -- but it's a good question to which I've found no suitable answer... How to I stop the Mac from connecting to SMB Shares on the local network?
    Thanks.
    -JD.

    Same problem, keep getting a pop up with connection failed you do not have permission to access the server. The server is a windows 7 box, Starting happening after an up grade to windows 7. Nowhere can I find how to stop trying to connect. I am sure its at the unix level of samba but what to do is another question

  • To stop Running the Report when we dont find data in the table

    I am running a 6i report and this report fetches data from custom table.
    I need to check whether data exists in the custom table in the After parameter form and if doesnt return any data then i need to Stop the report execution and write a message without raising any exceptions or errors
    note: we tried with srw.program_abort ---- it stops the report but it returns an exception
    Thanks

    Here the tricky is
    if we don't have last month data we should not go the data model. The data model query will run regardless the previous month data.
    we are trying to find the previous month data in after parameter form. if it is not there we want to stop the report there itself it should not go to layouut or data model.
    how to achive this one?
    we try to terminate the report through program_abort but it is raising an exception

  • My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

    My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

    The accessibilty setting that was mentioned is:
    * Enable AssistiveTouch
    Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
    Settings>General>Accessibility>AssistiveTouch: turn ON
    *Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

  • Key figure values vary each time the report is run by different users

    Hi All,
    We are facing a unique problem, here it goes :
    Different users are getting different values for the same key figure, when executing the same query  on the same selection conditions.Each time, user executes the report, he is getting varying values for the same key figure.Any idea's how to resolve this issue??
    Thanks in Advance
    Bindu

    Hi Bindu,
    One reason might be due to authorizations as discussed earlier.
    check how frequently is the cube getting refreshed.
    This might also happen that if users are running the data at different times and there is a cube load in between.
    check for this.
    Cheers,
    Srinath.

  • I want to fill the rows of the report from the loop

    I want to fill the rows of the report from the loop
    For example, in forms
    cursor bdl is select code,decode(:global.user_lang,1,name,2,latin_name) name
    from GL_ANALYSISHDR
    begin
         go_block('bdls');
         clear_block;
         first_record;
         for rec in bdl loop
         :bdls.code:=rec.code;
         :bdls.name:=rec.name;
         next_record;
         end loop;
         go_block('bdls');
         first_record;
    end;
    I tried to use the REF CURSOR
    But it return the values in one time and does not allow me to conduct and control of

    Why do you need to do it by a curesor loop? Can't you put the query in the datamodel of the report and simply pass the parameter to restrict the query?

  • How can I grey out the 'Next' button until a user clicks 'Submit'?

    Hi guys,
    despite how I say it or display it in slides, users don't read the instructions before the quiz. This results in them doing the quiz and then asking me why they scored zero when they answered all the questions. So my question is, how can I disable/deactivate/grey-out the Next button until a user clicks Submit after answering the question?
    I've got Captivate 6.1 on a Windows platform.
    Advice appreciated.
    Carl

    Hello Rod,
    thanks for your answer - I should think more laterally in future.
    In my testing, another question has arisen - how do I get the Next button behind the Clear button? It sounds stupid but I can't get the Next button behind the Clear. I go in to the Master Slide, click on Next to highlight it, and then move it either by the mouse or with the arrow button so that it sits under the Clear button. While Next is still highlighted I click on the button in the toolbar 'Send selected objects backward' to be sure, so that I see 'Clear'. When I go back to the Filmstrip, all I see is 'Next' and when I preview the slides all I see is 'Next' - what am I missing here? What have I failed to do? What am I not understanding?
    Advice appreciated.
    Thanks

  • How Can I print directly the report from the printer without showing it ?

    I know how to run the report from Form as it illustrate on this site:
    http://www.lv2000.com/articles/runreport.htm
    but the question here how could i to generate the report directly to the printer without showing it on the screen???
    I search on the net and I find that I should change this line :-
    SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE, cache);
    to this
    SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE, printer);
    but it is not working with me :-(
    is there any suggest ?!

    Check if any of these helps
    Re: Direct Printing in Forms10g
    Web.Show_Document() print report directly
    Direct Printing from client PC

  • Getting the error while calling the report from oaf page

    Dear all
    when i am calling the report from oaf page
    if (pageContext.getParameter("PrintPDF") != null)
    DataObject sessionDictionary =
    (DataObject)pageContext.getNamedDataObject("_SessionParameters");
    HttpServletResponse response =
    (HttpServletResponse)sessionDictionary.selectValue("HttpServletResponse");
    try
    ServletOutputStream os = response.getOutputStream();
    // Set the Output Report File Name and Content Type
    String contentDisposition = "attachment;filename=EmpReport.pdf";
    response.setHeader("Content-Disposition", contentDisposition);
    response.setContentType("application/pdf");
    // Get the Data XML File as the XMLNode
    XMLNode xmlNode = (XMLNode)am.invokeMethod("getEmpDataXML");
    ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
    xmlNode.print(outputStream);
    ByteArrayInputStream inputStream =
    new ByteArrayInputStream(outputStream.toByteArray());
    ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
    //Generate the PDF Report.
    TemplateHelper.processTemplate(((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
    "XXCRM", "XXCRM_EMP",
    ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
    ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
    inputStream,
    TemplateHelper.OUTPUT_TYPE_PDF, null,
    pdfFile);
    // Write the PDF Report to the HttpServletResponse object and flush.
    byte[] b = pdfFile.toByteArray();
    response.setContentLength(b.length);
    os.write(b, 0, b.length);
    os.flush();
    os.close();
    } catch (Exception e)
    response.setContentType("text/html");
    throw new OAException(e.getMessage(), OAException.ERROR);
    pageContext.setDocumentRendered(false);
    i am getting the error java.classcastexception at this line
    DataObject sessionDictionary =
    (DataObject)pageContext.getNamedDataObject("_SessionParameters");
    regards
    Sreekanth

    check if you have import oracle.cabo.ui.data.DataObject; in your import statement.
    --Prasanna                                                                                                                                                                                               

  • Error while Opening the report  from template builder

    hi all,
    After log in in the BI publisher template builder, tried to Open the report from the report Template . Then the message is displayed as Error occurred: ‘Please check the settings and try again’.
    I am using the OBIEE 10.1.3.3 version and Ms-Office 2000......
    Please give me the solution very urgent............
    Regards

    Hi,
    I am having the same issue. I am not able to import Crystal Report.
    the error is "No matching records found  'Queries' (OUQR) (ODBC -2028)  [Message 131-183]"
    I have previewed the report using Preview external crystal report option and is running perfect.
    please guide ASAP.
    Regards
    Sonil

  • How to Download the report from the workitem?

    Hi,
    I have one typical requirement that is to download the report from the Workitem by the manager?
    Would any body please give the solution and procedure?
    If you have any sample code for that give it tome?
    Early reply is appriciable.
    Regards,
    Chow.

    If it is an ALV report you don't have to do any coding. You don't say which report it is.
    If it is a report that uses write statements you can also export to a spreadsheet, but of course the cell matching is not quite as for ALV reports since the report creator decides the alignment. Use the menu item "System" => "List" => "Save" (the menu item names may be a little different since I have translated them from Norwegian).

Maybe you are looking for