Stop the Trust My Computer msg for my work computer that I only use for charging via USB
I only use my work computer to charge my iPhone 5 via USB. Worked fine with iOS6, but now everytime i plug it in I get the "trust this computer" message, which I say "trust".
But it shows up again when if I plug it back in. I dont sync with anything via USB (incl iTunes) on my work computer, It is only a USB based charger for this purpose.
Any way to prevent?
Thanks.
Mavericks has had a lot of compatability issues and are slowly being fixed. This is why I haven't upgraded yet.
Either downgrade back to Mountain Lion or just wait for a software fix.
Similar Messages
-
These are different problems. I want to know how to install SPSS 9.01 on Windows 7
Hi,
Which program do you want to install, SPSS 9.01 or SSPS 9.01?
To install a program successfully, you should check if the program is compatible with Windows 7.
Also you'd better follow the instruction on the program manufacturer's website and download it and then install it. Or contact the manufacturer's support directly to consult the issue as Rick Dee mentioned. In this way, your issue can be fixed
efficiently.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link. -
When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason this is happening?windows
Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
You may have an IP conflict in your network.
Check on your various network configuration parameters in your iPad, PC and WiFi router. -
I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?
Good luck and you are welcome.
Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/ -
everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed
Hello mcgivnma,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario -
My Dell computer is not recognizing my photo album when I plug it in via USB. It keeps asking me to "Trust this Computer" over and over. How do I get this to stop?
your phone is in recovery mode, which means your data is already lost. hopefuly you've been keeping regular backups
-
I have 2 iphones, 1 personal and 1 business. I thought I was supposed to have 2 separate itunes accounts. I now have a work ipad and want to only have 1 itunes account that I can use for all 3 devices. How do I cancel 1 account or just combine the 2?
I want to be able to transfer my apps from my original itunes account that I have on my personal iphone 3 and work ipad 3 to my work iphone 4S ,as well as purchase more more apps for the work iphone with the original itunes account. Plus I need to sync all 3 of them with my work tower computer. I really appreciate you're trying to help me out.
-
I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?
Authorize your computer with your Dad's AppleID.
-
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
my cursor disapears and typing stops,comes back in about 15 seconds, when I clickon something it only appears for a few seconds. Windows 7 Ultimate 32 bit, had a Microsoft lasermouse 6000, now have a comfort mouse 6000, no change, tried
updatihng the driver. HELP!!Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
My iphone is being charged via USB Cable to HP Computer; is the HP/ or any computer able to interrogate the iphone?
Interrogate? What for? Was the phone arrested for something or a suspect in some crime?
-
I don't remember my old Apple ID and I closed my email account that I was using for my old Apple ID. Now, how can I change my icloud id on my Ipad. The old icloud id is still on my Ipad.
ChrisJ4203,
Thank you for the help. Every app on my phone was downloaded using my old I-tunes ID. I just hope that they will re-download under my new ID because I still can't change it on my phone. In order to change to the new ID it says I have to sign out from the old ID and change to the new one. My problem is that I don't remember my password to be able to sign out from my old ID. Then the phone says it can change my password through e-mail and I agree but I never get an e-mail at my old address or the new one.
BHuyett -
just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??
Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings. -
System Image Restore Fails "No disk that can be used for recovering the system disk can be found"
Greetings
- Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used diskpart clean to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails. It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524 Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------
Maybe you are looking for
-
How do I authorize my new PC to purchase from itunes store? It prompts me to go to STORE menu, then choose Authorize this Computer (which i don't see anywhere) or Advanced (which I don't see anywhere).
-
I am unable to assign breakpoints in Flex Builder 4
I am new to Flex ( a month or so ) and have inherited a big project. This is an odd one. I am unable to assign breakpoints in a particular project. (I've redacted company specifics...) Here is an example: If there is a breakpoint loaded the project w
-
Why EPS files slow down InDesign CS5 and even InDesign CC? How to optimize it? Thx
-
CS 5 won't open images from Lightroom 3
Hi, I just upgraded to CS5 from CS3, and I've been using Lightroom 3 since it came out. The installation went fine. After working on some images in Lightroom 3.3, I tried to open them in CS5 12.02, and strange things started to happen. Some times the
-
Planning function in layout excel
Hi, i have attached a planning function to a layout excel with standard functionaly. If i use this layout in a planning folder doesn't work. If i use layout from bps0 it's everything ok. Is there any reason ? Thanks in advance