Stop Time Machine backups to sparsebundle on local drive

Time Machine will recognize and continue to do backups to a sparsebundle that was created on a networked drive (via Airport) and subsequently then attached locally (i was surprised to learn!). Problem is when I go into Time Machine Restore mode, it does not reference that latest sparsebundle for file recovery, but uses the previous (out-of-date) normal Backups.backupdb database files making the sparsebundle useless. I need the best way to get TM to begin backing up to my old TM database now the drive is attached locally again.
I tried Pondini’s TM Troubleshooting Tips A4 (reset Time Machine) but TM still insisted on backing up to the sparsebundle instead of the backupdb.

BilFish II wrote:
I have a similar problem, but didn't quite understand the solution...
time machine/capsule backs up my macbook. Just got an imac, and copied the image to it. Didn't realize it REALLY copied the image to it... so Time Machine decided the new imac was the macbook.
No. Time Machine always knows which Mac is which, via an identifier that's embedded in the hardware on the logic board.
But it did copy the +Computer Name,+ which you can change via +System Preferences > Sharing.+
And it did copy the Time Machine preferences file (with the backup location you specified), so it backed-the new Mac up to the same destination.
Now Time Capsule backs up the imac... but not the macbook anymore.
There is still a 425GB sparsebundle for the old macbook on the Time Capsule...
Depending on how you answered this prompt, there may be two sparse bundles:
|
|
See #B5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum), for details.
If you said +Create New Backup,+ there should be two sparse bundles, one for each Mac.
If you said +Reuse Backup,+ there should be one, containing the backups from both, and as it says, the MacBook can no longer use the same set of backups.
Question: Is there a way to reattach to that sparsebundle for backing up the macbook or do I have to start all over?
Probably. First confirm whether there's one sparse bundle or two, and roughly how many backups of the iMac you've done.

Similar Messages

Does Time Machine backup system files (/usr/local/*)?

Does Time Machine backup system files (/usr/local/*)?
If so how do you locate them in the Time Machine interface?
If I go into Time Machine mode and type say "/usr/local" in the Time Machine search bar I get nothing although I can open a terminal application and cd to /usr/local and see bin, lib, include, etc.
Of course I can never see /usr/local in Finder either ... only at the command line.
Thanks.

John, another tech pro ("baltwo") suggests:
Run this in the Terminal:
defaults write com.apple.finder AppleShowAllFiles 1
OPTION-click and hold on Finder's Dock icon->Relaunch which reveals all hidden files. Then, look for that file and delete it. To hide all of those, use the same command, substituiting zero for the one, and relaunch the Finder.

Can i resume a Time Machine backup of an attached external drive (no system, just data) on a different laptop?

I am trying to find out if I can use a Time Machine (specifically on a 2013 Time Capsule) backup of an external drive (only data, no system) attached to a laptop, and then connect that same external drive to another laptop and resume the backup? Or is the Time Machine backup of an attached external drive a laptop "dependant" backup?
Additional info: The laptops in question are 15" MacBook Pro and a 17" MacBook Pro from 2011 running OSX 10.9 (Mavericks)

You are welcome.
I don't think there is a need to start a new discussion unless you want to.
You should have more than one backup of each computer. Hard drives do fail. Time Machine can alternate drives or have a Time Machine and a clone.
The concern arises because i was told that when a wireless Time Machine backup is interrupted the sparsebundle gets sort of "locked" or "damaged", and although the backups can be accessed, no further Time Machine backup is possible. One must that a brand new backup.
Apple support article. Don't let the title bother you. Look at Additional Information, which explains what happens when a backup gets interrupted. I also am including a link for troubleshooting. C3 explains what you can try if the backup is interrupted.
Time Machine First Backup Interrupted
Time Machine Troubleshooting

Existing time machine backup wont work when my drive is attached to my airport base station

I did a full time machine backup to my external hard drive via usb (for speed) and then connected the drive to my airport base station. I can see the drive and the backup folder, but time machine wont continue using that backup and just wants to start a new one! Is there anyway I can make the existing backup usable without having to do the whole lot via wifi! I've looked throught communities but had no luck as of yet!

You can't switch from local to network backups. See the blue box in #E2 of Time Machine - Troubleshooting.
And, I hate to have to tell you this, but backing-up to a USB drive on an Airport Exteme is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.

HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

I just got a 2TB Time Capsule. I want to migrate my time machine backups on an external hard drive to the new Time Capsule. I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to. I am using OS 10.7.5 (forget which cat that is). I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup." Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
Thanks.

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
See #E3 in Time Machine - Troubleshooting to see and restore from the "old" drive.
And, you may not want to restore via the Finder; see the blue box in #15 of Time Machine - Frequently Asked Questions.

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

I threw out 24 time machine backups from an external hard drive into my desktop trash and now I can't empty my trash.

I threw out 24 time machine backups from an external hard drive into my IMac desktop trash and now I can't empty my trash.

Since you didn't mention what type of error message you were seeing, I'm going to guess on what is happening.
I'm guessing that since you threw away Time Machine backups, that Time Machine is probably active on your Mac. There is a chance then that the files you tossed are marked as in use. You can't delete files that are in use.
Try turning Time Machine off, then restart your Mac. Then try deleting them again.
Once done, turn Time Machine back on.
Tom

Is there a way to get my photos off an old time machine backup from an external hard drive?

Is there a way to get my photos off an old time machine backup from an external hard drive?

You will have to connect the Time Machine HDD and click on the Icon. You will see one folder called Backups.backupdb. Click on that and you will have to continue until you find the home folder. The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder. You will have to drag that to your desk top. Then you will have access to individual images.
Ciao.

Can time machine backups be migrated to another drive?

I'm intersted in moving my time machine backups from one external hard drive to another with larger capacity. How can I do this and still have access to the older backups? Neither of the drives are Time Capsule and they both have USB and FireWire compatibility.

What I've done - on numerous occassion when moving my TM backups from a drive of a lower capacity to ones with a higher capacity - is use Carbon Copy Cloner to make block copies of the data from one drive to another. I've moved from a 1TB drive to a 2TB drive to a 4TB drive and never had any problems. Just select the 'new' TM drive in System Preferences and the backups just take up where they left off.
ALWAYS turn Time Machine OFF when making the copy - just so it doesn't get 'confused'.
Then turn Time Machine back on and point it to the 'new' drive or drives.
There are likely other methods, but this one has worked for me.
See http://pondini.org/TM/27.html.
Good luck,
Clinton

Time Machine Backup transfer to another external drive

Hi all,
I keep my Time Machine backups on an external HDD drive (portable USB). I have a larger drive with more space, and wanted to copy my the backup to the larger drive.
My the Time Machine backup file folder is around 750GB. When copying the Backups.backupdb file over to the new HDD the process hangs in Finder. I wonder if there a way to successfully copy it, since the Finder does not seem happy to work with such large chunks of data.
Thanks

Although Apple documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
This technique will only work if the volume you're copying to is the same size, or larger than, the one you're copying from.
First, open the Time Machine preference pane and click the Select Disk... button. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the window. Authenticate as an administrator.
Delete the volume you're going to copy from the list of backup destinations. Then turn Time Machine OFF.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway.
If the volume you're copying was encrypted by Time Machine, you may have to unlock it first. Click the Unlock button in the toolbar of the Disk Utility window.
Turn Time Machine back ON and select the new volume as a backup destination. You can also continue to use the old volume, if you wish. The two will be alternated when both are available.
CAUTION: If the volume you're copying is corrupt, as shown by Repair Disk or Verify Disk in Disk Utility, then that corruption will be copied to the new drive. Don't copy data from a corrupt volume on a malfunctioning drive. Put the drive aside and don't use it until you're sure you'll no longer need the data. Then securely erase it and take it to a recycling center. Do the same if the Restore operation fails with "disk errors."

Trouble stopping Time Machine backup.

Recently I have been unable to stop time machine from the menu bar.
I tried force quit with no avail. So I resorted to kill -9 to stop it.
But could not shut the machine down without using the power button.
Any ideas or help appreciated.
Thanks

This can be the result of several things.
1. Exclude your TM disk/partition from any anti-virus scanning.
2. Exclude it from Spotlight (System Preferences > Spotlight > Privacy).
3. Be sure it's connected directly to your Mac (no hubs, and not the USB port on keyboard).
If those don't help, download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window. Copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).

Time Machine backup to AEBS external hard drive

Buy in haste, repent at leisure they say. I needed a new wireless router and thought the AEBS looked just the thing - and a quick look on the spec page showed you could connect an external hard drive via USB - great, I could back up all our computers wirelessly I thought, using Time Machine. Didn't see the small print that says you cannot do this, tho' can't see why Apple couldn't make it work.
I have had a whole string of hard drives go down in the past year, LaCie, Maxtor, WD, and two internal hard drives from a MacBook and a MacBook Pro. The only ones that seem bullet proof are the Gtech drives I have for editing in Final Cut so I bought one of those for our communal Time Machine drive.
To begin with everything worked fine despite Apple not supporting this set up. Then with a regular Software update I must have upped the firmware to 7.4.2 and the system stopped working. I discovered the problem and went back to 7.4.1 but no joy. Then, inexplicably, it began to work again later that day so I just breathed a sigh of relief. Now it's happened again - I realised that I had updated to 7.4.2 again - presumably from a Snow Leopard update, and I am now unable to get it going again even after going back to 7.4.1.
I can select the external HD so that it appears on the desk top as a wireless drive, it appears in the list of available disks in TM, but if you ask it to back up it takes an age to return a message saying it 'could not access the sparsebundle (error 109).
It seems to me I have invested heavily in a system that is never going to work but I wondered if there was some way of backing up manually over the wireless link using another type of back up system? Or are there other things I should try? I know some people seem to have this set up working fine...

The problem here is the way Apple chooses to implement Time Machine Backup in 10.6.x to a Network volume. When TM first came out myself and a bunch of similarly naive Unix hackers figured we could get the best of both worlds by backing up with Time Machine to a backed up or otherwise redundant network volume using Time Machine. But in the beginning TM didn't backup to network volumes. It does now by creating a sparse bundle on the network volume and backing up to the Sparse bundle as if it were a physical, local, disk drive. I seems logical to infer that Time Machine was written to backup to locally connected disk drives which differ from network disk drives in one very important respect: You can tell a local, physical disk drive that you need to know the status of any given write operation and you can trust that result with a reasonably high degree of confidence. That same can't be said for a write to network drive so Apple fakes it by creating a Pseudo Drive or Disk Image Drive on the network volume and writing way. The Sparse Bundle Error comes up when the Pseudo Drive wasn't put away correctly. There are filesystem repair programs to fix this condition which are described in other threads. Dig around for "fsck sparse bundle" on Google the next time this happens and you may be able to rescue things.

Time Machine backups corrupt or external hard drive failure?

My goal today was to upgrade my MacBook Pro's HD, and to restore my system from my latest Time Machine backup which resides on an external hard drive. I installed the new hard drive, formatted it as Mac OS Extended (Journaled), and selected Restore System From Backup from Utilities. The system restore was five minutes form finishing when I received an error that the system restore could not be completed, and that I should restart my machine and try again. I did as instructed, but once the system restore process began, the screen went gray, and I was told that the Snow Leopard install could not be completed.
Before beginning the process a third time, I ran Disk Utility from the Snow Leopard install disc and attempted to verify and repair the external (Time Machine) hard drive. The Time Machine hard drive could not be verified, nor could it be repaired. I popped in the old hard drive into my MacBook Pro, booted Snow Leopard, and ran Disk Utility, and tried again repairing the Time Machine hard drive. Here is the log of the error I received:
2010-12-29 21:14:30 -0800: Verify and Repair volume “Time Machine”
2010-12-29 21:14:30 -0800: Starting repair tool:
2010-12-29 21:14:31 -0800: Checking Journaled HFS Plus volume.
2010-12-29 21:14:31 -0800: Checking extents overflow file.
2010-12-29 21:14:31 -0800: Checking catalog file.
2010-12-29 21:20:22 -0800: Invalid node structure
2010-12-29 21:20:22 -0800: The volume Time Machine could not be verified completely.
2010-12-29 21:20:22 -0800: Volume repair complete.
2010-12-29 21:20:22 -0800: Updating boot support partitions for the volume as required.
2010-12-29 21:20:22 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2010-12-29 21:20:22 -0800:
2010-12-29 21:20:22 -0800: Disk Utility stopped repairing “Time Machine”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Do these errors indicate that my Time Machine backups located in the Backups.backupdb are corrupt, or is the external hard drive corrupt and failing?
The Time Machine backups are on a Maxtor OneTouch, and from what I've read, they're prone to an early demise. I've also recently noticed that my Time Machine backups started slowing. For example, I would plug in my external hard drive and if 1.3GB needed to be backed up, it would stall at 300 MB before jumping to 700 MB, stall again, then jump to 900 MB. That could be a sign of a failing hard drive, correct? If the external hard drive is failing, I can purchase a new eternal hard drive then copy the Backups.backupdb to the new hard drive, correct?
However, if Backups.backupdb is corrupt, then from what I understand, I would have to start fresh. I would prefer to not start fresh unless there's no other option, as I would be losing almost three years worth of Time Machine backups.
Any guidance is appreciated. Thanks!

ali_baba7 wrote:
2010-12-29 21:20:22 -0800: Invalid node structure
2010-12-29 21:20:22 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
It's possible a heavy-duty 3rd-party utility such as +Disk Warrior+ can fix that. It's about $100, and there's no guarantee, but it's probably a good investment for the future.
Do these errors indicate that my Time Machine backups located in the Backups.backupdb are corrupt, or is the external hard drive corrupt and failing?
The structure of the file system is damaged.
That may have been caused by the disk beginning to fail, but there's no way to tell for sure until you erase and reformat the disk and try to use it.
I've also recently noticed that my Time Machine backups started slowing. For example, I would plug in my external hard drive and if 1.3GB needed to be backed up, it would stall at 300 MB before jumping to 700 MB, stall again, then jump to 900 MB. That could be a sign of a failing hard drive, correct?
It could, but it could also be whatever's wrong with the file structure.
If the external hard drive is failing, I can purchase a new eternal hard drive then copy the Backups.backupdb to the new hard drive, correct?
No. You can't copy corrupted backups. They're all linked together, like a database, so if anything's damaged, the whole set is suspect, and can't be copied.
There are a couple of options:
If the disk is physically ok, and the directory damage was recent, you might be able to restore from an earlier backup. But since you noticed problems some time ago, the damage may not be recent.
Or, you might be able to get up and running by just installing OSX from your SL Install disk (and the 10.6.5 "combo" update). You'll be missing whatever wasn't restored in that last 5 minutes or so. Things are restored in the same order they're listed by the Finder, so it will be the last things in the last user account. You should be able to figure out where it stopped, check or delete the very last file (likely incomplete) and selectively restore as many of the remaining things as you can, via the "Star Wars" display.
Just to make things more difficult, if the disk is failing, the more you use it, the more likely it is to get worse or fail completely.
So your safest bet may be to install OSX, then download and install the 10.6.5 "combo" update. Info and download available at: http://support.apple.com/kb/DL1324 Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards. Then recover what you can.

Stop time machine from renaming my external hard drive?

im sorry if this is a repost but i couldnt find the answer to this anywhere
maybe im just being a bit thick here, but every time my time machine backs up data onto an external hard drive, it just changes the name of that external hard drive to "time machine backups", is there a way to stop this?
thanks in advance

I've never seen such behavior and TM certainly should not do that. I would not have thought it possible, actually. try resetting TM preferences. delete the file /library/preferences/com.apple.timemachine.plist. then go to TM system preferences and set it up again. if you had any folders/drives excluded from backups make sure to add them back to the exclusion list as it will be wiped out too.

Stop Time Machine backups to sparsebundle on local drive

Similar Messages

Maybe you are looking for