Stop times not working in latest update

I updated my iTunes a few days ago. Today I discovered that my stop and start times I had placed on some of my tunes have been reset to the original times. I can adjust them (the changes show in the Info panel) but that does not affect playback: the songs continue on past the stop time indicated.
MacBook Pro Mac OS X (10.4.6)

so it seems both "start time" and "stop time" should be checked for the song (on the info-options tab), as should "remember playback position."

Similar Messages

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Acrobat Pro Not Working after Latest Update to Snow Leopard

After getting the latest update for Snow Leopard I get the following when Acrobat tries to boot:
Process:         AdobeAcrobat [157]
Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
Identifier:      com.adobe.Acrobat.Pro
Version:         9.0.0 (9.0.0)
Code Type:       X86 (Native)
Parent Process: launchd [77]
Date/Time:       2010-03-31 11:25:30.253 -0600
OS Version:      Mac OS X 10.6.3 (10D573)
There is more after this but the summary is that it doesn't boot. Is anyone having this problem also? And if so how did you fix it.? I have tried uninstalling and reinstalling Acrobat but with no success.
Thanks in advance.
David

BBfolgart wrote:
Hi Michael,
Thanks for your reply. However how can you upgrade when the program won't boot? I tried downloading again from Adobe but the version that comes over is 9.0. Is there anyway to force a load? Or anyway for Adobe to push me 9.3.1?
Regards,
David
First try removing preference and or .plist files for Acrobat. Then when you get working try this tip below that might help when you update the application and it fails.
I've come across this in these forums That may or may not solve the update issue for "some" people:
<http://forums.adobe.com/message/2692924#2692924>
see if you think. it helps.

Log & Transfer not working after latest update.

I updated Final Cut Pro 6 to the latest update available. Now when I try to log and transfer my DVCPRO-HD files I'm having errors. Some kind of blocks appear all over the video and the sound is fuzzy and goes in and out like the mic is turning on and off. It was working fine for a couple clips but then it started messing up. Any ideas? Is there a way to remove the latest update?

Thanks for your suggestion, it has solved my difficulty. For informational purposes I will publish my post and the solution in hopes it will assist others.
I am running Final Cut Pro 6.0.5. My Sony SR12's drive is recognized during the Log And Transfer process. The problems continue. All of the thumbnails have a grayish/brown band going right through the middle of each one. I am able to play the clip in the Log and Transfer window but as soon as I attempt to drag the clip to the media box, FCP crashes. I had this same problem with iMovie 7 and found that updating to the latest version solved the problem. In this case however, FCP 6.0.5 is the latest version. I have the same problem with Final Cut Pro Express 4.0.1 but again, not with iMovie 7.1.4. I loaded Sony’s XDCAM software as well just in case but it did not do anything to help the situation.
When I trashed the Perian component along with QuickTime preferences it did the trick. I believe it was the old version of Perian causing the conflict with Final Cut Pro’s Log and Transfer option, not the Quick Time preferences. When I installed the newest version of Perian which is 1.1.3 there didn’t seem to be any conflict and the HD clips from my Sony SR12 imported fine with no further crashes.
MacBook Pro 17" 2.33 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Mac OS X 10.4.11
Final Cut Pro 6.0.5

HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

Podcasts badge still not working after latest update WHY??

I was hoping the latest update would have fixed the problem with the badges in podcasts! But no still the same!
It's just crazy to me they used to work before i think it was version 5.2, you just opened the podcast apps and the badges told you how many unplayed episodes you had perfect!
Now you have to open each podcast and then come out for the badge to work WHY??
I have tried to go back to version 5.1 but no Apple will not let me so stuck with this inferior version!

Take the device to Apple for evaluation, most likely the hardware has failed.

DVD player does not work with latest update

I installed the latest update 10.8.2 and now my brand new Superdrive will not work with new MacBook Pro Retina display. When I plug in Superdrive and try to start a DVD, it say "DVD quit unexpectedly......" Took to Apple store and they said it was latest update. Anyone else with this problem?

Dear all,
Perhaps you found out yourselves but the latest Software Update, called OS X Mountain Lion 10.8.2 Supplemental Update, solves this issue. I recommend you install it and restart your Mac.
When you insert a DVD in the drive and DVD Player launches, you will be prompted to confirm the region encoding (1, 2, 3, 4 or 5, based on the encoding of the DVD you are about to play). This is normal, and you should confirm it again, even if you did it previously.
Naturally, if most of your DVDs are encoded for one region and you want to play a disc encoded for another region, please remember you may make a limited number of region changes when you play other DVDs, and the last one will be permanent. So, act with caution and sensibility.
Alessandro

Apple tv not working after latest update

apple tv not working after installing latest update.

I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
how can I do a roll back on my Apple TV?

Fly out tool menus are not working after latest update-help?!

Attempting to click/hold click is not expanding the tool fly out menus in Illustrator after the latest update. I did discover that alt + left click will rotate tools, but I would still like to be able to access the fly out menus. Any help would be appreciated!

''tenderprey [[#answer-668426|said]]''
<blockquote>
So, it sounds like there's a compatibility problem. I didn't realize that Firefox accesses Silverlight in a whole different way. Do you think Firefox needs to be updated/patched to be able to work with the Silverlight plugin again, or does the plugin need to be updated to be compatible with the latest version of Firefox?
</blockquote>
First of all, I´m not a IT guy...just a fan of "firefox".
Regarding your question, since this issue started with the 34.0.5
version of "firefox" it´s my opinion that it´s "firefox" the one that
should be updated/patched to work again with "netflix".
to fix such issue.

IMessage not working after latest update (7.0.2)

Neither my wife's or my iPhone 5's iMessage are working after the latest update. We reset network settings, etc. and it didn't help. We are only using texts now because the messages don't get out otherwise. After looking it up, it would appear this is a common complaint after this update.

Hi hoatran,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If Messages and FaceTime are not working because of an activation or sign-in issue, you may find the troubleshooting steps outlined in the following articles helpful:
iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues
Regards,
- Brenden

Warp stabilizer not working with latest update

After latest update (updated 10/10) Warp stabilizer stopped working. Already stabilized clips in project show black / transparent in preview, besides small area left or right upper corner. Changing Video rendering from GPU acceleration to Software makes stabilized clip come back... however now it creates flickering to all stabilized clips. Deleting "Warp stabilizer" effect from clips removes flickering. What might help?
Editing with Lenovo Thinkpad, i7 2.4ghz, 8GB, Intel HD integrated graphics
Message was edited by: Mikko Lehvilä
Added picture

I'm experiencing a similar thing.
2014.1 (October Update) on OSX 10.9.5
For me, Warp Stabilizer is working on regular clips. But when I try to apply it to a nested sequence, the result is exactly as you describe. Video is fully visible while analyzing and stabilizing, but once stabilized it's just black (actually, I did some tests, and it's actually transparent).
I can replicate this even with codec-agnostic footage like bars & tone.
Adobe - what's up here?
Edit: sometimes I get the top-left-corner thing, and sometimes it's completely blank. Trying to track down the pattern.

Signature not working after latest update

I've been using Adobe Reader (on Mac) to write professional reports for years with no problems until the latest update. Now I can't add and save any documents with my signature. Even tried Echosign to no avail.
Before the last update, I used to place my signature in the relevant field of a PDF and clicked "Done Signing" in the Sign pane to save the completed document. Since the latest update, the "Done Signing" option is completely missing from the Sign panel and the "Save" option (under File and in the toolbar) are inactive. If I "Save as" or use "Echosign" the signature is still not visible.
My reports are my bread and butter! Please help?!?

Select Settings then Apps and swipe to All then locate and open Walkman then tap uninstall updates - Reboot and test
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Keyboard repeating not working with latest update for mac?

I just updated my Macbook Pro with a new version of Yosemite and i have come to find that the keyboard repeating function is not working anymore, even with the command: defaults write -g ApplePressAndHoldEnabled -bool false
in terminal.
Is there anyway to resolve this? I find the other character extremely annoying that they always pop up
thank you!

The repeating function you want has been off by default since 10.7 was released 3 years ago. That terminal command should normally do the trick. Did you logout and login again?

Crashing/not working with latest update on Android

I have installed the latest version of app on my Android phone and managed to log in and set everything up fine but there are now a few problems:
1) Nearly every time I open the app the notification icon (which was supposed to not show anymore) shows for a second then I get returned to my home screen. I open the app again and it does the same but eventually after opening/crashing it does work but can sometimes take 6 times before it actually stays open! (I've cleared cache, cleared data, rebooted phone etc.)
2) I've tried making calls with wifi and 3g (and also tried with wifi in airplane mode) but it always says 'call failed'.
When I run the test connection option it takes ages then says 'connection test failed, sorry but there's a problem with the BT SmartTalk service, try again later'
I've checked the service page and it doesn't report any problems!
I can live with the first problem although it's annoying but the 2nd problem is preventing me from actually using the app!

My dad also updated the latest version and he also cannot make any calls

Stop times not working in latest update

Similar Messages

Maybe you are looking for