Stop video, switch back to camera mode

My iPad mini will not allow me to return to camera mode from video mode

Just swipe up or down anywhere on the screen until the camera mode is highlighted in yellow text on the right side of the camer screen. The selected mode appears in yellow.
Swipe up and down - not left and right.

Similar Messages

How do I get my iphone off video and back to camera mode?

My camera is stuck on video and I can't get it to switch back to camera.

If you have a iPhone 4 you're probably on IOS 7.1.2 , which means you need to swipe the screen left to return to photos.

Can't switch back to 64bit mode in CS5!

I switched to 43 bit mode in CS5 clicking the checkbox in the info. section. I want to switch back but the check box is no longer visible! Where did it go and how can I switch back?

Get info on the application, not the folder.
Unless you deleted a lot of files, the switch will be there.

Iphone 6 won't lock into landscape mode, keep switching back to portrait mode

Hi,
Please help me, this has driven me nut, I can't seem to lock my iphone 6 into landscape mode, it will only lock my screen when I am in portrait mode.
For example, if I open safari and turn my phone sideway, safari would turn into landscape mode, and if I want to lock my screen to keep it in landscape mode, it won't do it, as soon as I select that screen lock button, it will turn back to portrait mode and lock my screen up into portrait mode.
What should I do to keep my screen lock at landscape mode??? I have tried this with several apps and the same thing happen, like in Calculator, when I turn it sideway and try to lock it, it goes right back to portrait mode.
I restored my iPhone 6 from my iPhone 5c so just wonder if it has anything to do with that or just some bugs in iOS8???
My current display is in Standard and not Zoom display, and I even try to set it as Zoom and then reset it back to Standard to try to see if it works and it still doesn't work.
HELP ME!!!!

I Just spent over an hour with support on this issue and apparently in iOS 8 they removed the option for the phones to lock in landscape mode. So, there is nothing wrong with your phone, unfortunately they removed a very useful feature. Maybe they will see if enough users want it they will fix it in an update.

Video switches back to Spatial Conform/Fit appearance after Fill

I have this issue where a clip in the timeline reverts back to Fit for no reason even though it is still set to FIll in the Spatial Conform option. I have tried then to switch it back to Fit/None an then Fill again but it does not change and the video displays with the unwanted vertical bars on each side.
This has happend twice now and the only option I have is to delete it from the timeline and reimport it back in, which is bit of a pain as it has speed settings and effects added. Also the problem occurs days after so is very random.
I was wondering if there is a solution to force it back to Fill rather than having to do the re import to the timeline.
Thanks in advance.
Neville
FCPX 10.0.6
OS X 10.8.2

Have you guys figured out a solution to this? or a good work around? This is my #1 problem in fcp. Im cutting 5k R3d's converted to fcp x proxies. naturally, I need the abillity to scale into my 5k image in a 1080 project. When I set spatial conform to "none" I'm able to then move around and scale into the storyline clip .
but If any connected clip is adjusted in any way like adding a simple dissolve the result to the storyline clip is
the only work around I have is to copy the file then right click the file select "reveal in event browser" go reload the clip in to the project and paste attributes. I have to do this after every edit. Its a God **** nightmare!! This makes FCP X unusable for me..

Ios 7 "upgrade" now can't activate video switch?

Video switch from apple camera app seems dead or inactive?

You scroll the video, photo, and square options. You do not touch them to change the mode.

CR 2008 Add-Ins - doesn't go back to preview mode afterwards

I created a Add-In with no problems and it all works well. But when I run my add-in, Crystal Reports switches to design mode and stays there. But when I run the Add-In that is in the downloadable sample, it also goes into design mode but then automatically switches back to preview mode so that I can see the effects on my report. I looked through the code but don't see anything that would be the cause for why it goes into preview mode.
How do I get my add-in to go back into preview mode after it runs?
Thanks.

Briefly tested -
I think it's the report state after the ReportClientDocument.Save() rather than any configurations in the Designer or settings in the report.
The record selection formula is updated, but not the report view on Save.
If I add lines to export the report (to force a report refresh) before the ReportClientDocument.Save(), then it comes back up in Preview.
Filter filter = new FilterClass();
filter.FreeEditingText = "{Employee.Employee ID} > 12";
reportClientDocument.DataDefController.RecordFilterController.Modify(filter);
reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat, "C:\\testcraddin.pdf");
Sincerely,
Ted Ueda

Cat. 3850 New-Style (or fall back to legacy mode)

Hi there,
I have a problem with the configuration of 3850 for 802.1X.
The switch was changed from someone on the "New-Style" and I can not therefore use the commands known to me.
Switch_1 # authentication display config-mode
Current configuration mode is new-style
I want to move, for example, a user who can not auth. against the RADIUS in a Guest VLAN.
Old commands:
- Authentication event no-response action authorize vlan xxx
or
- Dot1x guest-vlan xxx
Output for the command: "authentication event no-response action authorize vlan xx" is:
Switch_1 (config-if) # authentication event no-response action authorize vlan 103
Command deprecated (authentication event no-response action authorize vlan 103) - use cpl config
I think, unfortunately, no reasonable explain how I configure the "new style"?
Better yet, how can I switch back to legacy mode?
Thank you for your quick support
Greeting Alexander

Hi there,
I have a problem with the configuration of 3850 for 802.1X.
The switch was changed from someone on the "New-Style" and I can not therefore use the commands known to me.
Switch_1 # authentication display config-mode
Current configuration mode is new-style
I want to move, for example, a user who can not auth. against the RADIUS in a Guest VLAN.
Old commands:
- Authentication event no-response action authorize vlan xxx
or
- Dot1x guest-vlan xxx
Output for the command: "authentication event no-response action authorize vlan xx" is:
Switch_1 (config-if) # authentication event no-response action authorize vlan 103
Command deprecated (authentication event no-response action authorize vlan 103) - use cpl config
I think, unfortunately, no reasonable explain how I configure the "new style"?
Better yet, how can I switch back to legacy mode?
Thank you for your quick support
Greeting Alexander

Windows not reconising video switcher

Running windows via bootcamp when presenting it does not reconise vga out put via a video switcher but in mac mode its ok, when going directly a into plasma or projector it works fine in both windows and mac mode, any idea's

Could be an issue with your movie being encoded with the H.264 video codec. Windows users will not be able to view H.264 video without the latest version of QuickTime 7. If you don't want to make each PC user upgrade QT7, then your alternative is to use some other video compression codec, like Sorenson or MPEG-4. These will produce video viewable pre-QT7 but at visibly lower quality and slightly bigger file size.
I have chosen to format "for the masses" and avoid H.264 for the time being for videos on my own site. Not too big of a dealbreaker for me. Check it out for yourself.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

When i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos.

when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT A ROUTER PROBLEM. all my other apple devices dont have this problem

iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera

My wife's iPad mini is video mode; she cant' get back to normal camera mode! What to do!

My wife's iPad mini is video mode; she cant' get back to normal camera mode! What to do!

Slide your finger up the screen.

Cannot switch to camera mode to import video footage

Hello,
I've been making movies by importing small video clips from my camera. Just dragging files around, no problem.
Now I need to import footage from my video camera. The camcorder is connected but iMovie doesn't switch to camera mode. Instead I can take videos of myself with the built-in iSight. When I click the camera icon, the pop-up menu shows "Built-in iSight and Time Lapse". How can I import my video footage??
I look forward to getting HELP! Thanks!
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)

Hi Bengt and thanks for the tips.
I have a Sony video camera no: DCR-TRV25E. It is on play (VCR), not record.
I think the main pb is that I don't know the difference between FireWire and USB ;-(
I am using the same cable I use when I import photos with my digital camera (Canon) into iPhoto. As this cable fit in nicely in my video camera, I didn't even wonder about it. I shall go through my messy "unused cables" box asap!
Thanks again!
Yours anna
iMac Mac OS X (10.4.7)
iMac Mac OS X (10.4.7)

I think my ipod touch is set to camera mode and I need to switch it back. When I hoook it up to my computer it thinks I am hooking up a camera and wants to download pics. It used to read it as an ipod and automatically synch. Now it doesn't do that. HELP

When I first got my ipod, I would hook it up to my computer and it would automatically synch with my itunes. But then I took some pictures with my ipod and downloaded the pics. Now everytime I hook up my ipod to my computer, it reads it as a camera and asks if I want to download pics. It is driving me crazy. I haven't used my ipod as a camera since that one time, and I need to get it back to automatically synching when I hook it up. It's like it is not being recognized as an ipod. Is there something I can do to get my ipod out of camera mode and back to ipod mode. Also, i got a speaker system to hook up my ipod to and it is not "picking up" the ipod when I hook it up. the music will not come out of the speakers and I think again it is an issue of my ipod being in "camera" mode. HELP!!!

As mentioned in your other post, disable the camera notification, shown here: http://support.apple.com/kb/TS1500
But you'll have to be logged in with administrative rights, to change the settings.

IPhone 4 Video Mode image is larger than camera mode. Normal or Bad?

Hey there, im using an iphone 4 White. I start to browse through my device.
But something caught my eyes. Which is the video Mode.
So this how it goes, when i view my device in camera mode everything is normal.
But i switch to video mode, the image became large. Its like the device automatically zoom in..
Becaus of this, each time im taking a video, i need to take a step back..
So what im asking now is, is there any chances that it can be fix... For what i know, when im using my iphone 3gs everything works fine.
So Do help me find a solution to my curiousity.. Thank You.

I'll try to give you an explanation; I hope it's clear.
When taking a photo the iphone uses the full camera sensor (2592 pixels by 1936 pixels).
Which gets the full wide view of the lens.
In order to record video the iphone appears to only use the middle of the sensor to record (1280 pixels by 720 pixels); and it ignores the pixels around it.
Which then cuts down the field of view by almost half; and that looks like it has zoomed in.
Have a look at my diagram, red is the photo mode, blue is video mode:
This is a limitation of the hardware, as it might not get faster data from the sensor to allow the camera to shoot higher resolution, or a wider field of view.
It actually allows the iphone camera to not have as apparent aliasing issues, but certainly lowers the field of view.
Other cameras can "skip" lines to record video.
This allows for much wider field of view, but it does introduce pronounced aliasing issues (as information is "lost" inbetween the lines).
So this probably won't be fixed in the iPhone 4; although video was "added" to the older iphones by developers, it isn't likely to be that easy on the iphone4.
But you will probably hear of a higher pixel count camera in the iPhone 5, and it will possibly be able to take higher resolution video; but in a similar way it will probably only use part of the sensor.
I hope this makes sense?

Stop video, switch back to camera mode

Similar Messages

Maybe you are looking for