Stoping jobs

I'm trying to stop a blocked job, but it seems to be impossible!
job-status:
1:Job Id - 150976
-> - Properties
Status - RUNNING
Identity Domain - trialag2t
Service Instance - java
Application - demo_web
Start Time - Wed Feb 06 10:55:30 CET 2013
End Time -
Last Updated Time - Wed Feb 06 10:55:31 CET 2013
Last Updated Description - 22 hours, 1 minute ago
Operation - Deploy Application
stop or delete app:
[active-job] WARNING - There is an active job against this resource. Please retry your operation.
Any idea about it?
Thanks a lot!

Hi Albert,
This is Prakash, from cloud support team. Thank you for bringing this to our attention. I'll work with you further to resolve this issue.
To confirm your JAVA Cloud service details as below
Identity Domain name - trialag2t
Java Service Instance name - java
Issue here is when you are trying to deploy an application (demo_web) to the cloud instance the job runs for ever and you are not able to delete/stop the job.
I could see you have also deployed an application which is demo_web_cloud and which is in active state. Details are below
Application Name: demo_web_cloud
Up Since     Feb 8, 2013 7:31:54 AM
Availability (%)     100
Application Type     war
Deployed On     m0
In the same time you also tried to deploy an application which is demo_web and it takes it forever to deploy and finally it failed to deploy. Details are below
Down Since     Feb 8, 2013 7:31:54 AM
Availability (%)     0
Application Type     war
Deployed On     c1
I could suspect this application failed to deploy may be because of the same context root of the application as demo_web_cloud. This has to be verified further. You can also delete the application either from the Java service console or you can delete using the CLI (command line interface) using the SDK.
As we are in tech support team even we don't have direct access to the log files due to confidentiality, we have to internally collaborate with the operations team. So fist we will try to isolate the problem whether issue with the application or with the cloud service.
So as recommended please verify the above and issue still exists please let me know with the further details so that we can work further to resolve this issue.
Looking forward to help you.
Regards,
Prakash.

Similar Messages

Stoping/Disabling AWR Jobs or System Jobs

Hi Experts
i need your guidence in regards that i have a standby database and i use this standby database to offload some primary task/activities by opening standby database and i apply restore point . my question is when i open this standby database AWR report or other system scedual reports starts there work. if yes then how i can find which job are running and how i can stop/disable them permanently/temporarily...
my db version is 10gr2EE(10.2.0.4)
regards,

Use the DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS procedure.
interval The new interval setting between each snapshot, in units of minutes. The specified value must be in the range MIN_RETENTION (10 minutes) to MAX_RETENTION (1 year).
If ZERO is specified, automatic and manual snapshots will be disabled. A large system-defined value will be used as the retention setting.
If NULL is specified, the current value is preserved.

Starting stoping cron job

How we can tell which cron jobs are running and how to start/stop them, give me example/command plz

I do not know of any articles off the top of my head, but just remember if you can create a non-interactive script to do the job then you can run it as a cron job.
Here are several types of cron jobs that we currently use:
1. Kick off nightly hot and weekly cold backups.
2. Gather statistics weekly (on just some databases)
3. Gather performance statistics (perfstat) when wanted.
4. Perform audit gathering/deletion jobs.
5. Check for errors in alert logs and trace files and send out emails if needed.
6. Check status of listeners and database processes to assure they are still running.
7. Move log files to archiving storage
We are going to eventually move a lot of these jobs to OEM Grid Control but until then cron is great.
Regards
Tim

BIP scheduled job stoped work

BIP with OBIEE 10.3.4 on Orace database. Both OBI and database are on Redhat Linux. We have a few scheduled report to be sent to a printer. It wors fine for many months. But two days ago they stopped work. There is not error messges in BIP Schedules page. In the Schedules>Schedules page, all scheduled job are still there within the data range that scheduled to run daily. In the Schedules>Hiistory page, reports are seen up to 2 days ago. There are no yesterday and today's records.
Where to find useful info to debug this? Any tips to fix it?
Thanks.

The reports haven't been scheduled last two days. In case the schedule is still there, there might be something wrong with actually loading them in the scheduler.
You could restart the scheduler service, and/or the complete BI server.
Have you tried manually scheduling a report, to run immediately? What happens?

Questions on installtion and ram please help! Pc tech with new Job!

Im a Pc tech with a new job Im am in charg with a new Mac network . So Im great at PC.s just fuzzy on Macs.
Here is my problem.
IMac 17" flat panel.
New Hard drive , new cable (IDE), Tryed to install New OS ( just OS X) got throught the first 5 mins in the installer , the it stoped and told me that it had encountered an error and to restart.
Now I get an error 139 installer has unexspetanly stopped.
Press return to reboot.
Now pressing return never works have to hold start button to reboot.
Ran hardware test of cd Im gettting a a mem_/2/4 error.
I assusm that is a bad stick of memory? There is only 1 stick in there.
I belive that its using pc133 256meg for memory.
I have put a few pc133 sticks in the mac but none will work eather get a bad memory beep or no display .
Does it have to mac memory or special latency ?
Have opened the firmware and reset -all -nvram and defaults
Have remove Air Port card and all other stuff , onlly keyboard and mouse and power cord .
Does that sound right? If you need more info let me know.
Any other clues?
Any book that an tech like me (6 years fixing pcs) should read for macs? thanks for all your help in advance.
James
G5 Mac OS X (10.2.x)

Another thing to consider, a free to use download (donationware) is
MacTracker; a small data base of Apple and Macintosh product specs.
If you don't already have it, see: http://www.mactracker.ca to download.
Some online manual sites had unauthorized copies of protected works
and those sites were pulled from the internet; but they had service
manuals in pdf for many models of computers. You may be able to get
the official versions of pdf manuals through a subscription service for
an annual fee; this may require searching and asking questions. It may
also require an IT budget you may not have, to get a Mac-only archive.
At one point I was given some technical support information to trouble-
shoot my own ailing under warranty Apple computer(s) and the information
is very helpful, when you have a need for the details they contain.
I was careful to use them for non-invasive troubleshooting only.
One older online source appears to have ftp:// links, but I was never
able to make them work. The site may not have valid content or could
be somehow blocked; so if you find such a site by searching for older
Apple Manuals online, it may not yield anything. Or it may be illegal.
Some of the low-end RAM chips can be problematic; I found at least
one to add major issues in my iMacG4 and made it hard to diagnose
another major hardware problem. Tossing the cheaper RAM (at retail
was higher cost than decent RAM) was the best thing; got a better one.
There should be a little information on boot ROM (firmware) per model in
the MacTracker database you can use offline. You may need to know more
about the use of Open Firmware in Macs. Hope this helps some.
PS: for a time, you could get tech manuals on CD from places
such as http://www.applerescue.com/ (they have OS installers
on disc for sale there, primarily) and also a search of the web
may get you a source of tech books for repair service.

Background Job BICCMS_111_20100526* (program RSBATCH_EXECUTE_PROZESS)

Dear Friends,
We are using BI 7 system.
We have restarted the system few days back.
After the restart we have observed that there is a job running for every hour.
The job name starts with BICCMS_111_20100526* (It is executing a program called program RSBATCH_EXECUTE_PROZESS)
The Job log displays the below messages:
Job started
Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000000207130, user ID ALEREMOTE)
Process chain COMMUNITIES_NEWSLETTER has status "G" (log ID 2AN8LZN1DCCFF9WLZPITD5ZL7)
Process chain COMMUNITIES_NEWSLETTER has status "G" (log ID D3VZG4S9FEZHZ2KVD0CV9PGFF)
Process chain COMMUNITIES_NEWSLETTER has status "G" (log ID B0LDW40H15U898R2RWYX1HJZF)
It is executing a program (RSBATCH_EXECUTE_PROZESS) which is checking the status of the each process chains multiple times.
The job is occupying the system resources quite frequently and affecting the data loads.
Could you please let us know what is this Job doing ?
How to stop this Job (Not able to stop it in SM37) ?
What are the consequences of stoping this Job ?
Thanks,
Ram.

Hi Rama,
Thank you for the reply.
The problem here is i am not able to find the scheduled/released job with that name.
I have stopped the active job (SM37) and i have killed the work process (SM50) many times which is just stopping the current active job.
But after an hour time the job is again getting executed.
Thanks,
Ram.

DBACOCKPIT job error when running backup job to LAN network folder

Hello all
I have set up a network location through MSSQL Server Management Studio from
Server Objects -> Backup devices
and using SQL Server Managemnt Studio i can backup Full or Log to that network locaion.
When in SAP using DBACOCKPIT i can see the backup device which i defined in the SQL but when i run a job to backup FULL or LOG then i get the following error :
SQL Job information   ******************************
Jobname:    SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-095438]
Type:       TSQL
DB-Name:    GDW
For Run:    20110725 09:54:38
Job history information *****************************
Stepname:   CCMS-step 1
Command:    declare @exeStmt nvarchar(2000) exec gdw.sap_backup_databases @dbList=
            "master,msdb,GDW",@r3Db="GDW",@bDev="@FisticFULL",@expDays= 27,@jobNam
            e= "SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-09543
            8]",@bkupChecksum="N",@bkupCompress="N",@bkupType="F",@nativeBkup="N",
            @exeDate = "20110725095438",@bkupSim = "N",@format = 0,@init = 0,@bkup
            Db = "master",@unload = 0,@exeStmt = @exeStmt OUTPUT
Status:     (failure)
Message:    2528
Severity:                                                                                15
Duration:   0 hours(s) 0 min(s) 0 sec(s)
Last msg:   Executed as user: NT AUTHORITY\SYSTEM. Must declare the scalar variabl
            e "@FisticFULL". [SQLSTATE 42000] (Error 137) Incorrect syntax near t
            he keyword 'with'. If this statement is a common table expression, an
            xmlnamespaces clause or a change tracking context clause, the previous
             statement must be terminated with a semicolon. [SQLSTATE 42000] (Erro
            r 319) DBCC execution completed. If DBCC printed error messages, cont
            act your system administrator. [SQLSTATE 01000] (Error 2528). The ste
            p failed.
                    <----
End of Job Step History -
>
Job history information *****************************
any ideas?
thx in advance

Hello Marcus
I went to the link which you mentioned and there is nothing mentioned about hot to give rights to the user NTAUTHORITY\SYSTEM in order to do network backup.
I have done the following:
at server A which i my backup server i have a folder which i have it shared with full permissions for everyone.
At the SECURITY there is also full rights for everyone and for local admins.
From Server B i went to services and i stoped the SQL SERVER service and i set it up to log on with a user which has Administrator rights in the DOMAIN.
From server B i logged on with administrator and i defined at the SQL Server Management Studio at Server Objects -> Backup devices a new backup device with the network path.
The thing is that i have to go with windows explorer to the network location of where i want to do backup in order to put my domain username and password and after i can run the backup by the SQL Server Management Studio.
Do you know where do i need to give authority to NTAUTHORITY\SYSTEM in order for my backup to work from the SAP - DBACOCKPIT?
thx in advance.

Print job stopped without reason

hi, i am connected to a network printer. whenever i try to print the job is stopped unexpectedly and no error message is given. It just says: "Job stopped" in the printer window and stays in the active queue. if i click "start jobs" at the top it starts again and stops again. With out reason. The printer driver are installed. The kind is NRG DSc38u PS
Hope somebody can help.
thanks

When ever I have this problem I restart the printer by unpluging it and waiting for about 30 seconds. Then if that doesnt work, go hook the printer directly up to the computer and make sure that someting is not stoped in the printer que.
I hope that that helps you.

Duplex printing stoped working after one of the recent updates.

Hi,
For some reason my HP Laserjet P3015 stoped printing duplex. Some dialogs show the "beidseitig drucken" option and I can check this and get duplexing. But I configured duplexing in the HP printer settings and it is ignored. I had system settings from earlier times with the option enabled but they seem to not work any longer. So how do I set up a printer to print duplex from all applications?
Thanks for helping me saving trees!
Best
Stefan

It is possible to set duplex as the default setting via CUPS - the core printing system used in OS X. Using a web browser you open an internal web page, select the printer you want to modify, make your changes and then save this as the default. Then when you print, this setting will stop you from having to access the driver menus.
But there is a caveat to this setitng being used and that is based on the application being used. If the application uses or involves the default print dialog in the print job submission, then you will get a duplex print job. But there are applications that bypass the default print dialog and will therefore submit the print job without the settings you have set. The Print icon in Word for Mac 2011, part of the MS Office 2011 suite, is an example of the print dialog and thus the default settings being ignored. But if you select File > Print in Word, this will invoke the print dialog and your defaults will be honoured.
To access CUPS, open Safari and type
http://127.0.0.1:631/printers
Note that for OS X 10.8, the CUPS page is blocked by default. To enable it, open Terminal and type "sudo cupsctl WebInterface=yes" (without the quotation marks). Enter the admin password when prompted and then refresh the browser view.
With the CUPS web page open, select the printer you want to modify. Then from the Administration drop menu, change to "Set Default Options".
This will show a new page with some menu headings (links). You may have to check each one but one of them will have the duplex (or two sided) setting. With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
You can now check that the change has been successful by selecting to print this page from Safari. With the correct printer selected, change to the relevant menu to ensure you modification has worked.

Stopping Background job in Risk Analysis and Remediation

Hi,
We have scheduled background job for Batch Risk Analysis in CC 5.3. Later we have terminated that job for some reasons. But that terminated job status is showing as Stopping from past 3 days. How we can cancel that job?
We have restated the J2E server but the job is still running. Please suggest me how we can stop that job immediately.
Regards,
KKRao.
Edited by: KKRao_2020 on May 12, 2009 9:14 AM

Hi,
If you have access to oracle backend then I can tell an work arround for this issue,
when the job is in stoping status then you can delete an entry from VIRSA_CC_JOBHST table.
The command is
SQL> delete from VIRSA_CC_JOBHST where jobid=your jobid and status=3;
After running this command the job in the RAR will show aborted status then the delete button will be enabled and if you want then you can delete that job from RAR screen.
Regards,
Sudip.

Sql server job failing some times and suuccessful some time, even when it should run succesful

Hi Experts,
I got stuck with some issue....please help me resolve
1.I created job -> calling SSIS package
2. In SSIS package ->
(I) firstly i have zip file container
(II)second i have Execute process taskk editor - here i am doing unzip - in side On query cancel i have package failure if correpted file comes.
(III) loading into table using bulk insert
Problem:
When i run the job it's working fine most of the times.
But some time job executing still Execute Process taskk editor and after that job is getting canceld as follows"The job was stoped prior to completion by (unknown)" even through i have proper file(which is gettng unzip manualy).
Please help me to resolve this issue...

What is the SQL version you are on?
Is this applicable for you?
http://support.microsoft.com/kb/922527
Satheesh
My Blog |
How to ask questions in technical forum

Ssrs subscription service Job not trigggering

Hi,
I am using sql 2012 standard edition-and server is configured n single box on azure vm-
there is DNS/AD/Sql/SharePoint/Project Server 2013 are all in same box on azure- no problem on performance complain till date on performance.
2 parties hosted their servers on this same box-
1st party have DNS name and AD with their company name say contoso.com
2nd party is my client-but here he uses office 365 enterprise edition- so don't required AD/DNS/etc- say TechNet.com
Issue- is-when I configured ssrs report subscription service-email are not triggering ?
this link I am looking to resolve email issue-
https://technet.microsoft.com/en-us/library/ms159155(d=printer,v=sql.110).aspx
Any suggestion pls
thnks

Hi mafab,
Generally, when you create an subscription, several things are added to the RS server:
A row is placed in the Subscriptions table.
A row is placed in the Schedule and ReportSchedule tables.
A SQL Server Agent job is created.
When the subscription runs several things happen:
The SQL Server Agent job fires and puts a row in the Event table
The RS server service has a limited number of threads (2 per CPU) that poll the Event table
When it finds an event, it puts a row in the Notifications table and
starts processing
So, from the snapshot you have provided, we can see that the subscription haven't run yet. the issue can be caused by many facotrs, it can be caused by the SQL Angent Job stoped or your SQL Sever Reorting Service is stoped at the time of the Last Run time,
it can also caused by someone changed the schedule time in the job like below:
Please try to find the details error message in the log file to help us better analysis about the root cause. The path of the log file like:(please find the correct date of the log file)
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
Good blogs about troubleshooting of the subscription issue:
http://blogs.msdn.com/b/deanka/archive/2009/01/13/diagnosing-and-troubleshooting-subscriptions.aspx
http://blogs.msdn.com/b/deanka/archive/2010/02/16/troubleshooting-subscriptions-part-ii-using-the-report-services-trace-log-file.aspx
If you still have any problem, please feel feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstance

Hi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan

Report program when run in background job getting cancelled immediately

Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT         = IS_LAYOUT
        I_SAVE            = 'A'
        IS_VARIANT        = GS_VARIANT
      CHANGING
        IT_FIELDCATALOG   = IT_FIELDCATALOG
        IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani Yeluri

Hi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan.

Report Job was cancelled upon user request???

Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thanks

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

Stoping jobs

Similar Messages

Maybe you are looking for