Stopped dataguard... how to restart?

Hi,
I have a 9.2.0.8 dataguard. Unfortunately I finished the disk space in the standby host and now the media recovery process is shutdown. From the alert.log I read:
Errors in file /prodtech/PROD/proddb/9.2.0/admin/PROD_gamiodbrec/bdump/standby_mrp0_1093944.trc:
ORA-01237: cannot extend datafile 53
ORA-01110: data file 53: '/proddata/PROD/proddata/ra_txn_ind08'
ORA-27072: skgfdisp: I/O error
Additional information: 1
Some recovered datafiles maybe left media fuzzy
Media recovery may continue but open resetlogs may fail
MRP0: Background Media Recovery process shutdown
Now I just added more space to the filesystem. How can I restart the media recovery process?

Dear Insaponata,
Copy the relevant and needed archivelogs from production to the standby archivelog destination and run below command;
alter database recover managed standby disconnect from session;Please also check the v$archived_log fixed view for non-applied archivelogs on the standby database.
Hope it Helps,
Ogan

Similar Messages

KMC Migration Tool stopped. How to restart avoiding the finished steps?

Hi,
I'm using KMC Migration Tool for upgrading EP 6.0 SP 2 (6.20) to EP NW04 SPS15 (6.40). We have experienced some network problems, and the process of DB migration has stopped between the end of the migration of task AP - completed suscesfully (the last step of the Migration the DataBase, many hours!!) - and the begining of the synchronization the fsdb Repositories (only a few minutes). When I tried to restart the process of DB migration, the KMC Migration tool tried restarting all the migration tasks from the begining of the DB Migration.
How to restart avoiding the finished steps? How can I avoid to repeat the migration of the DB from the begining, especially if it has executed suscesfully? Can I synchronize the FSDB repositories manually at the end of the EP migration? How can I do it?
If I had to restart the process, is it necessary to restore the target DB, or the process does not insert records from the last execution?
Many thanks for your help,
Best regards,

Hi,
CM repositories in FSDB mode can have a manual backup before configuring the local root. The XML file provides the description of behaviors and persistence levels for the file system. To have a manual backup the auto sync has to be deactivated or else there will be a huge meta data loss.
what i feel is like you have to restore the DB before manual bacup(.if the Auto sync is activated). However, i dont think so that you can resume the migration.
Regards,
Anand

Automatic Workload Repository Snapshots stopped ! How to restart

Hello,
On a 10.1 database when I try to create a ADDM report (Database: DBNAME > Advisor Central > Create ADDM Task ) I get a warning the following Warning :
Insufficient Data in Interval. For displaying data on this page, two historical snapshots are needed. Make sure that two snapshots are present in the target database instance. In addition modify the interval so that it is contained within two available snapshots.
if I check the AWR snapshots (Database: DBNAME > Automatic Workload Repository > Snapshots
)I notice that I have no more snapshot since few days.
I have search how to start again the Automatic Workload Repository Snapshots, but I did not found how to do it.
Some body can help to restart the AWR snapshots.
Thanks in advance !!!
Best regards
Gaspard Amiet

Hello Chandra,
Select snap_interval from dba_hist_wr_control; Return : +00 00:10:00.000000
Before It was to 1 hour and I change to 10 minutes.
statistics_level=TYPICAL, that is the default I think.
One more point, on this database the AWR snapshot work well before.
Best regards
Gaspard

TS1424 season pass stopped downloading, how to restart?

My season pass stopped downloaded after three episodes. iTunes store recognizes I'm a season pass holder, recognizes that I have only downloaded 1-2, recognizes that episode 4 is available ... won't download. Any suggestions?

You have already purchased it, so don't worry about having to pay for it again. In the Mac App Store, go to the purcahses tab, select the Mountain Lion download, and either click the "X" or hit the delete button on your keyboard to remove it. Then, go back to the page that you originally bought Mountain Lion from, and download it again.

Apps stop loading how to restart

I'm trying to download some apps from the newstand so I can buy their magazines but the icons are greyed out and it just says waiting. How do I reset them? Thanks

In order, try these suggestions.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - a song or video .... if you have a download in there that did not finish, complete that one first. A stalled download in iTunes can cause app downloads to stall and go "waiting" on you.
4. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. If you cant delete them that way, try deleting them in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.

My callout toolbar stopped working abruptly. Restarted computer. Still doesn't work - how do I get the tool back?

My callout toolbar stopped working abruptly. Restarted computer. Still doesn't work - how do I get the tool back?

The tool is called a “callout” note. It places a text box with a leader. It’s been working just fine until suddenly it stopped working and I get an error message saying “desired operation cannot be performed on this object”. It doesn’t matter where I try to place the callout. It simply stopped working. I have tried restarting Acrobat. I have restarted my computer. I have used multiple files to ensure the issue isn’t with a corrupted file. Nothing works. The tool simply stopped working.

I just bought a new macbook air and while transferring documents from my old computer to my new one it stopped working, how do I restart the transferring process (it won't force quit on the new one)?

I just bought a new macbook air and while transferring documents from my old computer to my new one it stopped working, how do I restart the transferring process (it won't force quit on the new one)?
I NEED HELP

jesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

The swoosh sound my iphone5 made when I moved mail to trash has stopped. How do I get it back?

The swoosh sound my iphone5 made when I moved mail to trash has stopped. How do I get it back?

First quit and restart Mail and see if the sound returns. BTW it is selected in Settings > Sounds correct?
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
If that doesn't work try a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

ICal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

iCal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

A bug in Mavericks. When I open Calendar, I get a message "Moving calendars to server account." Calendar freezes and this message goes on interminably. The only way to stop it is to restart.

Mavericks (OS 10.9) is buggy. When I open Calendar, I get a message "Moving calendars to server account." Calendar freezes and this message goes on interminably. The only way to stop it is to restart the system. How do I fix that?

Hi
- I had the same problem and I suddently found out:
Close (quit) calendar
Under System-Icloud : log out
Open calendar. Under preferences, Account, Icloud: log in !!
And it works!!
now the stupid ""Moving calendars to server account" is gone!

How to restart services?

hi,
we are using hyperion 11.1.1.3 version which is installed in linux server?Can anyone tell me how to restart the shared services server like we do in windows version...n 1 more question..
how to start interactive reporting and financial reporting from linux server?if possible can u give me the path(example)
Thanks in advance...

Hi,
If you want to stop and start all the services, (I am assuming the Hyperion Home, check as per ur HYPERION_HOME)
Go to:
1) /Hyperion/products/bin
2) you will find stop.sh and start.sh
If you want to start a specific service: (Assuming Tomcat, check the locatin of your application server)
/Hyperion/deployments/Tomcat5/bin
here you will find Shared Services, along with few more.
use stopSharedServices9.sh and startSharedServices9.sh
Cheers...!!!

How to restart OracleXe service in windowsXP?

how to restart OracleXe service in windowsXP?
by sample for restart: mysql:
service mysql restart
OracleXE howto?
thanks

go to
Start > Settings > Control Panel > Administrative Tools > Services
Look for the Oracle Database Service. If I remember correctly, it's something like Ora<Instance_name>.
Hit the Restart button, it's the button with the icon that's a stop and start.

How to restart adpatch interactively

Hi All,
I am in the process of upgrading my EBS 11.5.10.2 to 12i.
Currently applying patch 6678700,I started the patch with 48 workers...
Now the server seems to be hung and all workers except 1 is in waiting state.
One worker is running ap_holds_all.xdf for 2+ hrs now.
Is there a way to restart the adpatch,with less no.of workers?
If I stop the patch and restart it with "continue from previous AutoPatch session" option,it's not asking for no.of workers.
Is it safe to stop the patch and re-apply without continuing from previous session?
Any help is highly appreciated...
My Env:
DB:11.1.0.7
OS:Solaris 10
Thanks in advance....

Currently applying patch 6678700,I started the patch with 48 workers...
Now the server seems to be hung and all workers except 1 is in waiting state.
One worker is running ap_holds_all.xdf for 2+ hrs now.
How many CPUs do you have on this box? Please make sure not to go above 1-1.5 * Number of CPUs
Is there a way to restart the adpatch,with less no.of workers?
If I stop the patch and restart it with "continue from previous AutoPatch session" option,it's not asking for no.of workers.
No.
Is it safe to stop the patch and re-apply without continuing from previous session?
Yes.
Thanks,
Hussein

HT1338 built in camera has stopped working, how can I update or reinstall the drivers

Built in camera has stopped working, how can I reinstall the respective drivers?

Here are my best suggestions for your camera problem, Stephen:
• If you have not already done so, shut down Mac, restart,
    and try again. If the camera still does not work, continue.
• Try ALL relevant suggestions from Apple's Troubleshooting
   article: http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   If you need to use the "reset" suggestion, use the correct reset for your Mac.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your Mac OS,
   the current version is at http://support.apple.com/kb/DL1640
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
• If nothing else resolves your problem, yours is likely a hardware issue.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.8.3

HT204389 Siri stopped speaking - how to fix?

Siri was responding back to me aloud, but has now stopped. How can I fix this?

Basic troubleshooting of the device is reset, restart, restore (first from backup then as new). Has any of this been tried?

My ipod touch 4th generation ipod camera stopped working how can i fix it?

My ipod touch 4th generation camera stopped working how can i fix it?

Basics from the manual are restart, reset, restore.
Try each of these.

Stopped dataguard... how to restart?

Similar Messages

Maybe you are looking for