Stopped Playing LBC Radio, but plays otherv stations from the same radio group!

Hi,
As well as mounting issues, when I access LBC via Google it will now will not play. Yet will play other stations, just not LBC.
Crazy!
Regards,
Russ. 

Did it works on another device ? check it first because it may have chance that they withdraw support for that.............

Similar Messages

  • I cant call to a mobile number since yesterday, but can receive call from the same number. I am using iphone 4s. Is there any setting error?

    I can't call to a mobile number since yesterday, but still can receive call from the same number. I am using iphone 4s. Is there any setting error?

    you have to make sure that CFWD Bridge Mode under the Line tab of the SPA9000 where the SPA400 is registered is set to ALL...include VMSP Bridge and XFER Bridge Mode as well..power cycle then check if you are still getting one-way audio
    | isolate! isolate! isolate! |

  • How do I set up AppleTV to share play iTunes libraries from the same Mac

    I have a Mac Pro (2008), running Lion (10.7.3), Airport Extreme running 7.6.1 and a 2nd gen AppleTV running 4.2.1.
    On the Mac Pro, I have 3 user accounts (User1, User2 and User3), each with their own iTunes libraries. I have enabled Home Sharing on each of the user accounts/iTunes with a same AppleID and enabled Home Sharing on the AppleTV with the same ID.
    On the AppleTV, under Computers, I see the 3 'computers', but only 1 of them will play content, depending on the order that I start iTunes on the Mac Pro.
    When I log in to the 3 users and start iTunes in each, only the first user I start will play. For example, if I start iTunes with User2, User1 and User3, then only User2 content will play.
    The AppleTV reports, 'Cannot connect to User1 library' and to make sure that iTunes is running.
    I have a seperate Mac Air, and when I setup Home Sharing on it, the AppleTV has no problem playing content from it and from the Mac Pro.
    The odd thing is that when I first set it up, it worked as I would expect. Content from each library would play and could freely switch between them. But after playing a movie from User1, none of the other User's content will now play without shutting down iTunes in the 3 accounts and starting them back up in a different order. I have restarted the AppleTV, the Router and the Mac Pro and zapped PRAM.
    Is there a way to be able to play from all 3 accounts/libraries on the Mac Pro?
    Thanks for the help!

    Welcome to the Apple Community.
    Dont really have an answer for you, I've seen this reported before, it works fine for me and I can't see any settings that might make any difference.

  • Repeatedly Changing AXI BAR 0 Address Register but Microblaze Keeps Reading from the Same Address

    Hello,
    I work on a project based on AXI PCIe Bridge.
    What I am trying to do is access a userspace memory block directly from a Microblaze (or DMA).
    So far, I use posix_memalign() to allocate a block of memory in the userspace which has the size of the page (4K).
    Once I allocate this block of memory I fill it with data.
    Then I pass its pointer to my kernel driver where I use get_user_pages() and a few other functions to create a scatter/gather list in order to get the physical addresses of my userspace pages (so far I get one physical address since I have allocated one page).
    The next step is to write that physical address to the AXI BAR 0 address register.
    I validate that the correct address is written at this register.
    Then I ask the Microblaze to read the data from this physical address but I get different data.
    After reading the data I ask the Microblaze to write new ones at this address.
    I repeat all that procedure by allocating new memory block filled with different data in my userspace.
    Then I pass the new physical address again at the AXI BAR 0 address register.
    This time the Microblaze reads the last data it wrote itself.
    It seems like the Microblaze always reads/writes from/to an unknown address even if I repeatedly give different physical address at the AXI BAR 0 address register.
    Are there any suggestions?
    Could this be a cache coherency issue?
    Trying the "cache coherency issue" approach, though, did not solve the problem either.
    I have, also, tried a different case which worked.
    I used pci_alloc_consistent() in my kernel driver and I gave its physical address to the AXI BAR 0 address register.
    Then the MIcroblaze writes and reads data from/to this block of memory correctly.
    The kernel driver verified that the transfers are correct since it read the same data that the Microblaze previously wrote.
    This approach always worked for every new allocated block of memory.
     

    Hello,
    I work on a project based on AXI PCIe Bridge.
    What I am trying to do is access a userspace memory block directly from a Microblaze (or DMA).
    So far, I use posix_memalign() to allocate a block of memory in the userspace which has the size of the page (4K).
    Once I allocate this block of memory I fill it with data.
    Then I pass its pointer to my kernel driver where I use get_user_pages() and a few other functions to create a scatter/gather list in order to get the physical addresses of my userspace pages (so far I get one physical address since I have allocated one page).
    The next step is to write that physical address to the AXI BAR 0 address register.
    I validate that the correct address is written at this register.
    Then I ask the Microblaze to read the data from this physical address but I get different data.
    After reading the data I ask the Microblaze to write new ones at this address.
    I repeat all that procedure by allocating new memory block filled with different data in my userspace.
    Then I pass the new physical address again at the AXI BAR 0 address register.
    This time the Microblaze reads the last data it wrote itself.
    It seems like the Microblaze always reads/writes from/to an unknown address even if I repeatedly give different physical address at the AXI BAR 0 address register.
    Are there any suggestions?
    Could this be a cache coherency issue?
    Trying the "cache coherency issue" approach, though, did not solve the problem either.
    I have, also, tried a different case which worked.
    I used pci_alloc_consistent() in my kernel driver and I gave its physical address to the AXI BAR 0 address register.
    Then the MIcroblaze writes and reads data from/to this block of memory correctly.
    The kernel driver verified that the transfers are correct since it read the same data that the Microblaze previously wrote.
    This approach always worked for every new allocated block of memory.
     

  • My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in

    My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?

    Hi Cassilecompte,
    If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • IT tunes music - some, a lot, of somgs stop playing half way through. the files are all ok and complete? ive tried downloading / updating but no joy?

    IT tunes music - some, a lot, of songs stop playing half way through. the files are all ok and complete? ive tried re - downloading / updating but no joy? can anyone help its most annoying

    Yes, in theory re-converting would lessen the quality further. However, I have heard people claim (unsubstantiated) that if you are encoding with the same encoder at the same bit rate, then since it will use the same algorthymn, it won't really change the file. I have absolutely no idea if that is true or not.
    But... I figure some slight loss in quality re-encoding is still better quality than a song that only plays half way and then stops, right? I suppose you could always tag those files in the comment section with something like "Re-Encoded" and then later if you gain access to your old CDs, you can then make a Smart Playlist to gather those songs and then re-rip them again from your CDs.
    Cheers,
    Patrick

  • TS3700 why does my music stop playing when i press the sleep/wake buttom? it says the screen turns off but the music should be playing

    why does my music stop playing when i press the sleep wake button? it says that the screen should turn off bu the music should still keep playing

    This is usually a sign that your headphones are not plugged all the way in.  Make sure the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen.
    If you are 100% positive that the earbuds are all the way in, double check to make sure the headphone jack is clean and clear of debris and/or damage.
    B-rock

  • When listening to music on ATV, it plays two songs from the playlist, then won't play any more.  You can see playlist and songs, but won't respond.  Any ideas?

    When listening to music on ATV, it will play two songs from the playlist, then no more.  You can see the playlist on songs, but it won't play.  Turned everything off, reset the network...nothing works.  Any ideas?  It used to play fine...for hours at a time.

    Hi.  Thanks for your reply.
    It is happening via "shuffle" in a playlist.  Always two different songs within the playlist.  You can see the next song on the screen that should, theoretically, be playing...but nothing happens.  Even when you push "play" on the remote, it doesn't receive the command. 
    I reset, then restored ATV.  Now, it doesn't limit itself to two songs, but does stop after a few.  The more trial and error I do, the more I believe the problem is with Homesharing in iTunes.  If I turn off Homeshare, then turn it back on, a couple more songs will play in the playlist.  I have shut down iTunes, restarted computer, completed updates, but nothing seems to change it.
    It used to play fine for hours on end, but has now found this glitch.

  • My ipod touch 4 stops playing and re starts itself while playing one tune from the 2011 Manheim Steamroller Christmas album.  It also will not work with Tony Bennett Duets II.  It calls each tune a different album giving it a different place in the play l

    My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album.  It will not work with Tony Bennett's Duets II.  It calls each tune a different album.  All other music appears to work fine.  Both of the mentioned albums were loaded from CD not from Itunes.  Any ideas?

    My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album.  It will not work with Tony Bennett's Duets II.  It calls each tune a different album.  All other music appears to work fine.  Both of the mentioned albums were loaded from CD not from Itunes.  Any ideas?

  • HT204406 I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have reset both devices.

    I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have rest both devices.

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • I brought an album and one song plays half way and then just stops playing and skips to the next song

    i brought an album and one song plays half way and then just stops playing and skips to the next song

    - Try a reset. Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Delete the songs and redownload by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    I believe there is no  "Export to Tape"  feature as appeared in legacy FCP.
    SORRY! Just noticed you are using FCP 6.
    You need to ask this question in the Final Cut Studio forum.
    Message was edited by: Ian R. Brown

  • Why does iTunes play consecutive songs by the same artist so often?

    Is there a way to stop or greatly reduce the issue in iTunes of playing consecutive songs by the same artist when playing in "shuffle" mode?  There was a slide tool in preferences that allowed you to set that to "less likely" or "more likely" but that appears to be gone from iTunes now, or at least I can't find it.  Not that it matters much, the problem was WORSE when they added that "tool" anyway.  It was less likely before they added whatever that algorithm was.  Now this happens constantly that my iPod plays 2 or 3 consecutive songs by the same artist when I am playing it in shuffle mode.  I have over 3500 songs on my iPod but it will usually play only a small percentage of those before starting to repeat also.  It seems to "stick" in a small area of the alphabet when in shuffle mode.  Meaning, it will play artists whose names begin with say L through R and ONLY those artists, then repeat a bunch of them after playing only 20-30 songs.  Everything else seems to be working fine on my iPod but this.  I suspect it's the programming in iTunes but of course, I have no way to prove that and Apple being the quasi Communist gov't type that they are, I can get no answers from them on this or most questions I have.  Maybe somebody here has encountered one of these issues and can offer some resolution?

    I wish Apple would just remove the feature that supposedly addresses this issue.  It worked better when there was no setting for this.  I'm just tired of being pencil whipped by Big Brother.

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • How can you listen to music and play a game at the same time?

    How can you listen to music and play a game at the same time?
    I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
    It seems like this should be possible.
    Message was edited by: RuthlessVengeance
    Message was edited by: RuthlessVengeance

    Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
    Mike

Maybe you are looking for