Stopped while restarting my blackberry curve 8520

hi, need some help, while i restarted my bb curve 8520 it was stucked not open anymore...it just halfway then stuck...and now it was totally not restarted...please give some tips on how to fix it..thanks...

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
You also may want to attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Blackberry curve 8520 doesnt stop vibrating!!!

    Hey; I posted about my blackberry curve 8520 not stop vibrating; but its been like if for about 2 weeks; its really starting to annoy me now; ive even tried a new battery; can anyone please help me; i really regret buying this crappy phone!

    (Goes well with a crappy attitude, eh?)
    While you do have a previous thread running on this same issue, I'll offer my advice here anyway...
    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out. It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My Blackberry Curve 8520 keeps restarting​!

    Hello everyone
    For the past 1,5 month my Blackberry randomly chooses to reboot itseld once or rwice a day. In addition the battery drains itself very quickly (barely lasts a day despite very limited usage). I bought a new battery but the problem persists. Any info would be much appreciated.
    Device info
    Your carrier: Vodafone Greece
    Model info and OS version : Curve 8520, v5.0.0.681 (Bundle 1168, Platform 5.2.0.67)
    Apps and free space
    File free 113784813 Bytes
    Did a battery pull fix your issue? NO
    Apps installed and their version if possible:
    eofficeMobileDataAlerter (version 310.907.171.758)
    Foursquare (version 3.1.5)
    LinkedIn (version 1.5)
    Player of youtube (vesrion 1.2.94)
    Quintessentially City Cuides (version 1.5)
    ScanLife Barcode Reader (vesrion 3.1.17)
    WeatherTrax (version 2.400)
    WhatsApp (version 2.6.7421)
    Numerous Blackbeery apps like App World, Messnger, Docs to Go, Brickbreaker, Messnger, App Center, Memopad, Sudoku, Tasks, Passoword Keeper, Texas Holdem King 2, Twitter, Windows Live Messenger)

    Hello MuffleSnufle,
    Perform a reload or upgrade your BlackBerry® Device Software to address the issue with your BlackBerry® Curve™ 8520 randomly restarting. For more information on this procedure see the following article:
    How to update or reinstall BlackBerry Device Software using BlackBerry Desktop Software - http://www.blackberry.com/btsc/KB03901
    We hope this helps.
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Mi Blackberry Curve 8520 no se reinicia

    Hola, el día de hoy mi Blackberry Curve 8520 se auto-reinició pero en la pantalla inicial, donde la barra va marcando el avance del inicio, se atora después de haber marcado un avance del 70% aproximadamente y no hay modo de que avance y concluya el proceso para poder usar el dispositivo... ¿qué puedo hacer para solucionar este problema?
    Gracias!!!

    Thank you for your advise, I really apreciate it, I wrote in spanish since I wasn't aware of the other site.
    In this case I'd like to get help with my device since it self-restarted and then it won't reload the OS again, it stops on the black screen where the Blackberry logo is shown above the progress bar and when it gets to a 70% it won't move and I need to know if I can do something about it or if I must go to a service center in order to get the device fixed.
    I already removed the battery, applied the soft reset and anything is working.
    Thank you again for your help

  • BlackBerry Curve 8520 Emails

    Hi,
    I can receive emails on my BlackBerry Curve 8520.
    However, I cannot respond to emails.
    Please advise.
    Thank you.
    Solved!
    Go to Solution.

    Hello Lyner47
    Please try those in the same sequence :
    1- Register your Handheld .
    KB00510 : How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    2- Delete and Resend your Service Book
    KB05000 : Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 : Send the service books for the BlackBerry Internet Service
    ( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
    3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
    After reboot please check if you're able to send or reply to any emails , If problem persists then refer to this Knowledge Base and try those suggestions :
    KB02567 : The Send option is not available when forwarding or replying to an email message from a BlackBerry smartphone
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How to solve this problem 'Uncaught exception: dssma: invalid state(5): 25 in blackberry curve 8520?

    HELLO, I have blackberry curve 8520. i have got error in my phone. the error is "Uncaught exception: DSSMA: invalid state(5): 25. I am unable to open my Inbox messages and unable to view phone's call history. the phone shows the same message again and again 'Uncaught exceptionSSMA: invalid state(5): 25'. Please help me how to solve it? I am unable to read sms in my phone. Please help me.
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!!
    There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
    Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    If it won't boot up cleanly, then you may need to try Safe Mode:
    KB17877 How to start a BlackBerry smartphone in safe mode
    There might be an updated code set from the carrier -- check them via this portal:
     http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
    Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
    KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
    The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Curve 8520 not working correctly

    My Blackberry Curve 8520 is not working correctly. It has worked on and off for about 2 days now.
    The first thing to stop was the media files - at first it said the SD card was inserted, but couldn't find any files. I've tried repairing the card. Then it is said there was no card inserted. Have taken out and re-entered the card, and formatted it. It now says there is no card inserted again. 
    Also, Whatsapp and BBM are not working. I can open them, and can type a message, and press send, but no message actually sends. 
    Plus the screen keeps freezing, will only work again through a battery pull. 
    I've had the phone for about 3 months.
    Please help!

    Hello Sarahhelen,
    I would suggest backing up and doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HELP PLEASE! Blackberry curve 8520 - keep getting stuck on "white screen"

    Hi i only have this blackberry curve 8520 for like 3 days and already its getting stuck on the "white screen" i experienced this problem with my previous blackberry and after several battery removals it broke and wouldnt turn on again and NOW this new blackberry with the same white screen problem! please HELP ME ANYONE PLEASEEEEEEEEE!!!
    thanks  

    Do you have a media card installed? If so, remove the battery while the phone is powered on, remove the media card (leave it out), then reinsert the battery and let the phone fully reboot. See if that makes a difference or not.
    "Cats may taste like chicken, but they have more bones than rabbits."
    Blackberry 101
    Tips & Tricks
    Videos to learn from on youtube

  • BlackBerry Curve 8520 BIS not connected

    Hi,
    I got a BlackBerry Curve 8520 at work and for some reason my BIS is not working, it says not connected and I cannot manage to fix it. The below is what I did so far.
    1. Verified with my carrier (MTEL.BG) that I have all necessary data serivices enabled.
    2. Restarted the handheld a couple of times (battery pull and waited 30 secs).
    3. Resed to factory settings.
    Tried to register my device using Host Routing Tables (the table is empty) but nothinh happen.
    Called Tech support and they attempted to register my devide without success. They said that probably my handheld have a defect and to replace it.
    Somehow I believe that either my carrier or me are missing something and this must be fixable.
    Any ideas?
    EDIT: My phone signal is always edge but I noticed that workmates (with BIS working) have EDGE instead.
    Thanks in advance!
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    A few thoughts...
    Cabeza2000 wrote:
    I got a BlackBerry Curve 8520 at work and for some reason my BIS is not working, it says not connected
    Since this is "at work", is it a BES-level BB? If so, then you will need to check with your BES admins...it is possible for them to block BIS services via IT Policy.
    Cabeza2000 wrote:
    Tried to register my device using Host Routing Tables (the table is empty) but nothinh happen.
    That is very indicative. You should receive one message from your carrier when you register the HRT. If not received, then no other things will work. So this must be resolved first.
    I suggest, as above, that you talk to your BES admins.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Curve 8520 Keyboard not working

    A few months ago the keyboard of my Blackberry Curve 8520 stopped working out of the blue, I checked the water damage indicator and it is was still white.  I left the phone and used a spare one, so I knew it was nothing to do with the sim card.  Yesterday I decided to check on my blackberry and it worked! Then this morning at 8am the alarm went off, I turned it off and left my phone alone but when I went to use it at 8:30 it had completely stopped working, not even the trackpad.  A few hours later the trackpad started working again but that's it, no keys or any of the side buttons.
    So now as soon as the screen goes black that's it you have to do a battery pull to get the screen to light up again.
    This is very annoying and has been going on since April now and I would really love to know what causes it, anyone know?

    If you can tell that it is not a harware issue or what not, then it may be a software issue that can be fixed by a clean reload. Please check the link below to guide you through the steps.
    How to update BlackBerry Device Software using BlackBerry Desktop Software for Windows
    Goodluck and let us know if this resolves the issue.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • How to reboot or restart or refresh curve 8520 without removing and refixing battery ?

    How to reboot or restart or refresh curve 8520 without removing and refixing battery ?
    Solved!
    Go to Solution.

    Soft reset:
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=64C8797ED4CAB08C34C13D91377C1704?...
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • How to downgrade my blackberry curve 8520 from version 8.2.0.18 to version 5.1

    Good day,
    I wipe my phone and want the older version of Blackberry and still i battle to get my facebook and bbm working.
    Please help me to downgrading my Blackberry curve 8520 to older version.
    I dont want version 8.2.0.18
    I battle to get my facebook working and dont like this new version
    please,please help me!!!!
    regards

    Hi and Welcome to the Community!
    The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry curve 8520's screen keeps going white

    i have a blackberry curve 8520 and for about the last 2-3 weeks the screen has been going white nearly everyday at random times . last night i was watching a video on my phone on youtube and the screen went white . this also sometimes happens when i am watching videos on youtube , when i am surfing the internet on my blackberry throughout wi-fi , its sometimes just happens when i am just on the blackberry and after a reboot . when the screen does go white i take the battery out and put it back in ,it reboots and sometimes just before the reboot is finished it goes white or even after the reboot is finished it goes white straight away. i then have to put it on charge throughout the blackberry charger or the blackberry usb . yesterday i downloaded blackberry desktop manager and connected my blackberry to it and done a back up and then i tried taking the battery out and putting it back in and i never got the white screen but i started getting it again . please help and please be specific on what is causing this and how i can stop/prevent it 

    Hi Solidbass,
    You need to consider updating/reinstalling your device OS again.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • My Blackberry Curve 8520 will not let me read my bbm.

    My Blackberry Curve 8520 will not let me read my bb messages. how do I fix this? Why on earth does blackberry not have a number I can call rather than this stupid thing!!

    CoryH wrote:
    What is your:
    OS Version (Options > About)
    BBM Version (Options > Applications > Change drop down to Add Ons > Scroll to BBM)
    At what point does it stop you from reading your messages? Will the application launch but you are not able to pull up any conversations?
    I am not one of those trained people, I'm a user like everybody else but I've gained a lot of technical knowledge through use and research. Sorry to disappoint.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • My Blackberry curve 8520 wont turn on or charge

    My blackberry curve 8520 doesnt turn on and when i try to charge it , there is just the red LED light and the screen shows up some picture which shows a red cross on top of a battery. I also tried to connect this to my computer but it doesnt respong and also try with another blackberry original battery it showing same . but when i put my battery to another blackberry phone that phone is turning on properly . please help asap.

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Access Child Node of a dataset

    I'm pointing to "root/data" in the XMLdataSet as var mdoReg I'm using spry:region and spry:detailregion Of course I can easily retrieve the node values of {name}, {usr}, {key} and so on. -- but how do I access the children under <contacts> and <links

  • JDBC receiver adapter for AS/400 DB2

    Hi guys, We have developed an Idoc to JDBC scenario for inserting data in a Z-table of SAP R/3 that sits on an AS/400 DB2. When testing it, message Mapping is executed successfully, but in communication channel monitoring, we get the following error

  • Trace application activity in Database side

    Hi all We are using Oracle database 11g (Release 11.1.0.6.0 - 64bit Production) for database and a billing system for client application. Every end of month we are running bill calculation from the front end of our billing system. The thing i want to

  • HP all screwed up AGAIN..

    Some years ago I bought some HP equipment and had no end of problems with this crap. I vowed never again - but I went and bought another HP product - must have my bloody head read! The same story all over again - bought a Deskjet printer D1663. Simpl

  • Display Country Name in the Form

    Hi All, I would like to do printing of the address data in the form but I'm not using the control command ADDRESS - ENDADDRESS due to I can't re-arrange of display the address data in 1 lines only. My current problem is how I can display the country