Stopping a recording after each track

I have an odd request...Is there any way to stop a recording after each track? Such that there are three tracks on a recording, after each track I would like the CD to stop. After it has stopped, I would like to be able to push play and move to the next track. That is, I put the CD in the player, push play, the CD plays track 1, and then stops; I push play again, and the CD begins playing track 2, and so on. I have Logic Pro and iTunes, which I have used to create the tracks and compile onto a CD. Using these can I create a CD with these parameters? Any advice would be helpful, and thanks in advance for your time.

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

Similar Messages

Ipod stops after each track ends in a playlist?

I have a problem: Suddenly, my ipod stops after each track ends in a playlist. This happens with every playlist and every track, all of which worked fine until this week. All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling. I have not updated any software or added any new content to my ipod. I imagine that some setting has been switched on or off, but I am unable to identify which one. Please help as these are my audio books! Thanks!
nano 6th gen

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

Smart Playlists Stop Playing After Each Track

After updating iTunes to version 10.0.1.22 my smart playlists stop playing after each track. All songs or Podcasts in my smart playlists are checked so they should be playing consecutively but they're not.
Any help would be appreciated.

Make sure the little boxes to the left of the song names are checked. If you need to check all the songs in a single view at once, hold the CTRL key and check any one of the boxes.

Stop after each track?

Is it possible to set the nano so after each song is played, it stops playing and won't go to the next song unless you press play again?

Selecting a single song MAY do this already. Just make sure "repeat" is turned off. But are you talking about from within a playlist, artist or album list? I think it will automatically advance to the next song.
Edited: I just tested it. The single song trick works only if there is one song from an album or artist. If the artist or album has more than one song on your iPod, this may not work.

Podcasts stop after each track

Hi,
How do I make each podcast play after another? At the moment one will play then stop, and another will not play.
Thanks

Yes. I think a Smart Playlist would be your best bet. You could probably base it on Album name and then it would add new podcasts as you download them. (That's if you want to create the list to hold a specific podcast and not all podcasts in your library.)

IPod Classic stops after each track

I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops. I have tried checking the gap less album box (what is that for by the way) but it makes no difference. Third question, can I make a book copied into iTunes an Audiobook? How?
Thank you!

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

I-Phone stopping playing music after one track

I have a i-phone 3G and when I use the i-pod function it will play music fine until the next track and then it will stop and go back to the main i-phone screen. Anyone got any ideas why this is the case?

Are there check marks beside all the songs in your itunes library? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other.

Cant play tracks continuously - stops after each

Hi there - sorry, tried to do everything I could before resorting to this... I just got a new computer with Windows 7 so downloaded the latest iTunes and imported my library - all good except it stops after each track and doesn't play the next. So I uninstalled it, downloaded it again, and the same problem. Am I just being dumb and is there some setting I need to change? Thanks!

For unknown reasons, iTunes seems to have a bad habit of unchecking all the tracks when you reinstall or update. Certainly not always, but often enough that after every update there are a few people with the same problem.
Glad I was able to help.

QT Pro 7.6 stops while recording DV from camera

Can anyone help me understand why QT pr stops my recording after 12.25 GB with an error that says it has reached the maximum recording length?
I have a disk with OS X extended journaled formatting and it as more than 200 GB of free space.
Thanks

Hello,
Even if you have enough space on a hard disk to store the recording, it can stop due to lack of space on the boot volume (where the OS X boots).
Because during recording process, the movie index and other information is stored in memory, and when you run out of memory, it is stored on the disk cache, and when you run out of disk cache, well ... recording cannot continue.
In any case, if you need to recover the 12.5GB file, free app Treasured can help you:
http://aeroquartet.com/movierepair/download.html
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Regards, BJ

Stopping tracks after each play

I broadcast athletic events and I'm using iTunes to play clips from ID's, to interviews and highlights. Is there any way in iTunes to get each item to stop after each play....so that it wont automatically go onto the next track?
Thanks!
Scott

Also, if you type in the title of the track at the top where it says "search," as long as there's nothing with too similar of a title, it will show only that one track that you typed in, and it will stop when it's over. It's almost like making a temporary playlist of the items containing only your search terms. That's what I do because I have far too many tracks to check/uncheck them each time I want/don't want one to play.

Track stops recording after about an hour

Hi Everyone,
I am trying to record from some old tapes in order to create mp3s. The track stops recording after about one hour. The Tape is over one hour long. I read about a similiar problem in the forum and tried dragging the purple timeline marker to the right but it won't move any further. What is this called and what does it do? I also read about changing the sampling rate, but I cannot find where to do this. Where do I find documentation on this?
Many Thanks for any suggestions.
Regards,
Bill

Garageband 3 doesn't record more than 1999 beats (GB2: 999). Since in your case the beats don´t matter, you can lower the tempo to the minimum (40 bpm) to get a maximum recording time of 3:18:48.
As for the sample rate: You can't change the export sample rate of GB, it's always 16 bit, 44.1 kbit/s (internally GB works with a higher resolution).

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Can You Get iPod To Stop/Pause At The End Of Each Track

I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.

Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers.

Midi stops recording after two measures

I am recording midi parts using a virtual instrument, Logic's piano. Recording stops after 2 tracks. Play continues. I am using an E-Mu 25. Can anyone offer trouble shooting techniques?

Do you have autopunch or autodrop on?
If you just hit record on a MIDI track but do nothing, does the recording still stop?
Does it behave the same on an audio track?
Does it do this in allsongs?
Does it do this in a fresh song? (Option-click on File -> New)
Does it do this if you trash your preferences?

Audacity randomly stops recording after a few seconds

I've been trying to record a few things with audacity, which has generally worked pretty well for me in the past.
However, whenever I try to record a second track, it only records for a second or so after I hit the record button, and then randomly stops, although the cursor keeps on moving forwards and the meter keeps showing the input.
I haven't been able to find any reason why it would be doing this, and it is EXTREMELY fustrating. It has also done this when I tried to record for the first time in a new project, but I switched a few settings on and off again and it worked for some reason. Can anyone offer any help?

Is this still a problem for anyone? I came here looking for help and found more questions, so I started randomly playing with the input settings. I have an Ensoniq (es1371). Choosing OSS/DSP gave me an error trying to read the device; choosing hw0:0 or 0:1 had it stop recording at just over 0.6 seconds; turning software playthrough on or off had no effect. What finally worked was "ALSA:Default" and use alsamixer to control the recording source.
At the risk of being branded a linux hater, I should mention that the same hardware under Windows "just works" without any changes needed in the input settings on my part. I fired up Windows 7 in a vmware window - so not only did the Windows environment work correctly out of the box, that was with the additional layer of alsa -> vmware -> windows.
Last edited by WyoPBS (2009-06-06 18:51:54)

Stopping a recording after each track

Similar Messages

Maybe you are looking for