Stopping a Vault backup before its done??

Anyone had to stop a vault backup before it is completed? External HD had to be disconnected.
On reconnect will it pick up where it left off or do I need to start the whole process over again?
I am creating a new vault on a new external for the first time. It is some 80GB and takes some time to create. Not sure if I just waste an hour and half or it will pick up where it left off?

From what I remember (not tried this in a long time), it will pause the update at the point it got to, and carry on from there next time you update. If you click 'Cancel' you should get a dialog box asking if you want to cancel and telling you exactly what will happen if you do.
Ian

Similar Messages

How come when I stop and start an audio clip before its done...

How come when I stop and start an audio clip when before its done, that when I play it it only plays part of the file?

I'm not sure if I got you right, but do you mean that it's like pausing...
I have never played an audio clip with java, but if this is the case, maybe you have to rewind the clip.
/J Lindroos

What do I do if I disconnect my iPhone out of my mac before its done updating?

I took my phone off before it was done importing. I hit stop importing but it didn't do anything. I now can't quit IPhoto and I cannot shut down my MacBook Pro.

The iPhone does not run ActiveX. That is proprietary to MS Internet Exploder.

Any way to quit vault backup safely?

I'm currently backing up my Aperture library to two vaults, each located on external hard drives. I very foolishly daisychained three external hard drives and then started to backup my vaults to two of them, which of course, is taking a ridiculous amount of time to complete (about 7-8 days already).
Is there a way for me to stop the vault backup process without doing damage to the library or without having to Force Quit?
Thanks

Thank you. I assume that each file in the Trash bin has to be dragged one-at-a-time to the desktop file? That's going to take some time. I didn't see any way to select all files at once. Apparently the Trash bin isn't a file since I can't find it anywhere under Finder. Thanks again.

Backup to Vault Fails Before Switching From Copying Masters to Next Step

My backup to a Vault in Aperture 3 has failed.
I have successfully upgraded to Aperture 3 from Aperture 2. Everything works well, except backing up to a Vault. I have attempted to save the entire library to two different drives - one internal and one external, both empty and tested as OK in the Disk Utility. The backups - multiple times - simply stopped at the same place. The usual sequence is copying masters and then versions, but the full backups never went beyond copying masters. I’ve set up additional libraries of individual projects, and those libraries backed up to vaults with no problem. I had no problems with saving to a Vault with the Aperture 2 library.
I’m using a Mac Pro with Snow Leopard (10.6.2), 2x2.66 Dual-Core Intel Xeons, and 10gb of memory. There are four internal drives, and two external drives connected by a firewire connection. The computer and drives are unchanged through the transition to Aperture 3.
Any suggestions?

I Have exact the same problem.
Originally updated a 150 GB Library from 2.1.4 to Ap 3; Backing up to a NAS based Vault stops after doing the masters.
I ended in reinstalling Ap 3, and Creating a new library from scratch. Reimporting the upgraded library worked fine, but Vault freezes like before.
Creating gain a new library and Importing original masters and versions step by step. After every import Vault backup works until now (60% done).
I m curious wether it will work when I m finished.
All my keywording etc. will be gone then !

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

I can't use my IPAD 4 because its say Icload backup isn't done last 2 weeks

I can't use my IPAD 4 because its say Icload backup isn't done last 2 weeks

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

In Logic Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin.

How can I retrieve the temporary backup which is done just before ios 5 update?

How can I retrieve the temporary backup which is done just before ios 5 update? Because I set up wrongly as new iphone and want to retrive the backup before the ios 5 update. But I never sync to itune before. When I find the previous backups, I can find only one backup which is done after ios 5 update.

I've never faced this case myself, but from the documentation it would seem that the INSTEAD OF DELETE is also a FOR EACH ROW trigger. Therefore, you don't really have to worry about the actual "where" clause of the original "delete" operation: Oracle has it all parsed for you, so you just need to redirect, in turn, each view record being deleted to the appropriate table.
In extenso: for your
delete vt12 where m = 1;
=> the INSTEAD OF trigger fires once for all records in vt12 where m=1, and I would guess that you trigger code should look like:
begin
delete from t1 where m = :old.m and n = :old.n and o = :old.o;
delete from t2 where a = :old.m and b = :old.n and c = :old.o;
end;
It's a bit of overkill compared to the "where" clause of the original "delete" statement, but it should do the job...
BTW, if by any luck you do have some primary key on tables t1 and t2 (say: columns o and c respectively), then obviously you can make the thing simpler:
begin
delete from t1 where o = :old.o;
delete from t2 where c = :old.o;
end;
HTH - Didier

How can I restore my old history & bookmarks if I didn't run backup before re-installing a new clean OS? I've been using Firefox for 7 years as default, help me

Hello,
I believe that what I'm asking is simple & clear. Do you or do you not store user data backups on your servers? I've been using Firefox, as the default browser, for over 7 years. Naturally, I had to upgrade my
pc's & operating systems several times through this period. Every time I use a new device & of course a
new OS, I normally lose my old data (History & Bookmarks).
If you keep records or backups of old users' data, there will be no problem & I could restore all my old data
following your instructions. If not, which is probably the case, I'd like to suggest you consider developing or
at least put more stress on running backup before uninstalling & re-installing a new OS for the users to pay more attention to this issue.
That's all, thanks.
Regards,
Aly Hamed

hello aly, mozilla doesn't keep any of your history or bookmarks on its severs without your expressed consent (would be a horrible privacy policy otherwise) - there's the [[Use Sync to share your Firefox bookmarks, passwords and more with Firefox for mobile|firefox sync feature]] which will store parts of your private data encrypted in the cloud, in case you've used that in the past you'd need 3 components to restore this data: your username, password & the recovery key...
otherwise i don't know of any way to get to your old data if you haven't kept any other backup of some sorts - unfortunately most of us are reminded to the importance of backups when it's already too late :-/
in regard to your suggestion: during the firefox uninstall procedure your personal data isn't removed per default, so it would still be there after a reinstall of the application - you'd have to explicitly check the option to clear this kind of data in the uninstaller. some general information on where to look if you want to backup your firefox data in the future is available here: [[Back up and restore information in Firefox profiles]]

My Iphone keeps coming out of recovery mode before Im done

anyone know how to make your iphone stay in recovery mode till its done restoring

Hi eli238,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
I hope this information helps ....
Happy Holidays!
- Judy

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

Is it necessary to do a backup before installing the new ios7 and then do a restore? We have 4th

I am not sure if I need to do a backup before installing the new upgrade of iOS7 and then do restore all files. I have heard of someone losing all their contacts! Any ideas please?

I would back up anything you don't want to lose. Chances are, you wont' lose a thing.....but backups are always nice to have.

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

Stopping a Vault backup before its done??

Similar Messages

Maybe you are looking for