Stopping Adapters?

Hello, it is possible to stop the whole adapter engine with all adapters inclusive?
Where can I stop the JDBC-Adapter? Is there a possibility in the SAP XI (perhaps in the Runtime Workbench)? Or is it only possible to stop the services in visual administrator?
Regards,
Alexander

The steps to enable your GTX 660 ti are very simple - find and delete (or rename) the file cuda_supported_cards.txt file. Then, the Mercury Playback Engine (MPE) will allow he benefits of your hardware. The benefits for hardware (GPU) assisted MPE is significant for CS5, CS5.5, and CS6. And most likely, it will help for CS??? whenever that comes out as well.
Regards,
Jim

Similar Messages

My ipad 3 stopped charging, not the adapter and reboot doesn't do anything. I've tried all the tricks and different adapters and now my nearest Apple store is saying it just doesn't work and it'll be $300 to replace. Only had it 1 yr and half.

My ipad 3 suddenly stopped charging last week. I've tried different adapters, to no avail. I didn't drop it or spill anything on it. I don't have tons of apps, so plenty of memory. My husband took it to the Apple store for me and they tried charging it too even though I knew that wasn't the problem and then said it wasn't working (no kidding) and then told him it would be $300 to replace. Seeing as I've only had it for a year and a half and it cost more than twice that to begin with, I'm a little ticked that it stops charging, a problem I know is very common according the all the message boards and they want to charge me $300. I've always heard that Apple was so good to it's customers, but my iphone has been a nightmare, and now my ipad won't charge. Also, I've tried the reset options I've read about and none worked. Sorry, just really upset. I thought I was paying all this money for better quality and now I feel foolish for having done so. Anybody with any ideas I, or the genius at Apple haven't thought of? Help is appreciated. Thanks.

May be some help on one of these links.
Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Using opmn to start/stop hub repo and adapters

Also posted as a thread on the OracleAS General forum, I'm hoping the duplication will cover both areas of expertise. Apologies if I offend.
"Configuring custom process with OracleAS 10g Release 2 (10.1.2) "
A Metalink note kindly informed me that I could use OPMN to start and stop Interconnect hub and adapter processes. The hyperlink sent me to the OPMN documentation and that's where the fun started!
So far I have only tried to add the repository as an ias-component and this is how the section of the opmn.xml file looks.
<ias-component id="HUBDEV3" status="enabled" id-matching="true">
<process-type id="HUBDEV3-repository" module-id="CUSTOM">
<environment>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdbc/lib/classes12.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jlib/oraclepki.jar" append="true"/>
<variable id="CLASSPATH" value="/du01/OAI/oracleas1/jlib/ojpse.jar" append="true"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="repo" numprocs="1">
<module-data>
<category id="start-parameters">
<data id="java-parameters" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m oracle.aob.repository.Repomain"/>
<data id="jar-file" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
</category>
<category id="stop-parameters">
<data id="java-parameters" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m oracle.aob.repository.Repomain -shutdown"/>
<data id="jar-file" value="/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
</ias-component>
This parses okay and when I call opmnctl status I get the following:
$ opmnctl status
Processes in Instance: hubASDEV3.xxxxxxxxxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 27533 | Alive
dcm-daemon | dcm-daemon | 217 | Alive
OC4J | home | 27534 | Alive
OC4J | jacada | 27535 | Alive
HUBDEV3 | HUBDEV3-repository | N/A | Down
I tried opmnctl startproc ias-component=HUBDEV3 & opmnctl startproc process-type=HUBDEV3-repository but both retun the following message:
opmn id=crm-drtest:6200
no enabled components for this request
Can anyone advice on where and why I'm going wrong?
Sometimes you wish you'd never seen the hint in the first place!!

Well, I now have a working solution.
The section from the opmn.xml file now reads (the major changes in bold):
<ias-component id="HUBDEV3" status="enabled" id-matching="true">
<process-type id="HUBDEV3-repo" module-id="CUSTOM" working-dir="/du01/OAI/oracleas1/integration/interconnect/repository">
<environment>
<variable id="JAVA_HOME" value=""/>
<variable id="THREADS_FLAG" value="native"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="repo" numprocs="1">
<module-data>
<category id="start-parameters">
<data id="start-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="start-args" value="-server -Drepo=InterConnectRepository -DORBdisableLocator=true -mx512m -ms8m -classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar oracle.aob.repository.Repomain"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="stop-args" value="-classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar oracle.aob.repository.Repomain -shutdown"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
<process-type id="HUBDEV3-adapters" module-id="CUSTOM" working-dir="/du01/OAI/oracleas1/integration/interconnect/adapters/CRMAPPS">
<environment>
<variable id="JAVA_HOME" value=""/>
<variable id="THREADS_FLAG" value="native"/>
<variable id="PATH" value="/du01/OAI/oracleas1/jdk/jre/bin" append="true"/>
<variable id="LD_LIBRARY_PATH" value="/du01/OAI/oracleas1/lib32" append="true"/>
</environment>
<process-set id="crmapps" numprocs="1">
<environment>
<variable id="LANG" value="en_US"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="start-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="start-args" value="-server -Dadapter=CRMAPPS -DORBdisableLocator=true -ms8m -mx512m -classpath :/du01/OAI/oracleas1/integration/interconnect/lib/oai.jar:/du01/OAI/oracleas1/jdk/jre/lib/i18n.jar:/du01/OAI/oracleas1/jdbc/lib/classes12.jar:/du01/OAI/oracleas1/jdbc/lib/nls_charset12.jar:/du01/OAI/oracleas1/rdbms/jlib/aqapi.jar:/du01/OAI/oracleas1/rdbms/jlib/jmscommon.jar:/du01/OAI/oracleas1/lib/xmlparserv2.jar:/du01/OAI/oracleas1/jlib/oraclepki.jar:/du01/OAI/oracleas1/jlib/ojpse.jar:/du01/OAI/oracleas1/jdk/jre/lib/ext/mail.jar:/du01/OAI/oracleas1/jdk/jre/lib/ext/activation.jar:/du01/OAI/oracleas1/integration/interconnect/lib/UserDefinedTransforms.jar: oracle.oai.agent.service.AgentService"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="/du01/OAI/oracleas1/jdk/jre/bin/java"/>
<data id="stop-args" value="-mx64m -classpath /du01/OAI/oracleas1/integration/interconnect/lib/oai.jar oracle.oai.agent.proxy.ShutdownAgent persistence/Agent.ior"/>
</category>
</module-data>
<start timeout="600"/>
<stop timeout="120"/>
</process-set>
</process-type>
</ias-component>
Once I added the working-dir attribute to the process-type tag, things began to fall into place. working-dir is set to the directory location of the repository start script and I repeated the same for the crmapps adapter. My biggest clue came when I added the crmapps adapter to the opmn.xml and when I tried to start it, the log file indicated that it couldn't find the adapter.ini file. The rest came naturally after that breakthrough.
It needs a bit of rejigging but so far, results are good.
Message was edited by:
Devious Scully

HT4060 My iPad Mini and My iPhone 4s stopped charging when plugged into and outlet. On the same day and i've tried numerous adapters . It will charge when turned off only or plugged into a computer

My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port,
Anyone else have this problem?

Youngsavage6oo wrote:
I have had my iphone 4s for only a couple months and it was charging fine and I unplugged it and when it got low I plugged it back in and wouldnt charge so I tried plugging it into the computer and its chargeing but I dont know what to do I need help
Its charging, whats the issue then?

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

N460GTX Cyclone 768D5/OC blue artifacts and stopped responding

In the last month I have been having issues with my graphics card to the point that I can't play any game (at all, always stops responding), flash on websites cause video driver "stopped responding" error, vlc or media player videos cause stopped responding error, and any 3d screen saver preview in windows 7 causes artifacts and sometimes the stopped responding error. I can still do anything 2D fine but always haver little blue artifacts all over the screen. Current drivers are Nvidia 266.58, I have tried MSI drivers, Nvidia 260.* drivers and a set of older Nvidia drivers that supposedly didn't have the stopping issues but all had problems even after fully wiping the old drivers on every install.
Given the power issues I have seen in past threads I hooked up my Kill-a-watt again (I always baseline my systems on burn in with that), and I am finding my Wattage draw hasn't changed. Kill A Watt measures 188W avg Draw, Peak 250W. All drives set on RAID to spin up sequentially so I don't get the max draw you'd expect. I ran this with superPi, prime95 and memtest and all run fine with max draw I saw at 250W. I tried to run 3d benchmark tests but like all 3d apps they all crash after video card not responding error. When building this I carefully specd out the power supply with conservative numbers and multiple online calculators, this PS should be able to handle adding 2 more 1TB drives as long as I don't do SLI (don't have room in case anyway with RAID controller).
I have tried all I can think of to resolve this but nothing helps and I'm thinking it's got to be an issue with the card since nothing in my config has changed. Is it the card for sure and will need RMA?
Here are my specs:
Asus P6T WS Pro Mobo
Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W
MSI N460GTX Cyclone 768D5/OC GeForce GTX 460 (Fermi) 768MB
6 GB DDR3 Kingston PC3-10700 8-8-8-24 timing
Kingston SSDNow V Series 64GB
Areca ARC-1120 RAID controller (configured RAID6)
4x Hitachi Deskstar HD31000 1TB 7200 RPM SATA
2x Samsung 1TB 7200 SATA
LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30
Power:
XFX Black Edition P1-750B-CAG9 750W ATX12V v2.2 / ESP12V v2.91 SLI Ready CrossFire Ready 80 PLUS SILVER
Single +12V rail, +3.3V@24A, +5V@30A, +12V@62A, [email protected], [email protected]
From XFX site regarding this PS:
Tight voltage regulation (±3%)
Single, high power +12V rail (up to 62A/744W)
DC to DC voltage Regulator modules for +3.3V and +5V
High quality Japanese brand capacitors (105°C)
Solid polymer caps provide enhanced reliability and stability
Quiet 135mm ball bearing fan provides superior cooling
Supports multiple high-end graphic adapters (NVIDIA SLI & ATI CrossFire Ready)
Detachable modular cables
Energy Star 4.0 and RoHS compliant

Can you test the card in another system, yours or a friends?

Mini-DVI has simply stopped working. Any ideas?

I had been appily using the mini-DVI port to play content on TV, using the DVI to Video adapter : plugging and unplugging probably twice a week.
Now it seems to have stopped: no signal at all is reaching the TV. Tears everywhere. (Adapter still works fine on my MacBook.)What are the chances of wear and tear damaging the DVI port? Is this a complicated fix? Any other thoughts? No recent upgrades or updates. "About this Mac" reckons it's mirroring fine, so it feels like a hardware thing. Many thanks in advance.

hey there rising tide,
does your Mac have ADC + DVI ports on rear or 2 DVI ports, if your Mac is a G5 towe? if so you'll need to get the appropriate adapters--either ADC> DVI or VGA + DVI or VGA cable & DVI > DVI or VGA cable, depending on the inputs on your LG monitors & what you may want to use. connect both displays, turn on. one should appear as main display(menu bar & dock). go to System Prefs>Displays>Detect Displays>Gather Windows. set rez on 2nd display, turn Mirror Off if you don't want/need it.
if your Mac is an iMac G5 same applies as to how, but you'll need to use a MiniVGA>VGA adapter to connect your 2nd display.
good luck.

Brand new mac mini and Studio Display 17" LCD- 2 adapters needed- problems?

From many forum posts here and elsewhere it seems I can in fact hook up my Studio Display 17" LCD monitor if I used the ADC-DVI adapter. But has anyone used the ADC-DVI adapter AND the DVI-mini DVI adapter that came in the box with the Mac mini?
Apple tech support told me on the phone tonight that doing so would "fry" the Studio Display.
Has anyone had any problems using this? Will running it through 2 adapters cause problems as opposed to the older minis where you could just do ADC-DVI and then into the computer?

Were you able to get your display working? I have an LG 27" at home connected to a Mid 2012 (June) MacBook Air 13" that has absolutely no issues. However, I just obtained the same Samsung monitor you have and appear to be having the same issue.
The only solution that I have found is to unplug the power from the back of the monitor or at the power supply each time my computer either wakes from sleep, screensaver, or a display that is powered off. This seems to be true via the following connections:
1. HDMI to DVI thunderbolt adapter
2. HDMI to Thunderbolt adapter
The display powers on with a slight flicker and then will immediately stop displaying the image on screen. What's especially strange here is the MacBook Air still believes the display is connected -- my login screen or active apps that are displayed on the external monitor do not move to the MacBook Air display as if it's no longer connected.
I hope someone has a solution to this issue! Thanks!

Satellite L770 - ethernet adapter has stopped working

HI
I have three laptops all connectable to my home hub, but I seem to be having serious problems with the latest model, the L770-13D. The signal strength has never been as good as the older models and just recently the Ethernet adapter has stopped working. I've updated drivers on both adapters but it hasn't made any difference. I've just recently upgraded my connection and I'm wondering whether the Ethernet adapter is not correctly configured since it was working alright prior to the upgrade.
I've also tried just about every test that I can do - The Toshiba config doctor returned a FAIL on the hardware check I did, but the device manager reports that both network adapters are working OK. Also, the troubleshooting of the wireless adapter reports that there 'may be a problem' The evidence seems to be pointing towards a hardware problem with this laptop.
Any thoughts?

HI Dr Lamp,
No I haven't tried that probably because I wouldn't know how to do it. I have a full recovery image on the data drive but I'm not comfortable with making any changes to the OS in case I mess things up. I've also got a recovery flash drive. Really, I'm out of my depth when it comes to making these sort of changes - I just thought that there may be something very simple that I'd overlooked. The machine is still under warranty, so I'll probably take it to a local computer specialist for diagnosis before involving Toshiba. If it's more than a software problem, they should earn their fees by repairing it. If you involve them and it isn't a hardware problem, they will bill you for about 80 plus carriage, so I'm naturally reluctant to do that. Also, you have to hang about waiting for delivery and collection. It may better to buy a USB/LAN adapter for about 20. Thanks for reply, anyhow.

Whenever I open a file in Photoshop it says "Adobe Photoshop CS6 has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." and it CRASHES a solution will be real

I tried re installing it but it crashes again I use CS6 version , but I have no Idea What causes it

First use CS6 menu Help>About Photoshop to check your version. The Latest perpetual versions are Mac version 13.0.6, Windows version 13.0.1.3 and the subscription version is 13.1.2. If you do no see one of these versions you need to use menu Help>Updates. If that does not update you to one of those version you may need to re-install CS6 on top of of your current install and use menu Help>Updates. CS6 is the buggiest version of Photoshop ever releases. You need the updates without the updates CS6 is very unstable.
If your CS6 is up to date use your Windows Acclivity Center Reliability History to locate your CS6 critical stopped working events and look at their details to see where CS6 is crashing. This may shed some light on your problem. CS6 use you Display adapters GPU for some features. If you have more then one GPU or you don't have the latest displaye adapter system device driver from its manufacturer installed CS6 may crash.
The following Shows Problems I have with Photoshop CC. The module IMSLib.dll will crash if I try to use Behance or Adobe exchange. It may have something to to with Flash panels which was removed in CC 2014. For Behance works in CC 2014 and Adobe exchange was removed in CC 2014. View in new browser tab or window for this site scale images poorly. In a tab or window you can scale image to their actual size,

Power adapters and worldwide compatibility - a lesson

The standard fare today in power adapters is such that the brick itself is compatible around the world. Indeed, the input power on a Lenovo AC adapter is rated from 100-240V and 50 or 60Hz - capable of operating on any power standard. The only catch is of course the wall plug in various countries. Again, most adapters have a removable adapter-to-wall power cord and if the manufacturer has a worldwide presence, you can likely order a country-specific power cord. Lenovo is such a company and you can find power cords for most geographies, like here. I'm preparing for a trip to New Zealand, my first out of the country, and wanted to be prepared to have my lifeline (aka ThinkPad) ready for the new locale. I looked up the power cord FRU (Field Replaceable Unit) number, called up IBM parts to verify availability, and placed the order. I was also delivering a new T61 to my mother-in-law and the U.S. power cord would be a burden down there. At $2.80 each plus a flat shipping fee, it was a no-brainer.
Australia/NZ Cord
As a side note, I ordered the adapters Monday night and they arrived Tuesday morning
I open the box to find a goofy-looking wall-plug (no offense... ) and what's this - a three-prong adapter-plug???
Australia/NZ plug
It looks a heckuva lot like the old T4x 16V power adapters and I figured I got the wrong FRU, dangit! After having gloated to Matt Kohut, our resident globetrotter, about my adapter-ordering-savvy, I mentioned in passing my situation. No sooner did my lips stop flapping did Matt whisk me away to a seemingly endless drawer in his desk, filled with dozens of black rectangles. Out of it came a seemingly normal looking 65W adapter.
Two very similar power adapters
Do you see a difference in the two adapters? I didn't at first either. Ah, there it is -
U.S. adapter vs ANZ adapter
It turns out that some countries still require an extra grounding wire in AC adapters and do the three-prong plug must be used. There I was thinking in my smugness that I could get away with a new power cord alone, not so!
I hope this helps anyone shopping for power adapters or cords soon. Thanks to Mr. Kohut I have a couple power adapters perfect for my mother-in-law's new T61, so she can compute around New Zealand without needing a silly plug adapter like us Yankees will use down there.
For reference, here are the part numbers in question:
2-prong 65W AC adapter: 92P1214
3-prong 65W AC adapter: 92P1153
Australia, New Zealand, Fiji, Papua, New Guinea power cord - 39M4960
65W AC adapter service parts page
Message Edited by Tim_Lenovo on 12-05-2007 12:50 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

They are different because the two notebooks use a different power system. Your R51 uses the old 16V adapters and the T60 uses the newer 20V versions. Starting with the Z60 series, it was decided to upgrade our power delivery capabilities to meet the ever-increasing power demands of mobile computing.
You can read more information in a couple of our blog posts on the topic:
http://lenovoblogs.com/insidethebox/?p=51
http://lenovoblogs.com/designmatters/?p=23
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

Troubleshooting MagSafe adapters http://support.apple.com/kb/ts1713
If you need to pursue further you can do it on-line, start here
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

Sender JDBC channel stop send messages

Hi,
We have a sender JDBC scenario which is working correctly time ago.
However, sometimes this channel stop sending messages although the Adapter Monitor shows that they regularly execute the polling interval.
We have confirmed that there isn't any connection from XI to target BD.
In other ocasions, we are required to restart XI and, after that, this scenario works without any problem.
What could be the cause?
How to solve it?
thanks, in advance
Carme

This is rather strange.
A few of my observations -
1. When the sender jdbc adapter polls , and there is no data matching the select query, you will still see a message id in Comm Channel Monitoring but with no hyper link.
2. The actual message id / message is created only if there is data in the database and also the hyper link is enabled.
3. If you are confident that the data is being commited on the database and that it is XI not pulling the right data, one issue might be - driver issues. Can you check if you have the right compatible drivers for your database on XI server - is there a new'er driver available?
We hit a similar issue with JMS adapters and we learnt that the JMS server had been updated as a result of which a new driver had to be installed which we did not until we hit intermittent problems like these.
Hope this helps
Regards
Bhavesh

Photoshop crashing with 2 different display adapters

I am having trouble with Photoshop CC.
My laptop is a Sony Vaio Z Series model SVZ131190X. The internal display adapter is an Intel HD Graphics 4000, this is the Driver Node Strong Name from the device properties:
oem6.inf:ATI.Mfg.NTamd64.6.1:iIVBM1ML_PROXY:8.961.1.0:pci\ven_8086&dev_0166&subsys_90a5104 d
This display adapter drives 1 of my external displays (it also drives the laptop's display).
The Vaio has a docking station which has a second display adapter, an AMD Radeon HD 7670M. This is the Driver Node Strong Name from the device properties:
oem6.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_Vancouver_PXAI:8.961.1.0:pci\ven_1002&dev_6740&subsy s_90a5104d
With both display adapters active Photoshop displays the splash screen, begins initialization, and then stops working. Windows asks if I want to debug it and the app closes. I can disable the monitors from either display adapter and Photoshop starts fine. Once Photoshop is running I can re-enable the monitors I disabled and it continues to work, I can move Photoshop from one screen to another and back again with no issue. My current setup is using both monitor outputs on the docking station, the VGA port is plugged into a Samsung 191t, the HDMI port is plugged into a ViewSonic VA2246M-LED (with an HDMI to DVI cable). The internal laptop monitor is not active (the lid is closed) and attached to the VGA port on the side of it is another ViewSonic VA2246M-LED.
The OS is Windows 7 Home Premium, SP1. It is the Sony OEM install of Windows aside from updates that have been installed since I bought it (xmas of 2012).
This is the Driver Node Strong Name for the Docking Station:
machine.inf:GENDEV_SYS.NTamd64:NO_DRV:6.1.7601.17514:*pnp0c15
Here is the system info from Photoshop when it is running (started with the monitor on the Intel HD adapter disconnected). When the 3rd monitor is activated after starting Photoshop the System Info dialog sees that monitor as Display 3 (the system info once the 3rd monitor is activated is pasted below this):
---------- cut here ----------
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2095 MHz
Built-in memory: 8089 MB
Free memory: 3250 MB
Memory available to Photoshop: 7070 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1024, right=1280
Display: 2
Display Bounds: top=0, left=-1920, bottom=1080, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=1024
glgpu[0].GLName="AMD Radeon(TM) HD 7670M"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="8.961.1.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon(TM) HD 7670M"
glgpu[0].GLRendererID=26432
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiu md64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm 64.dll"
glgpu[0].GLDriverDate="20120414000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.20"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[214 7483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 AMD-APP (923.1)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (923.1)"
clgpu[0].CLMemoryMB=1024
clgpu[0].CLName="Turks"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="CAL 1.4.1720 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.40035e+010
clgpu[0].CLCompute=64.0338
License Type: Subscription
Serial number: 90970563373633166479
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\jreid\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
    Startup, 209.6G, 99.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
     A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
     ACE.dll   ACE 2014/04/14-23:42:44   79.554120   79.554120
     adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
     AdbePM.dll   PatchMatch 2014/04/23-10:46:55   79.554276   79.554276
     AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
     AdobeOwl.dll   Adobe Owl 2014/03/05-14:49:37   5.0.33   79.552883
     AdobePDFL.dll   PDFL 2014/03/04-00:39:42   79.510482   79.510482
     AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
     AdobeXMP.dll   Adobe XMP Core 2014/01/13-19:44:00   79.155772   79.155772
     AdobeXMPFiles.dll   Adobe XMP Files 2014/01/13-19:44:00   79.155772   79.155772
     AdobeXMPScript.dll   Adobe XMP Script 2014/01/13-19:44:00   79.155772   79.155772
     adobe_caps.dll   Adobe CAPS   8,0,0,13
     AGM.dll   AGM 2014/04/14-23:42:44   79.554120   79.554120
     ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
     amtlib.dll   AMTLib (64 Bit)   8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7)   1.000000
     ARE.dll   ARE 2014/04/14-23:42:44   79.554120   79.554120
     AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
     AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
     Bib.dll   BIB 2014/04/14-23:42:44   79.554120   79.554120
     BIBUtils.dll   BIBUtils 2014/04/14-23:42:44   79.554120   79.554120
     boost_date_time.dll   photoshopdva   8.0.0
     boost_signals.dll   photoshopdva   8.0.0
     boost_system.dll   photoshopdva   8.0.0
     boost_threads.dll   photoshopdva   8.0.0
     cg.dll   NVIDIA Cg Runtime   3.0.00007
     cgGL.dll   NVIDIA Cg Runtime   3.0.00007
     CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
     CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
     CoolType.dll   CoolType 2014/04/14-23:42:44   79.554120   79.554120
     dvaaudiodevice.dll   photoshopdva   8.0.0
     dvacore.dll   photoshopdva   8.0.0
     dvamarshal.dll   photoshopdva   8.0.0
     dvamediatypes.dll   photoshopdva   8.0.0
     dvametadata.dll   photoshopdva   8.0.0
     dvametadataapi.dll   photoshopdva   8.0.0
     dvametadataui.dll   photoshopdva   8.0.0
     dvaplayer.dll   photoshopdva   8.0.0
     dvatransport.dll   photoshopdva   8.0.0
     dvaui.dll   photoshopdva   8.0.0
     dvaunittesting.dll   photoshopdva   8.0.0
     dynamiclink.dll   photoshopdva   8.0.0
     ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
     icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
     icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
     igestep30.dll   IGES Reader   9.3.0.113
     imslib.dll   IMSLib DLL   7.0.0.145
     JP2KLib.dll   JP2KLib 2014/03/12-08:53:44   79.252744   79.252744
     libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
     libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
     libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
     LogSession.dll   LogSession   7.2.1.3399
     mediacoreif.dll   photoshopdva   8.0.0
     MPS.dll   MPS 2014/03/25-23:41:34   79.553444   79.553444
     pdfsettings.dll   Adobe PDFSettings   1.04
     Photoshop.dll   Adobe Photoshop CC 2014   15.1
     Plugin.dll   Adobe Photoshop CC 2014   15.1
     PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
     PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.0.0.74
     PSArt.dll   Adobe Photoshop CC 2014   15.1
     PSViews.dll   Adobe Photoshop CC 2014   15.1
     SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
     ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
     svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
     tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
     tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
     TfFontMgr.dll   FontMgr   9.3.0.113
     TfKernel.dll   Kernel   9.3.0.113
     TFKGEOM.dll   Kernel Geom   9.3.0.113
     TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
     updaternotifications.dll   Adobe Updater Notifications Library   8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   8.0.0.14
     VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
     VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
     WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
     wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
     3D Studio 15.1 (2014.1.0 x001)
     Accented Edges 15.1
     Adaptive Wide Angle 15.1
     Angled Strokes 15.1
     Average 15.1 (2014.1.0 x001)
     Bas Relief 15.1
     BMP 15.1
     Camera Raw 8.6
     Camera Raw Filter 8.6
     Chalk & Charcoal 15.1
     Charcoal 15.1
     Chrome 15.1
     Cineon 15.1 (2014.1.0 x001)
     Clouds 15.1 (2014.1.0 x001)
     Collada 15.1 (2014.1.0 x001)
     Color Halftone 15.1
     Colored Pencil 15.1
     CompuServe GIF 15.1
     Conté Crayon 15.1
     Craquelure 15.1
     Crop and Straighten Photos 15.1 (2014.1.0 x001)
     Crop and Straighten Photos Filter 15.1
     Crosshatch 15.1
     Crystallize 15.1
     Cutout 15.1
     Dark Strokes 15.1
     De-Interlace 15.1
     Dicom 15.1
     Difference Clouds 15.1 (2014.1.0 x001)
     Diffuse Glow 15.1
     Displace 15.1
     Dry Brush 15.1
     Eazel Acquire 15.1 (2014.1.0 x001)
     Embed Watermark 4.0
     Entropy 15.1 (2014.1.0 x001)
     Export Color Lookup NO VERSION
     Extrude 15.1
     FastCore Routines 15.1 (2014.1.0 x001)
     Fibers 15.1
     Film Grain 15.1
     Filter Gallery 15.1
     Flash 3D 15.1 (2014.1.0 x001)
     Fresco 15.1
     Glass 15.1
     Glowing Edges 15.1
     Google Earth 4 15.1 (2014.1.0 x001)
     Grain 15.1
     Graphic Pen 15.1
     Halftone Pattern 15.1
     HDRMergeUI 15.1
     IFF Format 15.1
     IGES 15.1 (2014.1.0 x001)
     Ink Outlines 15.1
     JPEG 2000 15.1
     Kurtosis 15.1 (2014.1.0 x001)
     Lens Blur 15.1
     Lens Correction 15.1
     Lens Flare 15.1
     Liquify 15.1
     Matlab Operation 15.1 (2014.1.0 x001)
     Maximum 15.1 (2014.1.0 x001)
     Mean 15.1 (2014.1.0 x001)
     Measurement Core 15.1 (2014.1.0 x001)
     Median 15.1 (2014.1.0 x001)
     Mezzotint 15.1
     Minimum 15.1 (2014.1.0 x001)
     MMXCore Routines 15.1 (2014.1.0 x001)
     Mosaic Tiles 15.1
     Multiprocessor Support 15.1 (2014.1.0 x001)
     Neon Glow 15.1
     Note Paper 15.1
     NTSC Colors 15.1 (2014.1.0 x001)
     Ocean Ripple 15.1
     OpenEXR 15.1
     Paint Daubs 15.1
     Palette Knife 15.1
     Patchwork 15.1
     Paths to Illustrator 15.1
     PCX 15.1 (2014.1.0 x001)
     Photocopy 15.1
     Photoshop 3D Engine 15.1 (2014.1.0 x001)
     Photoshop Touch 14.0
     Picture Package Filter 15.1 (2014.1.0 x001)
     Pinch 15.1
     Pixar 15.1 (2014.1.0 x001)
     Plaster 15.1
     Plastic Wrap 15.1
     PLY 15.1 (2014.1.0 x001)
     PNG 15.1
     Pointillize 15.1
     Polar Coordinates 15.1
     Portable Bit Map 15.1 (2014.1.0 x001)
     Poster Edges 15.1
     Radial Blur 15.1
     Radiance 15.1 (2014.1.0 x001)
     Range 15.1 (2014.1.0 x001)
     Read Watermark 4.0
     Render Color Lookup Grid NO VERSION
     Reticulation 15.1
     Ripple 15.1
     Rough Pastels 15.1
     Save for Web 15.1
     ScriptingSupport 15.1
     Shake Reduction 15.1
     Shear 15.1
     Skewness 15.1 (2014.1.0 x001)
     Smart Blur 15.1
     Smudge Stick 15.1
     Solarize 15.1 (2014.1.0 x001)
     Spatter 15.1
     Spherize 15.1
     Sponge 15.1
     Sprayed Strokes 15.1
     Stained Glass 15.1
     Stamp 15.1
     Standard Deviation 15.1 (2014.1.0 x001)
     STL 15.1 (2014.1.0 x001)
     Sumi-e 15.1
     Summation 15.1 (2014.1.0 x001)
     Targa 15.1
     Texturizer 15.1
     Tiles 15.1
     Torn Edges 15.1
     Twirl 15.1
     U3D 15.1 (2014.1.0 x001)
     Underpainting 15.1
     Vanishing Point 15.1
     Variance 15.1 (2014.1.0 x001)
     Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
     Water Paper 15.1
     Watercolor 15.1
     Wave 15.1
     Wavefront|OBJ 15.1 (2014.1.0 x001)
     WIA Support 15.1 (2014.1.0 x001)
     Wind 15.1
     Wireless Bitmap 15.1 (2014.1.0 x001)
     ZigZag 15.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE
---------- cut here ----------
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2095 MHz
Built-in memory: 8089 MB
Free memory: 2949 MB
Memory available to Photoshop: 7070 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1024, right=1280
Display: 2
Display Bounds: top=0, left=-1920, bottom=1080, right=0
Display: 3
Display Bounds: top=0, left=1280, bottom=1080, right=3200
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=1024
glgpu[0].GLName="AMD Radeon(TM) HD 7670M"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="8.961.1.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon(TM) HD 7670M"
glgpu[0].GLRendererID=26432
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiu md64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm 64.dll"
glgpu[0].GLDriverDate="20120414000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.20"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[214 7483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 AMD-APP (923.1)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (923.1)"
clgpu[0].CLMemoryMB=1024
clgpu[0].CLName="Turks"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="CAL 1.4.1720 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.40035e+010
clgpu[0].CLCompute=64.0338
License Type: Subscription
Serial number: 90970563373633166479
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\jreid\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
    Startup, 209.6G, 99.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
     A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
     ACE.dll   ACE 2014/04/14-23:42:44   79.554120   79.554120
     adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
     AdbePM.dll   PatchMatch 2014/04/23-10:46:55   79.554276   79.554276
     AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
     AdobeOwl.dll   Adobe Owl 2014/03/05-14:49:37   5.0.33   79.552883
     AdobePDFL.dll   PDFL 2014/03/04-00:39:42   79.510482   79.510482
     AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
     AdobeXMP.dll   Adobe XMP Core 2014/01/13-19:44:00   79.155772   79.155772
     AdobeXMPFiles.dll   Adobe XMP Files 2014/01/13-19:44:00   79.155772   79.155772
     AdobeXMPScript.dll   Adobe XMP Script 2014/01/13-19:44:00   79.155772   79.155772
     adobe_caps.dll   Adobe CAPS   8,0,0,13
     AGM.dll   AGM 2014/04/14-23:42:44   79.554120   79.554120
     ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
     amtlib.dll   AMTLib (64 Bit)   8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7)   1.000000
     ARE.dll   ARE 2014/04/14-23:42:44   79.554120   79.554120
     AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
     AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
     Bib.dll   BIB 2014/04/14-23:42:44   79.554120   79.554120
     BIBUtils.dll   BIBUtils 2014/04/14-23:42:44   79.554120   79.554120
     boost_date_time.dll   photoshopdva   8.0.0
     boost_signals.dll   photoshopdva   8.0.0
     boost_system.dll   photoshopdva   8.0.0
     boost_threads.dll   photoshopdva   8.0.0
     cg.dll   NVIDIA Cg Runtime   3.0.00007
     cgGL.dll   NVIDIA Cg Runtime   3.0.00007
     CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
     CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
     CoolType.dll   CoolType 2014/04/14-23:42:44   79.554120   79.554120
     dvaaudiodevice.dll   photoshopdva   8.0.0
     dvacore.dll   photoshopdva   8.0.0
     dvamarshal.dll   photoshopdva   8.0.0
     dvamediatypes.dll   photoshopdva   8.0.0
     dvametadata.dll   photoshopdva   8.0.0
     dvametadataapi.dll   photoshopdva   8.0.0
     dvametadataui.dll   photoshopdva   8.0.0
     dvaplayer.dll   photoshopdva   8.0.0
     dvatransport.dll   photoshopdva   8.0.0
     dvaui.dll   photoshopdva   8.0.0
     dvaunittesting.dll   photoshopdva   8.0.0
     dynamiclink.dll   photoshopdva   8.0.0
     ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
     icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
     icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
     igestep30.dll   IGES Reader   9.3.0.113
     imslib.dll   IMSLib DLL   7.0.0.145
     JP2KLib.dll   JP2KLib 2014/03/12-08:53:44   79.252744   79.252744
     libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
     libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
     libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
     LogSession.dll   LogSession   7.2.1.3399
     mediacoreif.dll   photoshopdva   8.0.0
     MPS.dll   MPS 2014/03/25-23:41:34   79.553444   79.553444
     pdfsettings.dll   Adobe PDFSettings   1.04
     Photoshop.dll   Adobe Photoshop CC 2014   15.1
     Plugin.dll   Adobe Photoshop CC 2014   15.1
     PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
     PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.0.0.74
     PSArt.dll   Adobe Photoshop CC 2014   15.1
     PSViews.dll   Adobe Photoshop CC 2014   15.1
     SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
     ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
     svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
     tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
     tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
     TfFontMgr.dll   FontMgr   9.3.0.113
     TfKernel.dll   Kernel   9.3.0.113
     TFKGEOM.dll   Kernel Geom   9.3.0.113
     TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
     updaternotifications.dll   Adobe Updater Notifications Library   8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   8.0.0.14
     VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
     VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
     WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
     wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
     3D Studio 15.1 (2014.1.0 x001)
     Accented Edges 15.1
     Adaptive Wide Angle 15.1
     Angled Strokes 15.1
     Average 15.1 (2014.1.0 x001)
     Bas Relief 15.1
     BMP 15.1
     Camera Raw 8.6
     Camera Raw Filter 8.6
     Chalk & Charcoal 15.1
     Charcoal 15.1
     Chrome 15.1
     Cineon 15.1 (2014.1.0 x001)
     Clouds 15.1 (2014.1.0 x001)
     Collada 15.1 (2014.1.0 x001)
     Color Halftone 15.1
     Colored Pencil 15.1
     CompuServe GIF 15.1
     Conté Crayon 15.1
     Craquelure 15.1
     Crop and Straighten Photos 15.1 (2014.1.0 x001)
     Crop and Straighten Photos Filter 15.1
     Crosshatch 15.1
     Crystallize 15.1
     Cutout 15.1
     Dark Strokes 15.1
     De-Interlace 15.1
     Dicom 15.1
     Difference Clouds 15.1 (2014.1.0 x001)
     Diffuse Glow 15.1
     Displace 15.1
     Dry Brush 15.1
     Eazel Acquire 15.1 (2014.1.0 x001)
     Embed Watermark 4.0
     Entropy 15.1 (2014.1.0 x001)
     Export Color Lookup NO VERSION
     Extrude 15.1
     FastCore Routines 15.1 (2014.1.0 x001)
     Fibers 15.1
     Film Grain 15.1
     Filter Gallery 15.1
     Flash 3D 15.1 (2014.1.0 x001)
     Fresco 15.1
     Glass 15.1
     Glowing Edges 15.1
     Google Earth 4 15.1 (2014.1.0 x001)
     Grain 15.1
     Graphic Pen 15.1
     Halftone Pattern 15.1
     HDRMergeUI 15.1
     IFF Format 15.1
     IGES 15.1 (2014.1.0 x001)
     Ink Outlines 15.1
     JPEG 2000 15.1
     Kurtosis 15.1 (2014.1.0 x001)
     Lens Blur 15.1
     Lens Correction 15.1
     Lens Flare 15.1
     Liquify 15.1
     Matlab Operation 15.1 (2014.1.0 x001)
     Maximum 15.1 (2014.1.0 x001)
     Mean 15.1 (2014.1.0 x001)
     Measurement Core 15.1 (2014.1.0 x001)
     Median 15.1 (2014.1.0 x001)
     Mezzotint 15.1
     Minimum 15.1 (2014.1.0 x001)
     MMXCore Routines 15.1 (2014.1.0 x001)
     Mosaic Tiles 15.1
     Multiprocessor Support 15.1 (2014.1.0 x001)
     Neon Glow 15.1
     Note Paper 15.1
     NTSC Colors 15.1 (2014.1.0 x001)
     Ocean Ripple 15.1
     OpenEXR 15.1
     Paint Daubs 15.1
     Palette Knife 15.1
     Patchwork 15.1
     Paths to Illustrator 15.1
     PCX 15.1 (2014.1.0 x001)
     Photocopy 15.1
     Photoshop 3D Engine 15.1 (2014.1.0 x001)
     Photoshop Touch 14.0
     Picture Package Filter 15.1 (2014.1.0 x001)
     Pinch 15.1
     Pixar 15.1 (2014.1.0 x001)
     Plaster 15.1
     Plastic Wrap 15.1
     PLY 15.1 (2014.1.0 x001)
     PNG 15.1
     Pointillize 15.1
     Polar Coordinates 15.1
     Portable Bit Map 15.1 (2014.1.0 x001)
     Poster Edges 15.1
     Radial Blur 15.1
     Radiance 15.1 (2014.1.0 x001)
     Range 15.1 (2014.1.0 x001)
     Read Watermark 4.0
     Render Color Lookup Grid NO VERSION
     Reticulation 15.1
     Ripple 15.1
     Rough Pastels 15.1
     Save for Web 15.1
     ScriptingSupport 15.1
     Shake Reduction 15.1
     Shear 15.1
     Skewness 15.1 (2014.1.0 x001)
     Smart Blur 15.1
     Smudge Stick 15.1
     Solarize 15.1 (2014.1.0 x001)
     Spatter 15.1
     Spherize 15.1
     Sponge 15.1
     Sprayed Strokes 15.1
     Stained Glass 15.1
     Stamp 15.1
     Standard Deviation 15.1 (2014.1.0 x001)
     STL 15.1 (2014.1.0 x001)
     Sumi-e 15.1
     Summation 15.1 (2014.1.0 x001)
     Targa 15.1
     Texturizer 15.1
     Tiles 15.1
     Torn Edges 15.1
     Twirl 15.1
     U3D 15.1 (2014.1.0 x001)
     Underpainting 15.1
     Vanishing Point 15.1
     Variance 15.1 (2014.1.0 x001)
     Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
     Water Paper 15.1
     Watercolor 15.1
     Wave 15.1
     Wavefront|OBJ 15.1 (2014.1.0 x001)
     WIA Support 15.1 (2014.1.0 x001)
     Wind 15.1
     Wireless Bitmap 15.1 (2014.1.0 x001)
     ZigZag 15.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE
---------- cut here ----------

Your video card drivers are crashing because they are over 2 years old, and buggy.
Go to the GPU maker's website and update the drivers.

Stopping Adapters?

Similar Messages

Maybe you are looking for