Stopping Background job in Risk Analysis and Remediation

Hi,
We have scheduled background job for Batch Risk Analysis in CC 5.3. Later we have terminated that job for some reasons. But that terminated job status is showing as Stopping from past 3 days. How we can cancel that job?
We have restated the J2E server but the job is still running. Please suggest me how we can stop that job immediately.
Regards,
KKRao.
Edited by: KKRao_2020 on May 12, 2009 9:14 AM

Hi,
If you have access to oracle backend then I can tell an work arround for this issue,
when the job is in stoping status then you can delete an entry from VIRSA_CC_JOBHST table.
The command is
SQL> delete from VIRSA_CC_JOBHST where jobid=your jobid and status=3;
After running this command the job in the RAR will show aborted status then the delete button will be enabled and if you want then you can delete that job from RAR screen.
Regards,
Sudip.

Similar Messages

Convert from Compliance Calibrator 4.0 to Risk Analysis and Remediation 5.2

Hello Forum,
I'm looking for other opinions on converting Compliance Calibrator (CC) 4.0 to Risk Analysis and Remediation (RAR) 5.2 (formerly CC)
I have inherited responsibility for RAR and need to upgrade it to the 5.2 level; our current ECC level prevents us from going to 5.3
I found a process that will unload the data from CC 4.0 and be imported into RAR 5.2
I want to understand the definitions that comprise the RAR and was thinking about recreating the definitions in 5.2 based on what is already defined in the CC 4.0 system; I have time to do this since there is no definitive deadline that would make it impossible to meet
Currently, I have the following definitions:
Business Process 6 entries
Functions 47 entries
Risks 147 entries
Mitigating Controls 40 entries
Would others find this approach acceptable and reasonable even though I would be entering all the information? Basically, it would be like defining the data for the very first time if this was NEW software
I would expect to come away with a good understanding of how everything ties together; at this point, I am only looking to create the necessary data that would allow for producing SOD reports that show all users with "risks" have been mitigated with acceptable controls
Thanks for your responses in advance
Jerry
Ryerson, Inc
630-758-2021

Thanks for the reply
I have the migration guide and have reviewed it; I have actually played around a bit with obtaining the file from CC 4.0; I found that the data records may need some adjustments to be compatible with RAR 5.2; one of the reasons that may be leading me to do everything from scratch
The definitions currently defined were completed by an outside source and the mitigated controls were defined by the Internal Audit area
I'm not sure if they were mixed with the defaults
I'm not sure at this point what impact or changes I would experience if I use the "default" supplied rules set but I expect to find out
Thanks again for your reply
Jerry

Need to exclude certain risks in Risk Analysis and Remediation (5.2)

Hello Experts,
My requirement is I need to exclude certain unwanted risks whenever I execute the simulation for a user or an SAP role. We had this provision in the ABAP version of compliance calibrator 4.0. But we are not able to do the same in the upgraded 5.2 risk analysis and remediation.
Can anyone please provide a solution to this problem or some workaround. Thanks in advance.
Best Regds,
Suyog Chakot...

Hi,
there are several options:
- you can disable single risks in rule architect.
- you can create a seond rule set that only checks the roles you want to check on
- you can mitigate certain roles or users to exclude them from analysis
The options are all there - depends on what exactly you want to do.
Frank.

Cannot find CCRTAWS at Access Control Risk Analysis and Remediation?

I am looking for the Web service CCRTAWS in Access Control Risk Analysis and Remediation.
But I cannot find it.
Could you help? Thanks a lot!

Ashley,
Go to main page of WAS (Web application server) where AC 5.3 is installed. It would be
http://(servername):(port)/index.html [Replace servername and port with the actual servername and port number]
Click on Web service navigator (First link on right side). This link will show you all the web services installed. Search for CCRTAWS. I can see it in my AC installation.
Regards,
Alpesh

Custom Tabs in Risk Analysis and Remediation

In the configuration Tab of the RAR, one has the ability to add 3 custom tabs. These custom tabs appear to the right of the Configuration Tab. The name which brings up the tab is appended at the end of the url as mentioned in the configuration guide. For example if you append "CCdebugger" the Debugger tab is appended.
Does anyone know what other tabs can be added and how does go about finding the names of the tabs that can be appended like the one example shown above? The configuration guide does not provide any list of tabs that can be attached in this way. (Granted the maximum at a time is 3).
Would appreciate your help and input on this.
Thanks

Hello Arun,
You can add in custom tabs any webservice (webservices urls can be found in UME Web Services Navigator) or any other link even external (as a webmail or a google search bar!).
You are free to configure your custom tabs according to your needs, but do keep in mind that custom tabs are common to all users!
For information here are 3 tabs we have chosen to configure:
debug mode : .../webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?debug=1
CC Background deamon : .../sap/CCBgStatus.jsp
Thread follow up : .../sap/CCADStatus.jsp
Hope this helps,
Kind regards,
Sophie Planchais
Edited by: Sophie Planchais on Sep 3, 2008 1:52 PM

Risk Analysis and Remediation Mitigating Control Monitoring Alerts

Hello,
We have configured an alert for a Mitigating Control. The Monitor must execute the report every day (report frequency = 1) or an alert email is sent to the Risk Owner.
The Risk Owner recieves the Alert email and the Alert is logged on the Alerts tab only for the first two days after the report is not executed by the Monitor. Is there a setting somewhere that controls why the alert is not generated after two days?
thanks
Tammi

Correction.
The email is only sent for 2 days. The alert is logged on the Alert Monitor tab every day.

SAP GRC AC: Organizational rules at Batch risks analysis and Dashboards

Dear All.
I would like to know GRC AC is able to consider the organizational rules defined (for example: risk only affected to Company, BUKRS 0001) at the Batch risks analysis and at the Dashboard. I already know that for the ad-hoc reporting you can filter by the Org.rules created but i would like to know if this filter is also able for the Batch risks analysis.
Thanks and regards.

Dear all.
As per my knowledge this parameter only sets the flag of Consider Org.Rules at the filters. This is what the guide indicates:
"Setting the value to YES automatically selects the Consider Org Rule checkbox on the Risk Violations tab of the Access Request and
Role Maintenance screens."
So how are you so sure about that indicating this flag to YES will take into consideration the org rules at the Dashboards?
Regards

Back ground job for Risk Analysis

Dear expert
we have schedule BG for risk analysis at role level for a DEV box and its been 7 days since it is in running state .
I have checked logs but no error .
Is this normal behaviour .I am confused because of DEV box which is having test roles also .
Also we are using logical system as well as physical system for ruleset .
Kindly share your experience .
Thanks & Regards
Ashesh

Hello All,
We are geeting below mentioned error -
WARNING: Job ID:235 : Failed to run Risk Analysis
java.io.IOException: No space left on device (errno:28)
     at java.io.FileOutputStream.writeBytes(Native Method)
     at java.io.FileOutputStream.write(FileOutputStream.java:260)
     at sun.nio.cs.StreamEncoder$CharsetSE.writeBytes(StreamEncoder.java:336)
     at sun.nio.cs.StreamEncoder$CharsetSE.implWrite(StreamEncoder.java:395)
     at sun.nio.cs.StreamEncoder.write(StreamEncoder.java:136)
     at java.io.OutputStreamWriter.write(OutputStreamWriter.java:191)
     at java.io.BufferedWriter.flushBuffer(BufferedWriter.java:111)
     at java.io.BufferedWriter.write(BufferedWriter.java:206)
     at java.io.Writer.write(Writer.java:126)
     at com.virsa.cc.xsys.riskanalysis.dao.dto.RAReportDTO.printToSpool(RAReportDTO.java:454)
     at com.virsa.cc.xApr 1, 2011 2:08:45 AM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
Thanks,
Jagat

How to stop background job to print papers

Hi all,
I have background job of forms running every day and its printing papers. My requirement is to stop the printing of papers in the background job.
How to do this .
i am using CALL FUNCTION 'GET_PRINT_PARAMETERS and    NEW-PAGE PRINT ON PARAMETERS v_params NO DIALOG.
    NEW-PAGE PRINT OFF.
Thanks
Krupali

Hi,
<li>Set the below before you call NEW-PAGE PRINT ON
lw_pripar-prrel = space.
lw_pripar-primm = space.
<li>Call NEW-PAGE PRINT ON like below
    NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
Thanks
Venkat.O

Table name for background job with report, variant and step user id list.

Hello All,
I need to generate the list of scheduled backgroung job with the list of Report Name, Variant, Step User Id called. Please any one tell the SAP Table name from which I can get these data.
Thanks in Advance,
Amit

Hi Rohit,
Thanks for your reply. But from TBTCO, i can't find program/report name and variant. Just the list of background job i can see.
Regards,
Amit

AC10 - Auto risk analysis and auto mitigation

Hi,
I was wondering if it is possible to
- run an automatic risk analysis at the end of an approval stage of the workflow, the same way it is possible to configure at the time of request sending?
- automatically put a mitigating control in the request for the risks found?
In our case, there is only one mitigating control for each risk and the assignment of the control is an unnecessary manual task to perform. The mitigation assignment will be approved in a seperate WF by the mitigation owner.
It seems there is no out of the box solution to this, so any alternative suggestions are welcome.
Thanks,
Daniela

Hi Daniela,
If I may give my opinion, I would probably break your question down into 2 parts.
1) Auto Risk analysis at the end of a stage - Making "Risk Analysis Mandatory" at that stage is probably the method. Unfortunately this does mean clicking one or two buttons (so not fully automated). Think AC uses this method to ensure the reviewer is aware of the conflicts caused etc.
2) Auto Mitigation - For a business access workflow in a 'Live' situation, this is probably not a good idea, as analysing and making the decision on whether to proceed with the request should really be performed by an actual person responsible for that stage in the work flow e.g. Role Owner or Security Lead etc. You would not want to mitigate all risks automatically (if I have understood correctly that you have a mitigation per risk ID). In theory, an automated mitigation process would mitigate all risks without discrimination.
On a side note, there is a configuration setting under SPRO for Access controls as follows
"Risk Analysis- Access Request : Param ID 1072 - Mitigation of critical risk required before approving the request". By enabling this configuration, you could force a mitigating control to be applied to any user requesting Critical Access.
Hope this helps.

Background job in Released status and does not run. What is the problem?

Hi Experts,
I ran a ABAP report as a background job. But when I see the job status in SM37 I found that it is "Released" but the job does not run further, It remains in "Released" state. I have given the correct variant and start condition "immediate" . Moreover there is no spool and log as well.
The ABAP report runs fine in forground. It used to run in background few days back.
What could be the problem? Kindly help!
Thanks
Gopal

Hi Bob,
But I checked after 2 days still the job status is in Released state. There were some other jobs that ran successfully. So atleast after two days I hope the job should have run. I can't even delete it. What shall I do?
Thanks
Gopal

Extract SAP Background Job list to excel and E-mail to User

Hi Experts,
I am a Basis consultant and have a requirement to download the list of finished & cancelled SAP BG jobs of previous week to excel and send e-mail to Users. For now we are doing this manually every week, Is this possible to automate this process? Please help to share your views.
Thank you very much in advance.
Regards,

Hi Mariano,
Thanks for your reply. Yes, I have already checked TBTC* tables but i want to know is there any standard report/program that can be scheduled on daily basis to download all the required data from SAP to excel?
Regards,

Job worker billing analysis and verification through stock transfer note

Dear All,
We give all the material to your job work location and then we get the material packed by our job worker and then we give our job worker packing charges as per the following:
1. Sulphuric Acid 5 L = Rs.10/- per unit
2. Nitric Acid 25L = Rs.50/- per unit.
Like this.
So tell me how should i maintain the job work charges against each FG for the job work, so that at the end of month i can download their monthly bill report through dispatches which they have made between that period.
Kindly also tell me the code which i should use to check their monthly job work bills through dispatch done through stock transfer note.
Regards,
Phalgun Patel

Hi Phalgun,
Mr. Muhammad is right. You have to use Subcontracting process for your requirement.
Just go through below link which gives you standard SAP Subcontracting process with configuration.
http://help.sap.com/bp_bl603/BBLibrary/HTML/138_EN_IN.htm
And also some other links as below.
http://www.sap-img.com/materials/sub-contracting-cycle.htm
http://www.sap-img.com/materials/subcontracting-key-points.htm
http://www.sap-img.com/materials/what-is-subsequent-adjustment-in-process-of-subcontracting.htm
Please check and revert if you have further queries.
Regards,
Hiren Ramani

RAR5.3 - Alert Generation background job repeatedly errors out

Hello,
We have an Alert Generation job that we've set up to run daily on
PR2/150 strictly for the Transaction Usage Report. We do not
use Alerts so the only parameter we set for this job is "Generate
Action Log." The job will run anywhere from 2 to 4 hours before it
errors out. Every time this job, this process overflows its allotment
on the backend of 4GB and consequently creates a system dump. The job
is just too big.
We've reviewed the powerpoint "Risk Analysis and Remediation Alerts,
Jayne Gibbon, Director of GRC Support, August 15 2008"
This powerpoint basically says Alert Generation jobs should run every 1-
4 hours, otherwise they can get very large. We applied note 1015921 to
change the Last Run Date in order to decrease the size of the job. The
farthest we were able to set the Last Run Date back and have the alert
generation job run successfully was 2 minutes. This is unacceptable for
us as we need the jobs to at least run for 1 hour time periods.
What can we do to ensure our alert generation jobs complete
successfully in a manageable time period?
Any info or guidance would be greatly appreciated!
Jes Behrens
Edited by: Jes Behrens on Jan 20, 2009 10:47 AM

there seems to be a problem with the SID table of your master data. test it with RSRV and repair any errors.
if this doesn't help return to the forum

Stopping Background job in Risk Analysis and Remediation

Similar Messages

Maybe you are looking for