Stopping clip from going back to beginning

When I watch my video in canvas, instead of stopping at the end of the sequence, it goes back to the very beginning. I don't know how to turn this off. I want to keep the playhead at the end, so I can add more video to the sequence. Thanks

You don't add 2 video clips in the Canvas.
You either drag your clips straight from the Browser, Viewer or Canvas into the Timeline.

Similar Messages

How do I stop backspace from going back one page?

I am trying to play Evony but whenever I press backspace it dumps me out of the game and goes back to the logn page.
I have tried adding an extension, but there are no how-to's telling me how tomake it work.
It has taken me 20 mins to post this because every time I try and type in this box the page gets reloaded and corrupted & I have to start again. Safari keeps reloading a help section within the text box then hangs, then crashes.
Ended up typing this in NOTEPAD and pasting it in.
Think I'll use Any Other Broser TBH.

OK, I have found that I cannot use Safari on this website!! I am now using Chrome to be ble to reply here!!
Whenever I use Safari, this txt box gets filled in with a web page telling me something cannot be found, then the browser hangs, then crashes.
Using Chrome, the backspace button does NOT navigate me back one page like it does in Safari.
Add that to the fact that the Safari browser cannot visit the Apple page and you have my answer.
DONT use Safari!!

Is there a way to prevent store from going back to beginning when browsing aps

I'm on an ipad2. When I browse a category in the app store and find something I would like to know more about, I tap on it and it brings me to the detailed page. After viewing the information I want to go back to the list of apps. When I do it takes me back to the beginning of the category at app number one, I then have to go thru. Page after page to get back to where I was previously, if I'm on app 556 of 3456. You can see that it would take a while. Is there a way I'm missing to take me back to where I left off?

When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

Timeline playhead goes back to beginning when it hits end

Is there a preference or something somewhere I need to
turn off to prevent the playhead in the timeline from
going back to the beginning of the timeline and start
playing again from the beginning, after it plays through
the entire timeline once and it's the end?
Thanks.

Why not mark it as 'Answered' (which you should do anyway) then post what you did to fix it. That would help others who encounter the same problem.
Ctrl+L toggles timeline looping.
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

How do I stop photos from syncing back onto my ipod

how do I stop photos from syncing back onto my ipod

Change the options on the Photos tab when the device is connected to iTunes, and on the device review your options under Settings > iCloud > Photos.
tt2

Save a Switcher from Going Back to a PC Tonight!

I've been using PCs for as long as I can remember. With parallels available to run Windows XP within OS X, I finally made the switch and bought an MBP. Two weeks and one exchange later, I'm planning to return my MBP tonight and buy a VAIO SZ or Thinkpad.
But the truth is, I'm hoping someone on this forum can save me from going back to a PC. I've posted individually on some of these issues below, but haven't read any solutions. If you've got a solution to any of the following, please let me know!
- HOT HOT HOT: This is my biggest problem. Completely idle w/ no programs open = 48C. Running a few apps = 60-65C. Peak = 78C. These seem in line with intelmactemp.com, but even the top/wristwrest at 65C is too uncomfortable to type on for longer than 1/2 hour. I've been waiting and hoping for thermal paste break-in, but no signs yet. Even then, I've read to expect only a 2-5C drop, which doesn't sound like much. I think I need 10C.
- EXCHANGE INTEGRATION: I use Goodlink on my Treo 700p, and sync Notes and Tasks with Exchange so that I never have to sync my Treo with my computer. Entourage is horrible, but would be acceptable if it synced Notes and Tasks. From my Google searches, it sounds like there is no way to edit and sync Notes and Tasks with Exchange in OS X. Anyone have a solution?
- GARAGEBAND HISS: When I record a podcast, I hear a hiss in the background every time I speak. Again, Google search and posts on forums yield nothing. This makes GarageBand unusable to me for podcasts.
- ICHAT QUALITY: The very first time I tested ichat with my brother, we got a huge screen with great quality. Clearly H.264 at work. In the 10 times since with him and friends, I haven't been able to get that screen, even while monitoring Network Doctor and plugging in directly to high-speed broadband connections. The quality now is worse than Skype video on Windows. Any clue what's going on?
So that's it. The rest I can live with: poor battery life, heavy laptop for features, lack of dual-layer, no PCMCIA like the VAIO SZ which has both PCMCIA and ExpressCard, etc. But the above is just killing me, both on the hardware and software front.
Please save me from switching!

Well I switched 2 years ago, some specific suggestions:
- HOT HOT HOT: This is my biggest problem. Completely idle w/ no programs open = 48C. Running a few apps = 60-65C. Peak = 78C.
--- Mine runs at 43 deg idle 50 deg running apps, so this has never been an issue for me. Sorry....
- EXCHANGE INTEGRATION: I use Goodlink on my Treo 700p, and sync Notes and Tasks with Exchange so that I never have to sync my Treo with my computer. Entourage is horrible, but would be acceptable if it synced Notes and Tasks. From my Google searches, it sounds like there is no way to edit and sync Notes and Tasks with Exchange in OS X. Anyone have a solution?
--- Exchange doesn't sync notes and tasks. I use the palm entourage conduit to sync calendar and addressbook, but gave up using notes and tasks to sync - they just live on my palm now.
- GARAGEBAND HISS: When I record a podcast, I hear a hiss in the background every time I speak. Again, Google search and posts on forums yield nothing. This makes GarageBand unusable to me for podcasts.
---- don't use Garageband
- ICHAT QUALITY:
--- I chat usually gets blocked by firewalls when I'm travelling so I use Skype for mac instead
So that's it. The rest I can live with: poor battery life, heavy laptop for features, lack of dual-layer, no PCMCIA like the VAIO SZ which has both PCMCIA and ExpressCard, etc. But the above is just killing me, both on the hardware and software front.
Please save me from switching!
The only thing I'd suggest is to get out of the PC 'habit'.
The OSX interface is much nicer with its 'floating' windows, widgets and expose features.
The adjustment pallets in office are great.
Most of all I like the look and feel of the true fonts rather than windowsvery bitmapped 'jaggy' ones.
IPhoto, iWeb and Aperture are great for photography
Mail is nicer to use than outlook
Spotlight is superb for finding things really fast
I simply couldn't work without iDisk for syncing my work and swapping files
Need I go on...?
Switching is about workarounds, giving some things up and finding new delights. You can't expect your mac to behave just like your PC as well as being a mac....
MacBook Pro Mac OS X (10.4.6)

Preventing the User from going back to the main page after logging out.

Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.

Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
     public void destroy() {
     public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
               ServletException {
          System.out.println("filter");
          HttpServletRequest request = (HttpServletRequest) arg0;
          if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
               System.out.println("redirecting ... ");
               RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
               d.forward(arg0, arg1);
          arg2.doFilter(arg0, arg1);
     public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
          <filter-name>test</filter-name>
          <filter-class>test.Test</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>test</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>

Encore CS4 Loop Point goes back to beginning

Hi all,
Thank you for your time reading this. I've searched the forum and didn't see a resolution for this type of issue. Please accept my apology if it is noted somewhere and I didn't find it.
I created a Motion Menu in After Effects CS3 that is 00;05;07;00
I then saved the layers as a psd files (I didn't create buttons within AE)
I created the buttons I wanted within Encore.
Turned off all of the layers in Encore except for the buttons that I created
I created an AVI file out of the After Effects composition which is set as the Motion menu in Encore
The only problem that I am having is that when the video ends it goes back to the very beginning of the motion menu instead of the Loop point I set at 00;00;14;00 (14 seconds if I did that right)
I have Animate buttons checked
Loop point: 00;00;14;00
Loop #: Forever
On the basic tab, for both End Action and Override I went to Specify link and chose the Motion menu(AVI) that I created. I checked the box at the bottom "Set to Loop Point"
I'm not really sure what I'm doing wrong. This is my first time with a Motion Menu, so I'm sure I'm doing something wrong.
Thank you for your time on this
Best regards
Jeff

Jeff,
Thanks for explaining.
I'm now using CS5 and I'd heard the two menu thing wasn't necessary any more so:
A week or so ago, I was trying to figure out the same thing. I posted this question here http://forums.adobe.com/thread/852185?tstart=30.
Unfortunately, there were no answers, and by then I had found in the Encore Help under Loop point (as you did) this group of instructions at the bottom
"Set menu loop back
You can set a loop point in a motion menu to a point from which you want the motion menu to loop, rather than the beginning. This is useful when the starting point and ending point of the motion menu are separated by a long interval.
Select the menu from the Menu panel.
On the Properties panel, set the loop point.
Select Specify Link from the End Action Options menu.
Select the target from the list, and then select Set To Loop Point, and click OK"
However, I can't get this to work similar to you problem. That is, if I select the "Play all, Scenes " menu as the target, since it has a motion menu, I can select "Set to loop point", since it's not greyed out.
However, if I select the next menu "Scenes" with no motion menu, the "set to loop point" is greyed out. If I select the Play all etc with the motion menu, then the loop point doesn't work ie it still loops back to the beginning of the motion menu.
I'm not sure what the work "taget" means from the last sentence in the suggestions.
I was hoping an Adobe person would chime in, but so far no luck.
I'm doing this in a SD project and not BluRay.
Sorry to ramble.
John

PROBLEM SOLVED "export clips from Color back into FCP & add transition"

If I have two clips that you cannot place a transition in between here is the only thing that worked for me.
I discovered this problem after I exported my movie clips from FCP 6 to Color and imported the color corrected files from Color back into FCP 6. I could no longer add transitions to any of my clips unless I made the following changes.
1. 1st check to see if the video clip has an audio track underneath it. If they are not linked Select the audio and the video track to be linked, hit Command "L" and you will see an underline under the audio and video name to show that they are now linked. Do the same for the adjoining video and audio track.
2. Next select all of the clips after the video clip you just selected by typing "tttt" this changes to the "Select All Tracks Forward Tool". Click on the track after the video track you just linked and it will select all of the tracks thereafter. Hit the "A" button to change back to the selection tool and move all of the selected tracks away from the previous video/audio track.
3. Next type "RR" this will change to the "Ripple" tool. Now click on end of the video track on the previous video clip and type -15 (for negative 15 frames). Then click on the beginning of other video clip to the right that you linked and type +15 (for plus 15 frames).
4. Type "tttt" to change back to the "Select All Tracks Forward Tool" the hit the "A" button to change back to the selection tool and drag all tracks back together again.
5. You may then drag and drop your transition in between both video clips.
I hope this helps someone...this is the only thing that worked for me!!!
Number1talent

I am working with mostly DVCPro ftg, with a few clips in MiniDV. I did have roughly 10 clips with speed changes, but they exported fine two weeks ago, when I did this the first time. (Actually, it didn't keep the speed changes, but it did export with media to FCP).
The clips do have reel numbers and seem to be of the right length per clip but there's just no picture and no assoicated media with which to relink the clip.
I'm on Color 1.5.3
Any possible ideas? Thank you for your help...

How do I stop iMac from going to sleep automatically after 15minutes of inactivity

How do I stop imac from shutting down automatically after 15minutes of inactivity, trying to play music but the imac keeps going to sleep, tried changing power saving preferences to never shut down, never go to sleep, unticked put the hard disks to sleep, automatically reduce brightness, but still goes to sleep.

Try a PRAM/NVRAM reset.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.

How do I stop Firefox from going to Google everytime I open the browser?

In my organization, we have well over 2,000 PCs. Every time Firefox is open, it connects to Google IPs (74.125.x.x) even when we are not on Google's site and do not have Google as the search provider. From what I understand (and correct me if I am wrong), Firefox links to Google for anti-phishing/anti-malware lists. The problem I have is with over 2,000 PCs going thru our web filter, it is bogging down our web filter with these connections.
Is there any way to stop Firefox from making these connections to Google (74.125.x.x)?

First update your firefox to 24.0 from [http://www.mozilla.org/en-US/firefox/all/ Mozilla.org].
Second In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
Search the string "browser.startup.homepage",double click on it and change the value. Then press OK and restart firefox

HT5824 can I stop contacts from going into icloud?

Other than removing my contacts from my iPhone 4S, can I stop my contacts from going into iCloud?

You could simply turn off iCloud contacts sync on your iPhone in "Settings > iCloud > Contacts".

Crazy little bug: audio inexplicably goes back to beginning

I imported a video clip from my Canon T3i in the standard .mov format with the audio recorded through a microphone onto the SD card in the camera.
I play the clip in Quicktime or other programs--no problems.
However, when I import the clip into Premiere Elements 10 about 2 minutes into the video the audio inexplicably restarts from the beginning. So, of course, everything is out of synch. Makes no sense.
I have tried to make a copy of the video clip and re-import that. I have restarted both Elements and my computer. I have tried to create a new project. I have made sure that the settings are correct--right video and audio settings...
I am at a loss. Thanks for any help.

Did you Copy over the full folder structure from your SD card? You will want to do that, and not just Copy over the media files. PrE (and PrPro) uses some of those other files.
Good luck,
Hunt

I need to disable the delete key from going back a page.

My son is doing online homeschooling. If he is taking a quiz and accidentally hits the delete key to correct a word in his answer the page goes back and he is kicked out of the quiz. I need to disable this function in Safari to protect him from this. Please help.

HI John,
That would require remapping. This thread has some links available that may help.
http://discussions.info.apple.com/message.jspa?messageID=11553590
Possibly http://www.hotkey.com. You can assign Command + Backspace as a shortcut for Delete.
Carolyn

How to stop iCloud from signing back on

Because apps always crash when iCloud is on, I wanted to sign off iCloud. But there's a REAL problem.
iCloud keeps signing back in! Pages, SimpleText, Keynotes, et al won't load document windows at all with iCloud enabled but if I sign out, it signs out and I could open the app... but minutes later, iCloud just signs back and it gets to stop apps from opening!
Here's what I do.
Open System Preferences. Click on iCloud icon. Sign out. It will bring up dialogs asking me to delete or not. I delete them. I don't want iCloud because it's just not mature.. it makes too many mistakes in terms of user interface (which is a shock considering Apple should know better). It signs out and it shows two textboxes with Apple ID and Password as placeholders. If I leave it alone, I can open the apps and a blank document window (or theme chooser) appear.
Then I close the System Preference. I again open System Preferences and click on iCloud... it's BACK ON! I never signed in! And once again, apps won't open at all.
I've tried EVERYTHING without luck. I turned off iCloud account and it still doesn't do a thing.
How do I stop iCloud from signing in? And even better, is there a way to remove iCloud from Mac?

This does not work for me. It only hides the videos in the cloud I have not on my ipad air. The videos I already downloaded are still there, taking space. When I look at the TV shows in the itunes interface it does not even show that they are on my iPad. I tried adding them, syncing. Then it shows two copies (both run) of said videos. I delete the video and only the one added from itunes is deleted. The copy I downloaded and watched from iCloud is still there and not removable or deletable. I did not have this problem in iOS6. I could manually delete videos no mater what way I put them on the iPad within the itunes interface. This is a new iPad air that I setup as new, using the iCloud to populate the apps and settings, and then I added some stuff manually from cloud. It seems to be alot diffreent in how it operates though and I had this with my old ipad3 and iOS7 as well. Hiding the videos does not remove them...what do I do now?
Since it is a fresh, new ipad setup that took quite some time to get passwords and such setup or from cloud settings I hate to reset and start over, that is a pain.

Stopping clip from going back to beginning

Similar Messages

Maybe you are looking for